Dr Jong-Leng Liow

Aeronautical Engineering Program Coordinator
School of Engineering and Information Technology
+61 2 6268 8009
+61 2 6268 8276
  • ABOUT
  • PUBLICATIONS

Dr Jong-Leng Liow is a Senior Lecturer in the School of Engineering and Information Technology at UNSW Canberra. For further information please see Dr Liow's School profile.

Book Chapters

Liow J-L, 2013, 'Environmental Impact in Micro-Device Manufacturing', in Davim JP (ed.), Sustainable Manufacturing, Wiley, NY, pp. 1 - 32, http://dx.doi.org/10.1002/9781118621653.ch1

Journal articles

Ong EES; Liow JL, 2019, 'The temperature-dependent structure, hydrogen bonding and other related dynamic properties of the standard TIP3P and CHARMM-modified TIP3P water models', Fluid Phase Equilibria, vol. 481, pp. 55 - 65, http://dx.doi.org/10.1016/j.fluid.2018.10.016

Ong EES; O’Byrne S; Liow JL, 2019, 'Yield stress measurement of a thixotropic colloid', Rheologica Acta, vol. 58, pp. 383 - 401, http://dx.doi.org/10.1007/s00397-019-01154-y

Gao R; O'Byrne S; Liow JL; Boyson TK, 2018, 'An experimental study of pressure distribution nonlinearity in a circular micro-tube', Experimental Thermal and Fluid Science, vol. 97, pp. 468 - 483, http://dx.doi.org/10.1016/j.expthermflusci.2018.05.020

Liow JL; Oakman OA, 2018, 'Performance of mini-axial hydrocyclones', Minerals Engineering, vol. 122, pp. 67 - 78, http://dx.doi.org/10.1016/j.mineng.2018.03.024

Khaleque A; Mironov EG; Osório JH; Li Z; Cordeiro CMB; Liu L; Franco MAR; Liow JL; Hattori HT, 2017, 'Integration of bow-tie plasmonic nanoantennas on tapered fibers', Optics Express, vol. 25, pp. 8986 - 8996, http://dx.doi.org/10.1364/OE.25.008986

Gao R; O’Byrne S; Sheehe SL; Kurtz J; Liow JL, 2017, 'Transient gas viscosity measurement using tunable diode laser absorption spectroscopy', Experiments in Fluids, vol. 58, http://dx.doi.org/10.1007/s00348-017-2438-3

Huang Y; Chen J; Wong T; Liow JL, 2016, 'Experimental and theoretical investigations of non-Newtonian electro-osmotic driven flow in rectangular microchannels', Soft Matter, vol. 12, pp. 6206 - 6213, http://dx.doi.org/10.1039/c6sm00408c

Zhu G; Liow JL; Neely A, 2015, 'Response to comment on "Experimental study of particle separation and the fish hook effect in a mini-hydrocyclone" [Chem. Eng. Sci. 111 (2014) 94-105]', Chemical Engineering Science, vol. 122, pp. 104 - 105, http://dx.doi.org/10.1016/j.ces.2014.08.059

Yeow YL; Liow J-L; Leong Y-K, 2014, 'Obtaining model-independent growth rates from experimental data of dry thermal oxidation of silicon', AIChE Journal, http://dx.doi.org/10.1002/aic.14375

Zhu G; Liow JL; Neely A, 2014, 'Corrigendum to "Experimental study of particle separation and the Fishhook effect in a mini-hydrocyclone" [Chem. Eng. Sci. 111 (2014) 94-105]', Chemical Engineering Science, vol. 118, pp. 280, http://dx.doi.org/10.1016/j.ces.2014.08.012

Zhu G; Liow J-L; Neely A, 2014, 'Experimental study of particle separation and the fishhook effect in a mini-hydrocyclone', Chemical Engineering Science, vol. 111, pp. 94 - 105, http://dx.doi.org/10.1016/j.ces.2014.02.017

Yeow YL; Guan B; Wu L; Yap TM; Liow JL; Leong YK, 2013, 'Obtaining the kinetic function of depolymerization from evolving molecular weight distribution data-an inverse problem', AIChE Journal, vol. 59, pp. 912 - 922, http://dx.doi.org/10.1002/aic.13878

Mondal S; Leong YK; Liow JL; Wickramasinghe SR, 2013, 'Flocculation of yeast suspensions by a cationic flocculant', Powder Technology, vol. 235, pp. 426 - 430, http://dx.doi.org/10.1016/j.powtec.2012.10.030

Jing X; Li H; Wang J; Liow JL, 2012, 'Experimental study of cutting forces in micro end-milling', Advanced Materials Research, vol. 500, pp. 357 - 362, http://dx.doi.org/10.4028/www.scientific.net/AMR.500.357

Zhu G; Liow JL; Neely A, 2012, 'Computational study of the flow characteristics and separation efficiency in a mini-hydrocyclone', Chemical Engineering Research and Design, vol. 90, pp. 2135 - 2147, http://dx.doi.org/10.1016/j.cherd.2012.05.020

Burrows AS; Liow JL; Brady K, 2012, 'Residence time study of a two-phase mixture in a horizontal cylindrical vessel', Chemical Engineering Research and Design, vol. 90, pp. 2155 - 2163, http://dx.doi.org/10.1016/j.cherd.2012.06.008

Yeow YL; Liow JL; Leong YK, 2012, 'A general procedure for obtaining the evolving particle-size distribution of flocculating suspensions', AIChE Journal, vol. 58, pp. 3043 - 3053, http://dx.doi.org/10.1002/aic.13710

Gu Z; Liow JL; Zhu G, 2012, 'Investigation on the droplet formation time with Xanthan Gum solutions at a T-junction', American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM, vol. 2, pp. 299 - 307, http://dx.doi.org/10.1115/FEDSM2012-72133

Liow J; Burrows AS; Brady K, 2012, 'Residence time study of a two-phase mixture in a horizontal cylindrical vessel', Chemical Engineering Research and Design, vol. 90, pp. 2155 - 2163, http://dx.doi.org/10.1016/j.cherd.2012.06.008

Rahman SMM; Liow JL, 2012, 'Development of a trajectory-based 3D surface roughness model for the micro end-milling process', Advances in Applied Mechanics Research, Conference Proceedings - 7th Australasian Congress on Applied Mechanics, ACAM 2012, pp. 419 - 424

Rahman SMM; Liow JL, 2010, 'Modelling and simulation of cutting forces in micromachining', Key Engineering Materials, vol. 443, pp. 652 - 656, http://dx.doi.org/10.4028/www.scientific.net/KEM.443.652

Wickramasinghe SR; Leong YK; Mondal S; Liow JL, 2010, 'Influence of cationic flocculant properties on the flocculation of yeast suspensions', Advanced Powder Technology, vol. 21, pp. 374 - 379, http://dx.doi.org/10.1016/j.apt.2010.02.006

Liow JL; Frye U, 2010, 'Surfaces machined by micro end-mills at constant chip load', Key Engineering Materials, vol. 443, pp. 232 - 237, http://dx.doi.org/10.4028/www.scientific.net/KEM.443.232

Jegatheesan V; Liow JL; Shu L; Kim SH; Visvanathan C, 2009, 'The need for global coordination in sustainable development', Journal of Cleaner Production, vol. 17, pp. 637 - 643, http://dx.doi.org/10.1016/j.jclepro.2008.11.016

Liow JL, 2009, 'Mechanical micromachining: a sustainable micro-device manufacturing approach?', Journal of Cleaner Production, vol. 17, pp. 662 - 667, http://dx.doi.org/10.1016/j.jclepro.2008.11.012

Jegatheesan V; Shu L; Liow JL; Sivakugan N, 2009, 'Editorial: Diverse challenges faced in developing sustainable catchments', Water, Air, and Soil Pollution: Focus, vol. 9, pp. 321 - 322, http://dx.doi.org/10.1007/s11267-009-9222-1

Liow JL, 2008, 'Peer assessment in thesis oral presentation', European Journal of Engineering Education, vol. 33, pp. 525 - 537, http://dx.doi.org/10.1080/03043790802564103

Liovic P; Rudman M; Liow JL; Lakehal D; Kothe D, 2006, 'A 3D unsplit-advection volume tracking algorithm with planarity-preserving interface reconstruction', Computers and Fluids, vol. 35, pp. 1011 - 1032, http://dx.doi.org/10.1016/j.compfluid.2005.09.003

Campbell GR; Leong YK; Berndt CC; Liow JL, 2006, 'Ammonium phosphate slurry rheology and particle properties-The influence of Fe(III) and Al(III) impurities, solid concentration and degree of neutralization', Chemical Engineering Science, vol. 61, pp. 5856 - 5866, http://dx.doi.org/10.1016/j.ces.2006.05.010

Liow JL; Juusela M; Gray NB; Šutalo ID, 2003, 'Entrainment of a Two-Layer Liquid through a Taphole', Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, vol. 34, pp. 821 - 832, http://dx.doi.org/10.1007/s11663-003-0088-8

Liow JL, 2002, 'Sloshing of Melts in a Bath Smelting Process Having an Elliptic Cross Section', ISIJ International, vol. 42, pp. 692 - 701

Liow J; Liovic P; Rudman M, 2002, 'Numerical modelling of free surface flows in metallurgical vessels', , vol. 26, pp. 113 - 140

Liow JL, 2002, 'Sloshing of melts in a bath smelting process having an elliptic cross section', ISIJ International, vol. 42, pp. 694 - 701, http://dx.doi.org/10.2355/isijinternational.42.694

Liovic P; Liow J-L; Rudman M, 2001, 'A Volume of Fluid (VOF) Method for the Simulation of Metallurgical Flows', ISIJ International, vol. 41, pp. 225 - 233, http://dx.doi.org/10.2355/isijinternational.41.225

Jong Leng L, 2001, 'Splash formation by spherical drops', Journal of Fluid Mechanics, vol. 427, pp. 73 - 105, http://dx.doi.org/10.1017/S0022112000002500

Morton D; Rudman M; Jong-Leng L, 2000, 'An investigation of the flow regimes resulting from splashing drops', Physics of Fluids, vol. 12, pp. 747 - 763, http://dx.doi.org/10.1063/1.870332

Liow J-L, 2000, 'Quasi-equilibrium bubble formation during top-submerged gas injection', Chemical Engineering Science, vol. 55, pp. 4515 - 4524, http://dx.doi.org/10.1016/S0009-2509(00)00095-6

Lawson NJ; Rudman M; Guerra A; Liow J-L, 1999, 'Experimental and numerical comparisons of the break-up of a large bubble', Experiments in Fluids, vol. 26, pp. 524 - 534, http://dx.doi.org/10.1007/s003480050319

Lawson NJ; Liow J-L, 1998, 'Low-cost design of 35 mm drum camera for high-resolution, high-speed image analysis', Review of Scientific Instruments, vol. 69, pp. 4195 - 4197, http://dx.doi.org/10.1063/1.1149230

LIOW J; TSIRIKIS P; GRAY N, 1998, 'Study of refractory wear in the tuyere region of a peirce-smith nickel convertor', Canadian Metallurgical Quarterly, vol. 37, pp. 99 - 117, http://dx.doi.org/10.1016/S0008-4433(98)00003-2

Liow JL; Tsirikis P; Gray NB, 1998, 'Study of refractory wear in the tuyere region of a Peirce-Smith nickel convertor', Canadian Metallurgical Quarterly, vol. 37, pp. 99 - 117, http://dx.doi.org/10.1179/cmq.1998.37.2.99

Jong-Leng L; Gray NB, 1996, 'Experimental study of splash generation in a flash smelting furnace', Metallurgical and Materials Transactions B, vol. 27, pp. 633 - 646, http://dx.doi.org/10.1007/BF02915661

Liow J-L; Dickinson WHR; Allan MJ; Gray NB, 1995, 'Study of slopping and splashing in a cylindrical bath with top-submerged injection', Metallurgical and Materials Transactions B, vol. 26, pp. 887 - 889, http://dx.doi.org/10.1007/BF02651734

Liow J; Kenney CN, 1991, 'The simple cycle of the pressure swing adsoprtion process', Chemical Engineering Research and Design, vol. 69A, pp. 215 - 220

Liow J-L; Kenney CN, 1990, 'The backfill cycle of the pressure swing adsorption process', AIChE Journal, vol. 36, pp. 53 - 65, http://dx.doi.org/10.1002/aic.690360108

Liow J-L; Gray NB, 1990, 'Slopping resulting from gas injection in a peircesmith converter: The period of the standing wave', Metallurgical Transactions B, vol. 21, pp. 657 - 664, http://dx.doi.org/10.1007/BF02654244

Liow J-L; Gray NB, 1990, 'Slopping resulting from gas injection in a peirce-smith converter: Water modeling', Metallurgical Transactions B, vol. 21, pp. 987 - 996, http://dx.doi.org/10.1007/BF02670269

Liow J-L; Gray NB, 1988, 'A model of bubble growth in wetting and non-wetting liquids', Chemical Engineering Science, vol. 43, pp. 3129 - 3139, http://dx.doi.org/10.1016/0009-2509(88)85122-4

Radcliffe DF; Thomas G; Liow JL, 1982, 'Direct measurement of external mass transfer in packed sorbent beds', AIChE Journal, vol. 28, pp. 344 - 346, http://dx.doi.org/10.1002/aic.690280226

Conference Papers

Wang C; Kayali O; Liow JL, 2019, 'Effect of electrostatic repulsion induced by superplasticizers on the flow behaviour of fly ash pastes', in Sustainable Construction Materials and Technologies, presented at

Ong EES; O'Byrne S; Liow JL, 2018, 'Molecular dynamics study on the structural and dynamic properties of xanthan gum in a dilute solution under the effect of temperature', in AIP Conference Proceedings, presented at , http://dx.doi.org/10.1063/1.5033388

Liow J-L, (eds.), 2018, 'A Low Cost Extensional Viscometer for Small Relaxation Times', in Proceedings of the 21st Australasian Fluid Mechanics Conference, The University of Adelaide, Adelaide, presented at 21st Australasian Fluid Mechanics Conference, Adelaide, 10 - 13 December 2018, http://dx.doi.org/https://people.eng.unimelb.edu.au/imarusic/proceedings/21/Contribution_582_final.pdf

Liow JL; Gu ZP, 2014, 'Drop formation at a T-junction with dilute xanthan gum solutions as the dispersed phase', in Proceedings of the 19th Australasian Fluid Mechanics Conference, AFMC 2014, presented at

Zhu G; Liow JL, 2013, 'Experimental and computational study of the causes of the fishhook effect in a mini-hydrocyclone', in Separations Division 2013 - Core Programming Area at the 2013 AIChE Annual Meeting: Global Challenges for Engineering a Sustainable Future, pp. 178 - 181, presented at

Yeow LY; Liow JL; Leong YK, 2013, 'A general procedure for solving the population balance equation in flocculating suspensions', in Particle Technology Forum 2013 - Core Programming Area at the 2013 AIChE Annual Meeting: Global Challenges for Engineering a Sustainable Future, pp. 97 - 99, presented at

Gu Z; Liow J; Zhu G, 2012, 'Investigation on the droplet formation time with xanthan gum solutions at a T-junction', in Proceedings of the ASME 2012 Fluids Engineering Division Summer Meeting FEDSM2012, ASME, Puerto Rico, pp. 1 - 9, presented at ASME 2012 Fluids Engineering Division Summer Meeting, Puerto Rico, 08 - 12 July 2012

Gu Z; Liow J, 2012, 'Micro-droplet formation with non-Newtonian solutions in microfluidic T-junctions with different inlet angles', in IEEE-NEMS 2012 Proceedings, IEEE-NEMS 2012, Kyoto, Japan, pp. 548 - 553, presented at IEEE-NEMS 2012, Kyoto, Japan, 05 - 08 March 2012

Zhu G; Liow J; Neely AJ, 2012, 'Study of the transitional flow and particle separation with a fishhook effect in a mini-hydrocyclone', in Proceedings of the ASME 2012 Fluids Engineering Division Summer Meeting FEDSM2012, ASME, Puerto Rico, pp. 1 - 10, presented at ASME 2012 Fluids Engineering Division Summer Meeting, Puerto Rico, 08 - 12 July 2012

Gu Z; Liow JL, 2012, 'Micro-droplet formation with non-Newtonian solutions in microfluidic T-junctions with different inlet angles', in 2012 7th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2012, pp. 423 - 428, presented at , http://dx.doi.org/10.1109/NEMS.2012.6196809

Zhu G; Liow JL; Neely A, 2012, 'Study of the transitional flow and particle separation with a fishhook effect in a mini-hydrocyclone', in American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM, pp. 289 - 298, presented at , http://dx.doi.org/10.1115/FEDSM2012-72095

Gu ZP; Liow JL, 2012, 'A force balance model for the size prediction of droplets formed at T-junction with xanthan gum solutions', in Proceedings of the 18th Australasian Fluid Mechanics Conference, AFMC 2012, presented at

Zhu GF; Liow JL; Neely AJ, 2012, 'Experimental study of the causes of the fishhook effect in a mini-hydrocyclone', in Proceedings of the 18th Australasian Fluid Mechanics Conference, AFMC 2012, presented at

Keith A; Britton P; Liow JL, 2012, 'Dip and drift in spin bowling', in Proceedings of the 18th Australasian Fluid Mechanics Conference, AFMC 2012, presented at

Zhu G; Liow J; Neely AJ, 2011, 'COMPUTATIONAL STUDY OF CENTRIFUGAL INSTABILITIES IN A MICRO-SIZED HYDROCYCLONE', in Chemeca 2011, Engineers Australia, Sydney, pp. 1 - 11, presented at Chemeca, Sydney, 18 - 21 September 2011

Gu Z; Liow J, 2011, 'MICRODROPLET FORMATION IN A T-JUNCTION WITH XANTHAN GUM SOLUTIONS', in Chemeca 2011, Engineers Australia, Sydney, pp. 1 - 10, presented at Chemeca 2011, Sydney, 18 - 21 September 2011

Zhu G; Liow JL; Neely A, 2010, 'Computational study of flow in a micro-sized hydrocyclone', in 17th Australasian Fluid Mechanics Conference 2010, pp. 51 - 54, presented at

Burrows AS; Liow JL; Brady K, 2010, 'Cold modelling of two phase separation in a rotary holding furnace', in 17th Australasian Fluid Mechanics Conference 2010, pp. 812 - 815, presented at

Wickramasinghe SR; Leong YK; Liow J, 2009, 'Influence of cationic flocculant properties on the flocculation of yeast suspensions', in Chemeca 2009, Engineers Australia, Perth, WA, presented at Engineering our Future: Are we up to the Challenge?, Perth, WA, 27 - 30 September 2009

Liow JL; Cole DE, 2009, 'High framing rate PIV studies of an impinging water drop', in Proceedings of SPIE - The International Society for Optical Engineering, presented at , http://dx.doi.org/10.1117/12.822487

Liow J; Cole DE, (eds.), 2008, 'Surface Profiles of Collapsing Cavities of Splash Drops', in CD-ROM, XXIInd Intl. Congr. Theor. & Appl. Mech. (ICTAM2008), Adelaide, Sth Aust, presented at XXIInd Intl. Congr. Theor. & Appl. Mech. (ICTAM2008), Adelaide, Sth Aust, 25 - 29 August 2008

Liow J; Frazer A; He Y; Eastwood K; Phan C, 2007, 'Control of acid mist formation in the electrowinning of copper', in Chemeca 2007: Academics and Industry Strengthening the Profession, Chemeca 2007: Academics and Industry Strengthening the Profession, Melbourne, Australia, presented at Chemeca 2007: Academics and Industry Strengthening the Profession, Melbourne, Australia, 23 - 26 September 2007

Liow JL; Cole DE, 2007, 'Bubble entrapment mechanisms during the impact of a water drop', in Proceedings of the 16th Australasian Fluid Mechanics Conference, 16AFMC, pp. 866 - 869, presented at

Oakman OA; Liow JL, 2006, 'Simulation and experimental validation of an axial-flow hydrocyclone', in Proceedings of the 20th Australasian Fluid Mechanics Conference, AFMC 2016, presented at

Cole DE; Liow J, 2005, 'High-framing rate PIV for vortex ring visualisation', in Proceedings of the 4th Australian Conference on Laser Diagnostics in Fluid Mechanics and Combustion, University of Adelaide, School of Mechanical Engineering, McLaren Vale, presented at 4th Australian Conference on Laser Diagnostics in Fluid Mechanics and Combustion, McLaren Vale, 07 - 09 December 2005

Cole DE; Liow J, 2005, 'Modelling the mixing in an elliptic top submerged gas injected vessel', in 33rd Australasian Chemical Engineering Conference (CHEMECA 2005): Smart Solutions-Doing More With Less, Curran Associates, Inc., Brisbane, Qld, presented at Chemeca 2005: Smart Solutions - "Doing More With Less", Brisbane, Qld, 25 - 28 September 2005

Cole DE; Liow J, 2005, 'Entrapment and rupture of large air pockets in liquid-liquid impacts', in 33rd Australasian Chemical Engineering Conference (CHEMECA 2005): Smart Solutions-Doing More With Less, Curran Associates, Inc., Brisbane, Qld, presented at Chemeca 2005: Smart Solutions - "Doing More With Less", Brisbane, Qld, 25 - 28 September 2005

Liow J, 2004, 'LES of turbulent bubble formation and break-up based on interface tracking', in Direct and Large-Eddy Simulation V, Springer, Munich university of Technology, presented at 5th international ERCOFTAC workshop on direct and large-eddy simulation, Munich university of Technology, 27 - 29 August 2003

Cole DE; Liow J, 2004, 'Bubble entrapment during water drop impacts', in Proceedings of the Fifteenth Australasian Fluid Mechanics Conference, The University of Sydney, Sydney, presented at Australasian Fluid Mechanics Conference 2004, Sydney, 13 - 17 December 2004

Liow J, 2004, 'Numerical simulation of drop formation in a T-shaped microchannel', in Proceedings of the Fifteenth Australasian Fluid Mechanics Conference, The University of Sydney, Sydney, presented at Australasian Fluid Mechanics Conference 2004, Sydney, 13 - 17 December 2004

Liow J; Cole DE, 2004, 'Drop formation in T-junction microchannels', in 32nd Australasian Chemical Engineering Conference, 32nd Australasian Chemical Engineering Conference, Sydney, presented at 32nd Australasian Chemical Engineering Conference, Sydney, 26 - 29 September 2004

Pennisi S; Liow J; Schneider P, 2004, 'CFD model development for a final effect evaporator', in Proceedings of the Association of Sugar Cane Technologists, Association of Sugar Cane Technologists, Brisbane, Australia, presented at Association of Sugar Cane Technologists, Brisbane, Australia, 01 - 05 May 2004

Liovic P; Lakehal D; Liow J, 2003, 'LES of turbulent bubble formation and break-up using interface tracking-based simulation', in Direct and Large-Eddy Simulation V, Springer, Munich university of Technology, presented at 5th international ERCOFTAC workshop on direct and large-eddy simulation, Munich university of Technology, 27 - 29 August 2003

Pennisi S; Liow J; Schneider P, 2003, 'CFD modelling of a sugar evaporator', in Proceedings of the third International Conference on Computational Fluid Dynamics in the Minerals and Process Industries, 3rd International Conference on CFD in the Mineral and Processing Industry, Melbourne, presented at 3rd International Conference on CFD in the Mineral and Processing Industry, Melbourne, 10 - 12 December 2003

Liow JL; Assaad GE; Liovic P; Gray NB; Rudman MR, 1999, 'Modelling of slag-skimming in a Peirce-Smith converter', in 4th International Conference COPPER 99-COBRE 99, pp. 417 - 431, presented at

Liovic P; Rudman M; Assaad G; Liow JL, 1998, 'Entrainment phenomena associated with multi-liquid flow over a weir', in Proceedings of the 1998 Thirteenth Australasian Fluid Mechanics Conference, Melbourne, Australia, 13-18 December 1998 (Volume 2), pp. 925 - 928, presented at

Assaad GE; Liow JL; Gray NB, 1998, 'Slag-metal flow over a weir', in Proceedings of the 1998 Thirteenth Australasian Fluid Mechanics Conference, Melbourne, Australia, 13-18 December 1998, pp. 445 - 448, presented at

Morton DE; Rudman MJ; Liow JL, 1997, 'Finite difference method for modelling impacting drops', in American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, presented at

Liow JL; Morton DE; Guerra AE; Gray NB, 1996, 'Dynamics of splash formation in gas injected systems', in The Howard Worner International Symposium on Injection in Pyrometallurgy, pp. 175 - 185, presented at

Jong-Leng L; Guerra AE; Gray NB, 1996, 'Interactions of large gas bubbles with fluid interfaces', in TMS Annual Meeting, pp. 175 - 188, presented at

Liow JL; Lawson N; Laird G; Gray NB, 1996, 'Experimental methods in gas injection into liquid systems', in The Howard Worner International Symposium on Injection in Pyrometallurgy, pp. 221 - 236, presented at

Jong-Leng L; Gray NB, 1993, 'Effect of splash generation on the performance of gas injected processes', in First International Conference on Processing Materials for Properties, pp. 341 - 344, presented at

Conference Posters

Gu Z; Liow J, 2012, 'Microdroplet Formation in a T-junction with Xanthan Gum Solutions', in 3rd International Conference on Advances in Microfluidics and Nanofluidics (AMN 2012), Unknown, Dalian, China, pp. 1 - 3, presented at 3rd International Conference on Advances in Microfluidics and Nanofluidics (AMN 2012), Dalian, China, 23 - 26 May 2012

Gu Z; Liow J, 2012, 'Investigation on the droplet formation time with xanthan gum solutions at a T-junction', in 3rd International Conference on Advances in Microfluidics and Nanofluidics (AMN 2012), Unknown, Dalian, China, pp. 1 - 3, presented at 3rd International Conference on Advances in Microfluidics and Nanofluidics (AMN 2012), Dalian, China, 23 - 26 May 2012