 |
About | Mission and Goals | Rectors Office | Governance | Policy and Procedures | Visiting Canberra | Job Vacancies
Future Students | Current Students | Online Learning | Re-enrolment | Undergrad High Achievers Program | Contact
About | Postgraduate Opportunities | Scholarships | Funding | News | Forms | Ethics | Graduate Research School
MyUNSW | Campus Newsletter | Staff Development | OH&S | Staff Directories | Committees | Timetables | Important Dates
 |
Aerospace, Civil & Mechanical Engineering |
About | Contacts | Administration | Student Information | Student Activities | Research & Consulting | Seminars | Facilities | Location Map
Recently Completed Research Theses:
| 2002: | |
| Dickinson, L. | Non-destructive testing of honeycomb sandwich panels using a pitch-catch acoustic probe (ME) |
| Fulton, N. | Regional airspace design: a structured engineering approach (PhD) |
| Gaston, M. | A study of hypermixing scramjet fuel injectors (PhD) |
| Wu, W. | Fatigue crack porpagation behaviour of welded and weld-repaired 5083 aluminium alloy joints (ME) |
| 2001: | |
| P. Albina | Colour analysis of an internal combustion engine exhaust gas pipe fracture(ME) |
| Chen, S. | An improved low Reynolds number k-e model (PhD) |
| Li, J. | The mechanism of fretting wear and fretting fatigue and the analysis of fatigue failure of mechanical joints (PhD) |
| McLucas, A. | An investigation into the Integration of Qualitative and Quantitative Techniques for Addressing Systemic Complexity in the Context of Organisational Strategic Design-Making (PhD) |
| 2000: | |
| Bahrami, A. | Effects of tooling parameters on noise radiated from shear cutting of sheet metal (PhD) |
| Eager, D. | Acoustic analysis of an expanded metal press (PhD) |
| McMahon, S. | Object-oriented implementation of a Computational Fluid Dynamics Method (ME) |
| 1999: | |
| Dai, J. | Surface mobility of a thin plate over a rectangular contact area (PhD) |
| Heslehurst, R. | Application and interpretation of a holographic interferometry technique in the detection of defects in structural materials. (PhD) |
| Khatri, S. | A Numerical Investigation of the Physical processes Active in Evolution of Finite Depth Wind Waves (PhD) |
| Mirfenderisk, H. | An Experimental Investigation of Bottom Friction Effects on Ocean Waves (PhD) |
| Verhagen, L. | The Growth of Wind Waves in Water of Finite Depth (PhD) |
| Wang, C. | Vibro-acoustic analysis of inverter driven induction motors (PhD) |
| Wardani, S. | Behaviour of Cement Stabilised Subgrade to Cyclic Loading (PhD) |
| Zhou, X. | Computerized evaluation of holographic interferograms for fatigue crack detection in riveted lap joints (PhD) |
| Zhu, B. | Durability of Reinforced Concrete in Association with Chloride Induced Corrosion (ME) |
| 1998: | |
| Dickens, J.D. | Dynamic characterisation of vibration isolators (PhD) |
| Tarnopolsky, A. | Mixing between a supersonic main stream of air and a co-flowing supersonic helium jet (PhD) |
| Zhou, X. | Computerized evaluation of holographic interferograms for fatigue crack detection in riveted lap joints (PhD) |
| 1997: | |
| Chen, K. | Behaviour of Pavement Materials Under Cyclic Loading (PhD) |
| 1996: | |
| Nozhat, W.M. | Hydrodynamics and heat transfer of falling liquid films (PhD) |
| Wang, W.Y. | An investigation of diagnostic techniques for rolling element bearings under conditions of poor signal to noise ratio and multiple element faults (PhD) |
| Webb, A. | Baratropic Coastal Circulation on a Narrow Continental Shelf (PhD) |
| 1995-1986: | |
| Mallison, S.G. | Shock Wave/Boundary Layer Interaction at a Compression Corner in Hypervelcoity Flows (PhD, 1995) |
| Nasr, A. | Two parallel plane jets (PhD, 1995) |
| Khan, S.P. | Corrosion of Steel in Plain Cement Versus Fly Ash Concrete (PhD, 1994) |
| D. Lu | Inclined Wall Jets (PhD, 1994) |
| Zhuang, G.M. | Three Dimensional Finite Element Analysis of Structure and Foundation Interaction, (PhD, 1994) |
| Zhuang, Z.L. | Buckling of Thin Cracked Aircraft Structures (PhD, 1994) |
| Jewell, R. | Evaluating Corporate Plans and the Corporate Planning Process (PhD, 1993)) |
| Liu, B. | Prediction of Stress-Strain-Fabric Relationship Using a Particulate Model (PhD, 1993) |
| Teh, S.L. | A study of the interaction between a shock wave generated by a cone and the boundary layer on a plane surface in supersonic flow. (PhD, 1993) |
| Zhao, J. | Theoretical and Experimental Investigations of Eccentric Operation of Squeeze Film Damper Bearings. (PhD, 1993) |
| Chu, J. | Strain Softening Behavious of Granular Soils Under Strain Path Testing (PhD, 1991) |
| Li, S.Q. | Coupled Finite Element Analysis of Reinforced Embankments on Soft Clay (PhD, 1991) |
| Zhao, M.M. | Behaviour of Foundation of an Offshore Gravity Platform (PhD, 1991) |
| Magi, E. | Investigations in to the flow behind Castellated Blunt Trailing Edge Aerofoils at Supersonic Speed (PhD, 1990) |
| Miller, N.G. | A Methodology for Introducing Technology into Organisations (PhD, 1990) |
| Petrusma, M. | Near Wake Study of Segmented Blunt Trailing Edge Aerofoils in Subsonic Flow (PhD, 1990) |
| Grice, W. | Static Analysis of Thin Plates Using the Finite Strip-Element Method (ME, 1987) |
| Li, K.S. | Probabilistic Approaches to Slope Design (PhD, 1987) |
| Petrolito, J. | Macro Elements in Stress Analysis (PhD, 1986) |
Top of Page