Publicaitons - Marion Burgess

Burgess,M. Methods of controlling traffic noise impact, Chapter 11 (portion of chapter produced by Buna, B.) of Transportation Noise Reference Book, editor Nelson, P., Butterworths, London (1987)

Burgess,M., Lai,J.C.S. Sound Intensity - a report on the theory and application of sound intensity measurements, Department of Mechanical Engineering Report, ADFA, September 1987

Lai, J., Burgess,M. Some experiences with sound intensity measurements, Acoustics Australia, 16 (2), 55-56 (1988)
Burgess,M. Australian noise abatement policies - some findings on their effectiveness, Acoustics Australia, 17 (1), pp 15 -20 (1989)

Burgess,M. Sound intensity - a bibliography, Acoustics and Vibration Unit Report No 1, ADFA, 1989

Burgess,M. A review of the use of sound intensity measurements for determination of the acoustic properties of building materials, Acoustics and Vibration Unit Report No 2, ADFA, 1989

Burgess,M., Lai,J.C.S., Eisner, M. and Taylor,E. Speech privacy in open plan offices - post occupancy, Proc Ergonomics Society Conference, pp 351-354 (1989)

Lai, J.C.S., Burgess,M. Field measurement of transmission loss using the sound intensity technique, Proc Australian Acoustical Society Conference, pp 14.1-14.8 (1990)

Lai, J.C.S., Burgess,M. Radiation efficiency of acoustic guitars, Journal of Acoustical Society of America, 88, pp 1222-7 (1990)

Burgess, M. and Lai, J.C.S. Australian Approaches to Noise Abatement Policies Interdata Environment Resource Management Handbook, 2nd Ed, 1991, pp 173-178.

Lai J.C.S. & Burgess M. Application of the sound intensity technique to measurement of field sound transmission loss , Applied Acoustics 34 (1991) pp 77-87

Lai, J.C.S., Burgess M.A. and Mikl, K., Application of the sound intensity technique to measurements of acoustic properties of lightweight panels in an anechoic room, Internoise 91, Sydney, pp1025-1028 (1991)

Lai, J.C.S., Burgess M.A., Narang, P.P. and Mikl, K., Transmission loss measurements: Comparisons between sound intensity and conventional methods, Internoise 91, Sydney, pp1029-1032 (1991)

Lai, J.C.S., Burgess M.A. and Tacy, R.G.., Noise Control of a business machine: Towards managing the acoustic environment, Westprac IV, pp675-682 (1991)

Burgess MA and White A, Noise levels in hospital intensive are areas, Acoustics Australia, 20(2), 1992, pp 56-58

Burgess MA, Aircraft noise amelioration measures, 14th ICA, Beijing China September, China, International Commission on Acoustics,1992, Vol 2 E2-9

Burgess MA & *Zehner RB "Attitudes of residents , currently exposed to aircraft noise, to amelioration measures", Proceedings AAS Annual Conference, Glenelg, SA, 9-10 Nov, 178-185 (1993)

White A & Burgess M "Strategies for reduction of noise levels in ICUs", Australian Journal of Advanced Nursing, 10(2), 22 - 26 (1993)

Burgess MA & *Zehner R "Attitudes of residents exposed to aircraft noise to amelioration measures", NATO CCMS Symp on Aircraft Noise Abatement Receiver Technology, May, Baltimore, Session 10, Paper 3 (1994)

Brown AL & Burgess MA "Effects of slits on the performance of roadside timber barriers", Acoustics Australia 22(2), 41-45 (1994)

Burgess MA & *Zehner RB "Aircraft noise amelioration schemes - attitudes of residents to the options", Internoise 94, August, Yokohama, 239-242 (1994)

Lai JCS & Burgess M "Comparison of room acoustic descriptors for a large room - analysis and predictive techniques", Westprac V, Aug, Seoul, 551-556(1994)

Lai JCS, Burgess M, *Eisner M, *Taylor E & *Thurecht G "Application of measurement and predictive techniques for the acoustic evaluation of large multifunctional rooms", Aust Acoustical Soc Conference, Nov, Canberra , 1-8 (1994)
Macalpine S and Burgess M " Quantification of noise reduction from local area traffic management schemes" Internoise 95, July 10-12, Newport Beach, 537-540 (1995)

Burgess M "Occupational Health and Safety Monitoring Instrumentation - General and Specific Training", presented at Occupational Health and Safety Educators Conference, Sydney, 24 February 1996.

Boyley M, Burgess M & Williamson H "Some Experiences with Implementing a Noise Management Program in a Sheet Metal Industry Environment", Occupational Injury Symposium, Worksafe Australia, February 24-27, Sydney, Paper 55 (1996)

Burgess M "Trends in traffic noise research over 25 years" Internoise 96, 30July - 2Aug, Liverpool, 371-375 (1996)

Burgess M & Williamson H "Noise Control in industry - balance between engineering, ergonomics and production requirements", Proc Conference Ergonomics Soc and Safety Istitue Australia, 22-25 Sept, Canberra, no page nos, (1996)

Kanapathipillai S, Burgess M & Williamson H "Noise reduction for friction saws", Proc Australian Acoustical Soc Conference, 13-15 Nov, Brisbane, Stream 2 Paper 19, (1996)

Burgess M & Macalpine S "Approaches to environmental noise policy in Australia", Acoustics Australia, 24 (3), 87-90 (1996)

Williamson, H., Burgess, M. and Kanapathipillai S,. 'Friction sawing noise control - Final report', AVU Report No.9618 (1997).

Burgess, M. 'Report on current noise issues for Land Use Assessment', AVU Rep 9619 (1996).

Kanapathipillai S., Williamson, H., and Burgess, M., 'Helcor saw noise control project - Noise reduction trials: Further damping and combined effects', AVU Report No.9620 (1996).

Burgess, M., Williamson, H. and Speakman C. 'Improving the Performance of Noise Abatement Enclosures for Roll Former Shears' , AVU Report No.9623 (1997)

Burgess, M., Williamson, H. and Speakman C. 'Noise Reduction By Automatic Stacking For Roll Formed Sheet Metal Products - A Case Study', AVU Report No.9701 (1997).

Burgess, M., Williamson, H. and Speakman C. 'Retrofit Noise Reduction Techniques for the Control of Impact Noise in the Sheet Metal Industry - Final Report , AVU Report 9703 (1997)

Burgess M.A., Williamson H.M. & Kanapathipillai S."Noise reduction for friction saws" Internoise 97, 25-27 Aug, Budapest, 279-282 (1997)

Burgess M. "Effectiveness of the Noise Insulation Program for Houses around Sydney Airport" 5th Int Cong Sound & Vib, 15-18 Dec, Adelaide, 2623-2628 (1997)

Burgess, M., Williamson, H. and Kanapathipillai S,. 'Noise reduction for friction saws', Acoustics Australia 26(1), 9-12 (1998)

Burgess M & Bennett G "Some considerations in the environmental assessment of helicopter noise", Second Australian Pacific Vertiflight Conference on Helicopter Technology, 16-17 July, Canberra [no page numbers] (1998)

Williamson H.M, Lai, J.C.S., Burgess M.A., Bahrami A., and Speakman C., “Noise reduction for a sheet metal shear”, Canadian Acoustics, 26 (3), 23-24 (1998).

Burgess M., Williamson H.M., Speakman C., “Some Experiences With Noise Control For Roll Former Shears”, Internoise 98, 16-18 Nov, Christchurch paper 279 (1998)

Williamson HM, Burgess MA & Kanapathipillai S " Noise Reduction for a Pipe Cutting Operation", Spring Environmental Noise Conference, Banff Canada, 19-22 April, Paper 7, (1998)

Burgess M., Speakman C. and Williamson H.M “Noise reduction for sheet metal industry achieved with automatic stacker”, Acoustics Australia, 27 (1), 17-19 (1999).