Journal articles

Chen C; Chiew SP; Zhao MS; Lee CK; Fung TC, 2019, 'Welding effect on tensile strength of grade S690Q steel butt joint', Journal of Constructional Steel Research, vol. 153, pp. 153 - 168, http://dx.doi.org/10.1016/j.jcsr.2018.10.009

Rana MM; Khan A; Del Linz P; Lee CK; Fung TC, 2019, 'Effect of cased charges on plain steel and steel-concrete sandwich targets', Thin-Walled Structures, vol. 136, pp. 302 - 314, http://dx.doi.org/10.1016/j.tws.2018.12.022

Kabir MI; Lee CK; Rana MM; Zhang YX, 2019, 'Flexural and bond-slip behaviours of engineered cementitious composites encased steel composite beams', Journal of Constructional Steel Research, vol. 157, pp. 229 - 244, http://dx.doi.org/10.1016/j.jcsr.2019.02.032

Xu J; Lee CK; Tan KH, 2019, 'A study on the locally high-gradient displacement field resulted from plastic hinges in steel beams', Advances in Structural Engineering, vol. 22, pp. 2345 - 2358, http://dx.doi.org/10.1177/1369433219839814

Meng D; Zhang YX; Lee CK, 2019, 'Flexural fatigue behaviour of steel reinforced PVA-ECC beams', Construction and Building Materials, vol. 221, pp. 384 - 398, http://dx.doi.org/10.1016/j.conbuildmat.2019.06.088

Rana MM; Lee CK; Al-Deen S; Zhang YX, 2018, 'Flexural behaviour of steel composite beams encased by engineered cementitious composites', Journal of Constructional Steel Research, vol. 143, pp. 279 - 290, http://dx.doi.org/10.1016/j.jcsr.2018.01.004

Lim NS; Tan KH; Lee CK, 2018, 'A simplified model for alternate load path assessment in RC structures', Engineering Structures, vol. 171, pp. 696 - 711, http://dx.doi.org/10.1016/j.engstruct.2018.05.074

Jiang J; Zhang J; Liu J; Chiew SP; Lee CK, 2018, 'Effect of welding and heat treatment on strength of high-strength steel columns', Journal of Constructional Steel Research, vol. 151, pp. 238 - 252, http://dx.doi.org/10.1016/j.jcsr.2018.09.027

Jiang J; Chiew SP; Lee CK; Tiong PLY, 2017, 'A numerical study on residual stress of high strength steel box column', Journal of Constructional Steel Research, vol. 128, pp. 440 - 450, http://dx.doi.org/10.1016/j.jcsr.2016.09.015

Chen C; Zhang X; Zhao M; Lee CK; Fung TC; Chiew SP, 2017, 'Effects of Welding on the Tensile Performance of High Strength Steel T-stub Joints', Structures, vol. 9, pp. 70 - 78, http://dx.doi.org/10.1016/j.istruc.2016.09.008

Jiang J; Chiew SP; Lee CK; Tiong PLY, 2017, 'An experimental study on residual stresses of high strength steel box columns', Journal of Constructional Steel Research, vol. 130, pp. 12 - 21, http://dx.doi.org/10.1016/j.jcsr.2016.11.025

Zhao MS; Lee CK; Fung TC; Chiew SP, 2017, 'Impact of welding on the strength of high performance steel T-stub joints', Journal of Constructional Steel Research, vol. 131, pp. 110 - 121, http://dx.doi.org/10.1016/j.jcsr.2016.12.023

Meng D; Huang T; Zhang YX; Lee CK, 2017, 'Mechanical behaviour of a polyvinyl alcohol fibre reinforced engineered cementitious composite (PVA-ECC) using local ingredients', Construction and Building Materials, vol. 141, pp. 259 - 270, http://dx.doi.org/10.1016/j.conbuildmat.2017.02.158

Weng J; Tan KH; Lee CK, 2017, 'Modeling progressive collapse of 2D reinforced concrete frames subject to column removal scenario', Engineering Structures, vol. 141, pp. 126 - 143, http://dx.doi.org/10.1016/j.engstruct.2017.03.018

Lim NS; Tan KH; Lee CK, 2017, 'Experimental studies of 3D RC substructures under exterior and corner column removal scenarios', Engineering Structures, vol. 150, pp. 409 - 427, http://dx.doi.org/10.1016/j.engstruct.2017.07.041

Huang T; Zhang YX; Lo SR; Lee CK, 2017, 'Experimental study on crack bridging in engineered cementitious composites under fatigue tensile loading', Construction and Building Materials, vol. 154, pp. 167 - 175, http://dx.doi.org/10.1016/j.conbuildmat.2017.07.193

Meng D; Lee CK; Zhang YX, 2017, 'Flexural and shear behaviours of plain and reinforced polyvinyl alcohol-engineered cementitious composite beams', Engineering Structures, vol. 151, pp. 261 - 272, http://dx.doi.org/10.1016/j.engstruct.2017.08.036

Weng J; Tan KH; Lee CK, 2017, 'Adaptive superelement modeling for progressive collapse analysis of reinforced concrete frames', Engineering Structures, vol. 151, pp. 136 - 152, http://dx.doi.org/10.1016/j.engstruct.2017.08.024

Jiang J; Chiew SP; Lee CK; Tiong PLY, 2017, 'Numerical investigation of high-strength built-up box columns', Proceedings of the Institution of Civil Engineers: Structures and Buildings, vol. 170, pp. 653 - 663, http://dx.doi.org/10.1680/jstbu.16.00111

Weng J; Lee CK; Tan KH; Lim NS, 2017, 'Damage assessment for reinforced concrete frames subject to progressive collapse', Engineering Structures, vol. 149, pp. 147 - 160, http://dx.doi.org/10.1016/j.engstruct.2016.07.038

Krauthammer T; Lee CK; Zhao Z, 2017, 'Guest Editorial', Engineering Structures, vol. 149, pp. 1, http://dx.doi.org/10.1016/j.engstruct.2017.09.003

Lim NS; Tan KH; Lee CK, 2017, 'Effects of rotational capacity and horizontal restraint on development of catenary action in 2-D RC frames', Engineering Structures, vol. 153, pp. 613 - 627, http://dx.doi.org/10.1016/j.engstruct.2017.09.059

Zhao MS; Chiew SP; Lee CK, 2016, 'Post weld heat treatment for high strength steel welded connections', Journal of Constructional Steel Research, vol. 122, pp. 167 - 177, http://dx.doi.org/10.1016/j.jcsr.2016.03.015

Zhao MS; Lee CK; Chiew SP, 2016, 'Tensile behavior of high performance structural steel T-stub joints', Journal of Constructional Steel Research, vol. 122, pp. 316 - 325, http://dx.doi.org/10.1016/j.jcsr.2016.04.001

Chiew SP; Jin YF; Lee CK, 2016, 'Residual stress distribution of roller bending of steel rectangular structural hollow sections', Journal of Constructional Steel Research, vol. 119, pp. 85 - 97, http://dx.doi.org/10.1016/j.jcsr.2015.12.016

Del Linz P; Fan SC; Lee CK, 2016, 'Modeling of combined impact and blast loading on reinforced concrete slabs', Latin American Journal of Solids and Structures, vol. 13, pp. 2266 - 2282, http://dx.doi.org/10.1590/1679-78252516

Long X; Lee CK, 2015, 'Improved strut-and-tie method for 2D RC beam-column joints under monotonic loading', Computers and Concrete, vol. 15, pp. 807 - 831, http://dx.doi.org/10.12989/cac.2015.15.5.807

Chiew SP; Zhao MS; Lee CK, 2015, 'Fatigue performance of high strength steel built-up box T-joints', Journal of Constructional Steel Research, vol. 106, pp. 296 - 310, http://dx.doi.org/10.1016/j.jcsr.2014.12.018

Jiang J; Lee CK; Chiew SP, 2015, 'Residual stress and stress concentration effect of high strength steel built-up box T-joints', Journal of Constructional Steel Research, vol. 105, pp. 164 - 173, http://dx.doi.org/10.1016/j.jcsr.2014.11.008

Fan SC; Lee CK; Kang KW; Wu ZJ, 2015, 'Validation of a flight model for predicting debris trajectory from the explosion of an ammunition storage magazine', Journal of Wind Engineering and Industrial Aerodynamics, vol. 136, pp. 114 - 126, http://dx.doi.org/10.1016/j.jweia.2014.11.004

Xu J; Lee CK; Fan SC, 2015, 'A Study on the Ricochet of Concrete Debris Against Soil', International Journal of Computational Methods, vol. 12, http://dx.doi.org/10.1142/S0219876215400095

Long X; Lee CK, 2015, 'Modelling of two dimensional reinforced concrete beam-column joints subjected to monotonic loading', Advances in Structural Engineering, vol. 18, pp. 1461 - 1474, http://dx.doi.org/10.1260/1369-4332.18.9.1461

Long X; Tan KH; Lee CK, 2014, 'Bond stress-slip prediction under pullout and dowel action in reinforced concrete joints', ACI Structural Journal, vol. 111, pp. 977 - 987, http://dx.doi.org/10.14359/51686816

Long X; Bao JQ; Tan KH; Lee CK, 2014, 'Numerical simulation of reinforced concrete beam/column failure considering normal-shear stress interaction', Engineering Structures, vol. 74, pp. 32 - 43, http://dx.doi.org/10.1016/j.engstruct.2014.05.011

Fan SC; Yu QJ; Lee CK, 2014, 'Simulation of fracture/breakup of concrete magazine using cohesive element', Materialwissenschaft und Werkstofftechnik, vol. 45, pp. 385 - 396, http://dx.doi.org/10.1002/mawe.201400237

Lee CK; Chiew SP; Jiang J, 2014, 'Residual stress of high strength steel box T-joints Part 2: Numerical study', Journal of Constructional Steel Research, vol. 98, pp. 73 - 87, http://dx.doi.org/10.1016/j.jcsr.2014.02.010

Chiew SP; Zhao MS; Lee CK, 2014, 'Mechanical properties of heat-treated high strength steel under fire/post-fire conditions', Journal of Constructional Steel Research, vol. 98, pp. 12 - 19, http://dx.doi.org/10.1016/j.jcsr.2014.02.003

Chiew SP; Lee CK; Jin YF; Cai YQ, 2014, 'Impact of Structural Eurocodes on steel and composite structures', IES Journal Part A: Civil and Structural Engineering, vol. 7, pp. 1 - 10, http://dx.doi.org/10.1080/19373260.2013.867585

Lee CK; Chiew SP; Jiang J, 2014, 'Residual stress of high strength steel box T-joints: Part 1: Experimental study', Journal of Constructional Steel Research, vol. 93, pp. 20 - 31, http://dx.doi.org/10.1016/j.jcsr.2013.10.003

Xu J; Lee CK; Fan SC; Kang KW, 2014, 'A study on the ricochet of concrete debris on sand', International Journal of Impact Engineering, vol. 65, pp. 56 - 68, http://dx.doi.org/10.1016/j.ijimpeng.2013.11.003

Long X; Tan KH; Lee CK, 2013, 'A 3D co-rotational beam element for steel and RC framed structures', Structural Engineering and Mechanics, vol. 48, pp. 587 - 613, http://dx.doi.org/10.12989/sem.2013.48.5.587

Long X; Yuan W; Tan KH; Lee CK, 2013, 'A superelement formulation for efficient structural analysis in progressive collapse', Structural Engineering and Mechanics, vol. 48, pp. 309 - 331, http://dx.doi.org/10.12989/sem.2013.48.3.309

Xu J; Lee CK; Tan KH, 2013, 'An XFEM frame for plate elements in yield line analyses', International Journal for Numerical Methods in Engineering, vol. 96, pp. 150 - 175, http://dx.doi.org/10.1002/nme.4535

Bao JQ; Long X; Tan KH; Lee CK, 2013, 'A new generalized Drucker-Prager flow rule for concrete under compression', Engineering Structures, vol. 56, pp. 2076 - 2082, http://dx.doi.org/10.1016/j.engstruct.2013.08.025

Xu J; Lee CK; Tan KH, 2013, 'An enriched 6-node MITC plate element for yield line analysis', Computers and Structures, vol. 128, pp. 64 - 76, http://dx.doi.org/10.1016/j.compstruc.2013.07.008

Lee CK; Chiew SP, 2013, 'An efficient modified flanges only method for plate girder bending resistance calculation', Journal of Constructional Steel Research, vol. 89, pp. 98 - 106, http://dx.doi.org/10.1016/j.jcsr.2013.06.012

Lee CK; Chiew SP; Jiang J, 2013, '3D residual stress modelling of welded high strength steel plate-to-plate joints', Journal of Constructional Steel Research, vol. 84, pp. 94 - 104, http://dx.doi.org/10.1016/j.jcsr.2013.02.007

Xu J; Lee CK; Tan KH, 2013, 'An XFEM plate element for high gradient zones resulted from yield lines', International Journal for Numerical Methods in Engineering, vol. 93, pp. 1314 - 1344, http://dx.doi.org/10.1002/nme.4448

Lee CK; Chiew SP; Jiang J, 2012, 'Residual stress study of welded high strength steel thin-walled plate-to-plate joints part 2: Numerical modeling', Thin-Walled Structures, vol. 59, pp. 120 - 131, http://dx.doi.org/10.1016/j.tws.2012.04.001

Xu J; Lee CK; Tan KH, 2012, 'A two-dimensional co-rotational Timoshenko beam element with XFEM formulation', Computational Mechanics, vol. 49, pp. 667 - 683, http://dx.doi.org/10.1007/s00466-011-0670-x

Lee CK; Chiew SP; Jiang J, 2012, 'Residual stress study of welded high strength steel thin-walled plate-to-plate joints, Part 1: Experimental study', Thin-Walled Structures, vol. 56, pp. 103 - 112, http://dx.doi.org/10.1016/j.tws.2012.03.015

Borges L; Chiew SP; Nussbaumer A; Lee CK, 2012, 'Advanced numerical modeling of cracked tubular K joints: BEM and FEM comparison', Journal of Bridge Engineering, vol. 17, pp. 432 - 442, http://dx.doi.org/10.1061/(ASCE)BE.1943-5592.0000274

Chiew SP; Yu Y; Lee CK, 2011, 'Bond failure of steel beams strengthened with FRP laminates - Part 1: Model development', Composites Part B: Engineering, vol. 42, pp. 1114 - 1121, http://dx.doi.org/10.1016/j.compositesb.2011.02.015

Lee CK; Chiew SP; Lie ST; Sopha T, 2011, 'Comparison of fatigue performances of gapped and partially overlapped CHS K-joints', Engineering Structures, vol. 33, pp. 44 - 52, http://dx.doi.org/10.1016/j.engstruct.2010.09.016

Lee CK; Chiew SP; Lie ST; Sopha T, 2011, 'Stress concentration factor prediction by the multi-dimensional Lagrangian interpolation method', Engineering Fracture Mechanics, vol. 78, pp. 1008 - 1028, http://dx.doi.org/10.1016/j.engfracmech.2010.11.013

Yu Y; Chiew SP; Lee CK, 2011, 'Bond failure of steel beams strengthened with FRP laminates - Part 2: Verification', Composites Part B: Engineering, vol. 42, pp. 1122 - 1134, http://dx.doi.org/10.1016/j.compositesb.2011.03.016

Lee CK; Chiew SP; Lie ST; Nguyen TBN, 2010, 'Adaptive mesh generation procedures for thin-walled tubular structures', Finite Elements in Analysis and Design, vol. 46, pp. 114 - 131, http://dx.doi.org/10.1016/j.finel.2009.06.011

Lee CK; Chiew SP; Lie ST; Nguyen TBN, 2009, 'Fatigue study of partially overlapped circular hollow section K-joints. Part 1: Geometrical models and mesh generation', Engineering Fracture Mechanics, vol. 76, pp. 2445 - 2463, http://dx.doi.org/10.1016/j.engfracmech.2009.08.006

Chiew SP; Lee CK; Lie ST; Nguyen TBN, 2009, 'Fatigue study of partially overlapped circular hollow section K-joints. Part 2: Experimental study and validation of numerical models', Engineering Fracture Mechanics, vol. 76, pp. 2408 - 2428, http://dx.doi.org/10.1016/j.engfracmech.2009.08.005

Lee CK; Chiew SP; Lie ST; Sopha T; Nguyen TBN, 2009, 'Experimental studies on stress concentration factors for partially overlapped circular hollow section K-joints', Advanced Steel Construction, vol. 5, pp. 481 - 499

Chiew SP; Lee CK; Lie ST, 2009, 'Research on tubular joints at Nanyang Technological University', IES Journal Part A: Civil and Structural Engineering, vol. 2, pp. 68 - 84, http://dx.doi.org/10.1080/19373260802582675

Lee CK; Xu QX, 2008, 'Automatic adaptive FE analysis of thin-walled structures using 3D solid elements', International Journal for Numerical Methods in Engineering, vol. 76, pp. 183 - 229, http://dx.doi.org/10.1002/nme.2315

Sopha T; Nguyen TBN; Chiew SP; Lee CK; Lie ST, 2008, 'Stress analysis and fatigue test on partially overlapped chs K-joints', Advanced Steel Construction, vol. 4, pp. 134 - 146

Lee CK; Shuai YY, 2007, 'On adaptive refinement analysis for the coupled boundary element method - Reproducing kernel particle method', International Journal of Computational Methods in Engineering Science and Mechanics, vol. 8, pp. 263 - 272, http://dx.doi.org/10.1080/15502280701334392

Lee CK; Shuai YY, 2007, 'An automatic adaptive refinement procedure for the reproducing kernel particle method. Part II: Adaptive refinement', Computational Mechanics, vol. 40, pp. 415 - 427, http://dx.doi.org/10.1007/s00466-006-0113-2

Lee CK; Chiew SP; Lie ST; Ji HL, 2007, 'Fatigue behaviors of square-to-square hollow section T-joint with corner crack. II: Numerical modeling', Engineering Fracture Mechanics, vol. 74, pp. 721 - 738, http://dx.doi.org/10.1016/j.engfracmech.2006.06.021

Chiew SP; Lee CK; Lie ST; Ji HL, 2007, 'Fatigue behaviors of square-to-square hollow section T-joint with corner crack. I: Experimental studies', Engineering Fracture Mechanics, vol. 74, pp. 703 - 720, http://dx.doi.org/10.1016/j.engfracmech.2006.06.022

Lee CK; Shuai YY, 2007, 'An automatic adaptive refinement procedure for the reproducing kernel particle method. Part I: Stress recovery and a posteriori error estimation', Computational Mechanics, vol. 40, pp. 399 - 413, http://dx.doi.org/10.1007/s00466-006-0140-z

Lie ST; Yang ZM; Chiew SP; Lee CK, 2007, 'The ultimate behaviour of cracked square hollow section T-joints', Advanced Steel Construction, vol. 3, pp. 443 - 458

Lie ST; Shao YB; Lee CK; Chiew SP, 2006, 'Stress intensity factor solutions for semi-elliptical weld-toe cracks in tubular K-joints', Advances in Structural Engineering, vol. 9, pp. 129 - 139, http://dx.doi.org/10.1260/136943306776232891

Lie ST; Lee CK; Chiew SP; Yang ZM, 2006, 'A consistent crack modelling and analysis of rectangular hollow section joints', Finite Elements in Analysis and Design, vol. 42, pp. 639 - 649, http://dx.doi.org/10.1016/j.finel.2005.08.007

Chiew SP; Lie ST; Lee CK; Ji HL, 2006, 'Crack surface under weld toe in square hollow section T-Joints', Welding in the World, vol. 50, pp. 559 - 566

Chiew SP; Lie ST; Lee CK; Yu Y, 2006, 'Bond failure investigation of CFRP-steel adhesive joints', Advanced Steel Construction, vol. 2, pp. 185 - 198

Lie ST; Chiew SP; Lee CK; Yang ZM, 2006, 'Static strength of cracked square hollow section T joints under axial loads. I: Experimental', Journal of Structural Engineering, vol. 132, pp. 368 - 377, http://dx.doi.org/10.1061/(ASCE)0733-9445(2006)132:3(368)

Lie ST; Lee CK; Chiew SP; Yang ZM, 2006, 'Static strength of cracked square hollow section T joints under axial loads. II: Numerical', Journal of Structural Engineering, vol. 132, pp. 378 - 386, http://dx.doi.org/10.1061/(ASCE)0733-9445(2006)132:3(378)

Lie ST; Lee CK; Chiew SP; Shao YB, 2005, 'Mesh modelling and analysis of cracked uni-planar tubular K-joints', Journal of Constructional Steel Research, vol. 61, pp. 235 - 264, http://dx.doi.org/10.1016/j.jcsr.2004.05.006

Lee CK; Tjhen LS; Chiew SP; Yongbo S, 2005, 'Numerical models verification of cracked tubular T, Y and K-joints under combined loads', Engineering Fracture Mechanics, vol. 72, pp. 983 - 1009, http://dx.doi.org/10.1016/j.engfracmech.2004.07.006

Lee CK; Xu QX, 2005, 'A new automatic adaptive 3D solid mesh generation scheme for thin-walled structures', International Journal for Numerical Methods in Engineering, vol. 62, pp. 1519 - 1558, http://dx.doi.org/10.1002/nme.1239

Lie ST; Lee CK; Chiew SP; Shao YB, 2005, 'Validation of surface crack stress intensity factors of a tubular K-joint', International Journal of Pressure Vessels and Piping, vol. 82, pp. 610 - 617, http://dx.doi.org/10.1016/j.ijpvp.2005.03.002

Fan SC; Liu X; Lee CK, 2004, 'Enriched partition-of-unity finite element method for stress intensity factors at crack tips', Computers and Structures, vol. 82, pp. 445 - 461, http://dx.doi.org/10.1016/j.compstruc.2003.10.019

Lee CK; Zhou CE, 2004, 'On error estimation and adaptive refinement for element free Galerkin method: Part I: Stress recovery and a posteriori error estimation', Computers and Structures, vol. 82, pp. 413 - 428, http://dx.doi.org/10.1016/j.compstruc.2003.10.018

Lee CK; Zhou CE, 2004, 'On error estimation and adaptive refinement for element free Galerkin method: Part II: Adaptive refinement', Computers and Structures, vol. 82, pp. 429 - 443, http://dx.doi.org/10.1016/j.compstruc.2003.10.017

Lee CK; Lie ST; Shuai YY, 2004, 'On coupling of reproducing kernel particle method and boundary element method', Computational Mechanics, vol. 34, pp. 282 - 297, http://dx.doi.org/10.1007/s00466-004-0572-2

Chiew SP; Lie ST; Lee CK; Huang ZW, 2004, 'Fatigue performance of cracked tubular T joints under combined loads. I: Experimental', Journal of Structural Engineering, vol. 130, pp. 562 - 571, http://dx.doi.org/10.1061/(ASCE)0733-9445(2004)130:4(562)

Lie ST; Chiew SP; Lee CK; Huang ZW, 2004, 'Fatigue performance of cracked tubular T joints under combined loads. II: Numerical', Journal of Structural Engineering, vol. 130, pp. 572 - 581, http://dx.doi.org/10.1061/(ASCE)0733-9445(2004)130:4(572)

Lee CK; Liu X; Fan SC, 2003, 'Local multiquadric approximation for solving boundary value problems', Computational Mechanics, vol. 30, pp. 396 - 409, http://dx.doi.org/10.1007/s00466-003-0416-5

Lee CK, 2003, 'Automatic metric 3D surface mesh generation using subdivision surface geometrical model. Part 2: Mesh generation algorithm and examples', International Journal for Numerical Methods in Engineering, vol. 56, pp. 1615 - 1646, http://dx.doi.org/10.1002/nme.631

Lee CK; Liu X; Fan SC, 2003, 'On solving singular interface problems using the enriched partition-of-unity finite element methods', Engineering Computations (Swansea, Wales), vol. 20, pp. 998 - 1022

Lee CK, 2003, 'Automatic metric 3D surface mesh generation using subdivision surface geometrical model. Part 1: Construction of underlying geometrical model', International Journal for Numerical Methods in Engineering, vol. 56, pp. 1593 - 1614, http://dx.doi.org/10.1002/nme.630

Lee YK; Lee CK, 2003, 'A new indirect anisotropic quadrilateral mesh generation scheme with enchanced local mesh smoothing procedures', International Journal for Numerical Methods in Engineering, vol. 58, pp. 277 - 300, http://dx.doi.org/10.1002/nme.771

Lie ST; Lee CK; Wong SM, 2003, 'Model and mesh generation of cracked tubular Y-joints', Engineering Fracture Mechanics, vol. 70, pp. 161 - 184, http://dx.doi.org/10.1016/S0013-7944(02)00036-X

Liu X; Lee CK; Fan SC, 2002, 'On using enriched cover function in the partition-of-unity method for singular boundary-value problems', Computational Mechanics, vol. 29, pp. 212 - 225, http://dx.doi.org/10.1007/s00466-002-0335-x

Lee YK; Lee CK, 2002, 'Automatic generation of anisotropic quadrilateral meshes on three-dimensional surfaces using metric specifications', International Journal for Numerical Methods in Engineering, vol. 53, pp. 2673 - 2700, http://dx.doi.org/10.1002/nme.408

Chiew SP; Lie ST; Lee CK; Huang ZW, 2001, 'Stress intensity factors for a surface crack in a tubular T-joint', International Journal of Pressure Vessels and Piping, vol. 78, pp. 677 - 685, http://dx.doi.org/10.1016/S0308-0161(01)00083-7

Lee CK; Wong SM; Lie ST, 2001, 'On increasing the order and density of 3D finite element meshes', Communications in Numerical Methods in Engineering, vol. 17, pp. 55 - 68, http://dx.doi.org/10.1002/1099-0887(200101)17:1<55::AID-CNM389>3.0.CO;2-O

Lie ST; Lee CK; Wong SM, 2001, 'Modelling and mesh generation of weld profile in tubular Y-joint', Journal of Constructional Steel Research, vol. 57, pp. 547 - 567, http://dx.doi.org/10.1016/S0143-974X(00)00031-6

Lee CK, 2001, 'On curvature element-size control in metric surface mesh generation', International Journal for Numerical Methods in Engineering, vol. 50, pp. 787 - 807, http://dx.doi.org/10.1002/1097-0207(20010210)50:4<787::AID-NME51>3.0.CO;2-O

Lee CK, 2000, 'Automatic metric advancing front triangulation over curved surfaces', Engineering Computations (Swansea, Wales), vol. 17, pp. 48 - 74, http://dx.doi.org/10.1108/02644400010308080

Lee CK, 2000, 'A new finite point generation scheme using metric specifications', International Journal for Numerical Methods in Engineering, vol. 48, pp. 1423 - 1444, http://dx.doi.org/10.1002/1097-0207(20000810)48:10<1423::AID-NME948>3.0.CO;2-T

Lee CK; Wu GJ, 2000, 'Shear lag analysis by the adaptive finite element method - 1. Analysis of simple plated structures', Thin-Walled Structures, vol. 38, pp. 285 - 309, http://dx.doi.org/10.1016/S0263-8231(00)00043-4

Lee CK; Wu GJ, 2000, 'Shear lag analysis by the adaptive finite element method - 2. Analysis of complex plated structures', Thin-Walled Structures, vol. 38, pp. 311 - 336, http://dx.doi.org/10.1016/S0263-8231(00)00044-6

Lee CK; Sze KY; Lo SH, 1999, 'On using degenerated solid shell elements in adaptive refinement analysis', International Journal for Numerical Methods in Engineering, vol. 45, pp. 627 - 659, http://dx.doi.org/10.1002/(SICI)1097-0207(19990630)45:6<627::AID-NME602>3.0.CO;2-Q

Lee CK; Lo SH, 1999, 'A full 3D finite element analysis using adaptive refinement and PCG solver with back interpolation', Computer Methods in Applied Mechanics and Engineering, vol. 170, pp. 39 - 64, http://dx.doi.org/10.1016/S0045-7825(98)00188-1

Lee CK, 1999, 'Automatic adaptive mesh generation using metric advancing front approach', Engineering Computations (Swansea, Wales), vol. 16, pp. 230 - 263, http://dx.doi.org/10.1108/02644409910257494

Lee CK; Hobbs RE, 1999, 'Automatic adaptive finite element mesh generation over arbitrary two-dimensional domain using advancing front technique', Computers and Structures, vol. 71, pp. 9 - 34, http://dx.doi.org/10.1016/S0045-7949(98)00215-6

Lo SH; Lee CK, 1998, 'On constructing accurate recovered stress fields for the finite element solution of Reissner-Mindlin plate bending problems', Computer Methods in Applied Mechanics and Engineering, vol. 160, pp. 175 - 191, http://dx.doi.org/10.1016/S0045-7825(97)00292-2

Lo SH; Lee CK, 1998, 'Selective regional refinement procedure for adaptive finite element analysis', Computers and Structures, vol. 68, pp. 325 - 341, http://dx.doi.org/10.1016/S0045-7949(98)00086-8

Lee CK; Hobbs RE, 1998, 'On solving nearly incompressible 2D problems using an adaptive refinement procedure', Communications in Numerical Methods in Engineering, vol. 14, pp. 409 - 418, http://dx.doi.org/10.1002/(SICI)1099-0887(199805)14:5<409::AID-CNM152>3.0.CO;2-U

Wong SC; Lee CK; Tong CO, 1998, 'Finite element solution for the continuum traffic equilibrium problems', International Journal for Numerical Methods in Engineering, vol. 43, pp. 1253 - 1273, http://dx.doi.org/10.1002/(SICI)1097-0207(19981215)43:7<1253::AID-NME468>3.0.CO;2-B

Lo SH; Lee CK, 1998, 'On using different recovery procedures for the construction of smoothed stress in finite element method', International Journal for Numerical Methods in Engineering, vol. 43, pp. 1223 - 1252, http://dx.doi.org/10.1002/(SICI)1097-0207(19981215)43:7<1223::AID-NME466>3.0.CO;2-K

Lee CK; Hobbs RE, 1998, 'Automatic adaptive finite element mesh generation over rational B-spline surfaces', Computers and Structures, vol. 69, pp. 577 - 608, http://dx.doi.org/10.1016/S0045-7949(98)80096-5

Lee CK; Hobbs RE, 1998, 'Closed form stiffness matrix solutions for some commonly used hybrid finite elements', Computers and Structures, vol. 67, pp. 463 - 482, http://dx.doi.org/10.1016/S0045-7949(98)00055-8

Lee CK; Hobbs RE, 1998, 'Automatic adaptive refinement for plate bending problems using Reissner-Mindlin plate bending elements', International Journal for Numerical Methods in Engineering, vol. 41, pp. 1 - 63, http://dx.doi.org/10.1002/(SICI)1097-0207(19980115)41:1<1::AID-NME264>3.0.CO;2-O

Lee CK; Lo SH, 1997, 'Automatic adaptive 3-D finite element refinement using different-order tetrahedral elements', International Journal for Numerical Methods in Engineering, vol. 40, pp. 2195 - 2226, http://dx.doi.org/10.1002/(SICI)1097-0207(19970630)40:12<2195::AID-NME153>3.0.CO;2-3

Lee CK; Lo SH, 1997, 'Automatic adaptive refinement finite element procedure for 3D stress analysis', Finite Elements in Analysis and Design, vol. 25, pp. 135 - 166

Lau TS; Lo SH; Lee CK, 1997, 'Generation of quadrilateral mesh over analytical curved surfaces', Finite Elements in Analysis and Design, vol. 27, pp. 251 - 272, http://dx.doi.org/10.1016/S0168-874X(97)00015-2

Lee CK; Hobbs RE, 1997, 'On using different finite elements with an automatic adaptive refinement procedure for the solution of 2-D stress analysis problems', International Journal for Numerical Methods in Engineering, vol. 40, pp. 4547 - 4576, http://dx.doi.org/10.1002/(SICI)1097-0207(19971230)40:24<4547::AID-NME272>3.0.CO;2-J

Lee CK; Hobbs RE, 1997, 'Automatic adaptive refinement for shell analysis using nine-node assumed strain element', International Journal for Numerical Methods in Engineering, vol. 40, pp. 3601 - 3638, http://dx.doi.org/10.1002/(SICI)1097-0207(19971015)40:19<3601::AID-NME230>3.0.CO;2-D

Lee CK; Lo SH, 1995, 'An automatic adaptive refinement procedure using triangular and quadrilateral meshes', Engineering Fracture Mechanics, vol. 50, pp. 671 - 686, http://dx.doi.org/10.1016/0013-7944(94)E0053-J

Lo SH; Lee CK, 1994, 'Generation of gradation meshes by the background grid technique', Computers and Structures, vol. 50, pp. 21 - 32, http://dx.doi.org/10.1016/0045-7949(94)90434-0

Lee CK; Lo SH, 1994, 'A new scheme for the generation of a graded quadrilateral mesh', Computers and Structures, vol. 52, pp. 847 - 857, http://dx.doi.org/10.1016/0045-7949(94)90070-1

Lo SH; Lee CK, 1992, 'On using meshes of mixed element types in adaptive finite element analysis', Finite Elements in Analysis and Design, vol. 11, pp. 307 - 336, http://dx.doi.org/10.1016/0168-874X(92)90012-2

Lo SH; Lee CK, 1992, 'Solving crack problems by an adaptive refinement procedure', Engineering Fracture Mechanics, vol. 43, pp. 147 - 163, http://dx.doi.org/10.1016/0013-7944(92)90118-X

LEE CK; LO SH, 1992, 'AN AUTOMATIC ADAPTIVE REFINEMENT FINITE-ELEMENT PROCEDURE FOR 2D ELASTOSTATIC ANALYSIS', INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, vol. 35, pp. 1967 - 1989, http://dx.doi.org/10.1002/nme.1620351004

Conference Papers

Meng D; Lee CK; Zhang YX, 2018, 'Flexural behaviour of reinforced polyvinyl alcohol-engineered cementitious composite beams', in RILEM Bookseries, pp. 441 - 447, presented at , http://dx.doi.org/10.1007/978-94-024-1194-2_51

Del Linz P; Rana MM; Khan A; Fung TC; Lee CK, 2018, 'Dynamic and Quasi Static Modelling of a Sandwich Structure Lodaded With a Cased Charge', in , 7th International Conference on Protection of Structures against Hazards, Hanoi, Vietnam, presented at 7th International Conference on Protection of Structures against Hazards, Hanoi, Vietnam, 30 - 31 October 2018

Jin YF; Chiew SP; Lee CK, 2018, 'Residual stress distribution in cold-rolled curved steel rectangular hollow sections', in Tubular Structures XVI - Proceedings of the 16th International Symposium on Tubular Structures, ISTS 2017, pp. 575 - 582, presented at , http://dx.doi.org/10.1201/9781351210843-72

Jiang J; Lee CK; Chiew SP, 2018, 'Experimental study for the effect of fabrication process on strength of high strength steel box column', in Tubular Structures XVI - Proceedings of the 16th International Symposium on Tubular Structures, ISTS 2017, pp. 531 - 538, presented at , http://dx.doi.org/10.1201/9781351210843-67

Lim NS; Tan KH; Lee CK, 2017, 'Effect of reinforcement detailing on catenary action in 2-D RC frame', in High Tech Concrete: Where Technology and Engineering Meet - Proceedings of the 2017 fib Symposium, pp. 1740 - 1749, presented at , http://dx.doi.org/10.1007/978-3-319-59471-2_200

Lim NS; Tan KH; Lee CK, 2017, 'Reinforced concrete beam-slabs with removed corner column under point and uniform distributed load', in High Tech Concrete: Where Technology and Engineering Meet - Proceedings of the 2017 fib Symposium, pp. 1750 - 1759, presented at , http://dx.doi.org/10.1007/978-3-319-59471-2_201

Slay PGR; Abbasi A; Imran A; Lee CK, 2017, 'Failure of public sector programs; A Framework to manage success criteria', in , Project and Program Management Symposium 2017, UNSW Canberra at the Australian Defence Force Academy, presented at Project and Program Management Symposium 2017, UNSW Canberra at the Australian Defence Force Academy, 02 - 04 May 2017, http://www.pgcs.org.au/library/2017-archive/

Chen C; Zhao MS; Fung TC; Chiew SP; Lee CK, 2017, 'Influence of welding on mechanical properties of high strength steel butt joints', in ce/papers. Special Issue: Proceedings of Eurosteel 2017, Wiley (Ernst & Sohn), Copenhagen, Denmark, pp. 3567 - 3576, presented at The Eurosteel 2017 Conference, Copenhagen, Denmark, 13 - 15 September 2017, http://dx.doi.org/10.1002/cepa.412

Rana MM; Lee CK; Al-Deen S, 2017, 'A study on the bond stress-slip behavior between engineered cementitious composites and structural steel sections', in , The Eurosteel 2017 Conference, Copenhagen, Denmark, presented at The Eurosteel 2017 Conference, Copenhagen, Denmark, 13 - 15 September 2017

Meng D; Lee CK; Zhang YX, 2017, 'Mechanical behavior of a new polyvinyl alcohol fiber reinforced engineered cementitious composite (PVA-ECC) using local ingredients', in Mechanics of Structures and Materials: Advancements and Challenges - Proceedings of the 24th Australasian Conference on the Mechanics of Structures and Materials, ACMSM24 2016, pp. 471 - 476, presented at

Khan A; Rana MM; Linz PD; Lee C; Fung TC, (eds.), 2017, 'Effect of cased charges on plain steel and steel-concrete composite targets', in Proceedings of the 6th International Conference on Design and Analysis of Protective Structures (DAPS2017), The 6th International Conference on Design and Analysis of Protective Structures (DAPS2017), Melbourne, Australia, pp. 283 - 291, presented at The 6th International Conference on Design and Analysis of Protective Structures (DAPS2017), Melbourne, Australia, 29 November - 01 December 2017

Linz PD; Fung TC; Lee C, (eds.), 2017, 'Modelling of the effect of cased charges on concrete walls', in Proceedings of the 6th International Conference on Design and Analysis of Protective Structures (DAPS 2017), The 6th International Conference on Design and Analysis of Protective Structures (DAPS 2017), Melbourne, Australia, pp. 390 - 400, presented at The 6th International Conference on Design and Analysis of Protective Structures (DAPS 2017), Melbourne, Australia, 29 November - 01 December 2017

Yu QJ; Lee C; Fung TC, (eds.), 2017, 'A practical algorithm (fast running tool) based on simplified numerical simulation for debris prediction of real-size Earth-Covered-Magazine (ECM) under internal detonation', in Proceedings of the 6th International Conference on Design and Analysis of Protective Structures (DAPS 2017), The 6th International Conference on Design and Analysis of Protective Structures (DAPS 2017), Melbourne, Australia, pp. 707 - 719, presented at The 6th International Conference on Design and Analysis of Protective Structures (DAPS 2017), Melbourne, Australia, 29 November - 01 December 2017

Meng D; Lee CK; Zhang YX, 2017, 'An experimental study on the flexural behaviour of reinforced polyvinyl alcohol-engineered cementitious composite beams', in 9th Australasian Congress on Applied Mechanics, ACAM 2017, presented at

Meng D; Zhang YX; Lee CK, 2017, 'Numerical study on flexural behaviour of steel reinforced polyvinyl alcohol-engineered cementitious composite beams', in 9th Australasian Congress on Applied Mechanics, ACAM 2017, presented at

Jiang J; Lee CK; Chiew SP, 2016, 'Modelling for the effect of welding process on buckling of built-up high strength steel box column', in Recent Progress in Steel and Composite Structures - Proceedings of the 13th International Conference on Metal Structures, ICMS 2016, pp. 337 - 344, presented at

Zhang XZ; Zhao MS; Chiew SP; Lee CK; Fung TC, 2016, 'Influence of welding on the strength of high performance steels', in , Australian Structural Engineering Conference 2016, Brisbane Australia, presented at Australian Structural Engineering Conference 2016, Brisbane Australia, 23 - 25 November 2016

Jiang J; Lee CK; Chiew SP; Tiong PLY, 2016, 'Modelling for welding residual stress of high strength steel box column with SYSWELD', in , Australian Structural Engineering Conference 2016, Brisbane Australia, presented at Australian Structural Engineering Conference 2016, Brisbane Australia, 23 - 25 November 2016

Jin FY; Chiew SP; Lee CK, 2016, 'Analytical models for sectional distortion of roller-bent curved steel rectangular hollow sections', in , Australian Structural Engineering Conference 2016, Brisbane Australia, presented at Australian Structural Engineering Conference 2016, Brisbane Australia, 23 - 25 November 2016

Chiew SP; Cheng KW; Lee CK, 2015, 'Behaviour of bridging mega-truss tubular structures fabricated from S690 steel plates: Part I – Structural aspects', in Tubular Structures - Proceedings of the 15th International Symposium on Tubular Structures, ISTS 2015, pp. 303 - 309, presented at

Cheng KW; Chiew SP; Lee CK, 2015, 'Behaviour of bridging mega-truss tubular structures fabricated from S690 steel plates: Part II – Material aspects', in Tubular Structures - Proceedings of the 15th International Symposium on Tubular Structures, ISTS 2015, pp. 311 - 317, presented at

Zhang Y; Lin X; Lee CK, 2015, 'Finite element analysis of FRP-strengthened reinforced concrete panels under blast loading', in Design and Analysis of Protective Structures, The 5th International Conference on Design and Analysis of Protective Structures, Singapore, presented at The 5th International Conference on Design and Analysis of Protective Structures, Singapore, 19 - 21 May 2015

Namyo SL; Weng J; Lee CK; Tan KH, 2015, 'Numerical study on 2-D RC frame with middle column removed under progressive collapse', in , The Fib (Fédération internationale du béton / International Federation for Structural Concrete) Symposium, Copenhagen, Denmark, presented at The Fib (Fédération internationale du béton / International Federation for Structural Concrete) Symposium, Copenhagen, Denmark, 18 - 20 May 2015

Namyo SL; Lee CK; Tan KH, 2015, 'Experimental study on 2-D RC frame with middle column removed under progressive collapse', in , The Fib (Fédération internationale du béton / International Federation for Structural Concrete) Symposium, Copenhagen, Denmark, presented at The Fib (Fédération internationale du béton / International Federation for Structural Concrete) Symposium, Copenhagen, Denmark, 18 - 20 May 2015

Namyo SL; Lee CK; Tan KH, 2015, 'Effect of Torsion on 2-D RC Frame under Middle Column Removal in Progressive Collapse', in , The 5th International Conference on Design and analysis of Protective Structures (DAPS2015), Singapore, presented at The 5th International Conference on Design and analysis of Protective Structures (DAPS2015), Singapore, 19 - 21 May 2015

Weng J; Lee CK; Tan KH, 2015, 'Damage assessment of reinforced concrete frames under progressive collapse', in , The 5th International Conference on Design and analysis of Protective Structures (DAPS2015), Singapore, presented at The 5th International Conference on Design and analysis of Protective Structures (DAPS2015), Singapore, 19 - 21 May 2015

Long X; Lee CK; Tan KH, 2015, 'Extended beam element formulation based on static condensation to simulate rotational discontinuity', in , The 5th International Conference on Design and analysis of Protective Structures (DAPS2015), Singapore, presented at The 5th International Conference on Design and analysis of Protective Structures (DAPS2015), Singapore, 19 - 21 May 2015

Linz PD; Fan SC; Lee CK, 2015, 'Modelling of combined impact and blast loading on reinforced concrete slabs', in , The 8th International Conference on Advanced Computational Engineering and Experimenting (ACEX2015), Munich, Germany, presented at The 8th International Conference on Advanced Computational Engineering and Experimenting (ACEX2015), Munich, Germany, 29 June - 02 July 2015

Jin YF; Chiew SP; Lee CK, 2015, 'Finite element simulation of residual stress in roller bending hollow section steel members', in , The 2015 World Congress on Advances in Civil, Environmental, and Materials Research (ACEM15), Incheon, Korea, presented at The 2015 World Congress on Advances in Civil, Environmental, and Materials Research (ACEM15), Incheon, Korea, 25 - 29 August 2015

Fan SC; Yu QJ; Lee CK, 2015, 'Effect of earth cover to the breakup of magazine subjected to accidental explosion', in , The 8th International Conference of Croatian Society of Mechanics, Opatija, Croatia, presented at The 8th International Conference of Croatian Society of Mechanics, Opatija, Croatia, 29 September - 02 October 2015

Weng J; Tan KH; Lee CK, 2015, 'On nonlinear progressive collapse analysis using superelement with large rotation correction', in , The 2nd Australasian Conference on Computational Mechanics (ACCM2015), Brisbane, Australia, presented at The 2nd Australasian Conference on Computational Mechanics (ACCM2015), Brisbane, Australia, 30 November - 01 December 2015

Zhao MS; Jin YF; Lee CK; Chiew SP, 2014, 'Post-weld heat treatment of high strength s690 steel plate-to-plate joints - Part II: Ultimate strength', in Proceedings of the 12th International Conference on Steel, Space and Composite Structures, pp. 397 - 402, presented at

Jin YF; Zhao MS; Lee CK; Chiew SP, 2014, 'Post-weld heat treatment of high strength s690 steel plate-to-plate joints-Part I: Influence of heat treatment', in Proceedings of the 12th International Conference on Steel, Space and Composite Structures, pp. 251 - 258, presented at

Chiew SP; Lee CK; Zhao MS; Jin YF; Cai YQ; Chen C, 2014, 'Intensification of low density development - Functional bridging buildings', in Proceedings of the 12th International Conference on Steel, Space and Composite Structures, pp. 47 - 59, presented at

Long X; Tan KH; Lee CK, 2014, 'Finite Element Simulations of Progressive Collapse in FENFAM3D', in , The 1st AUN/SEED-Net Regional Conference on Natural Disaster, Yogyakarta, Indonesia, presented at The 1st AUN/SEED-Net Regional Conference on Natural Disaster, Yogyakarta, Indonesia, 23 - 24 January 2014

Long X; Tan KH; Lee CK, 2014, 'Finite element formulation of three dimensional reinforced column joint', in , The 1st AUN/SEED-Net Regional Conference on Natural Disaster, Yogyakarta, Indonesia, presented at The 1st AUN/SEED-Net Regional Conference on Natural Disaster, Yogyakarta, Indonesia, 22 - 23 January 2014

Chiew SP; Lee CK; Zhao MS, 2014, 'Fatigue Behavior of Rectangular Hollow Section T-Joints Fabricated from High Strength Steel Plates', in , The 11th International Fatigue Congress, Melbourne Cricket Ground, Melbourne, Australia, presented at The 11th International Fatigue Congress, Melbourne Cricket Ground, Melbourne, Australia, 02 - 07 March 2014

Zhao MS; Chiew SP; Lee CK, 2013, 'Fatigue behavior of rectangular built-up hollow section joint made of high strength steel s690', in Proceedings of the 13th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC 2013, presented at

Long X; Tan KH; Lee CK, 2013, 'Analytical model on the bond stress-slip relationship between steel reinforcement and concrete for RC beam-column joints', in Applied Mechanics and Materials, pp. 1212 - 1218, presented at , http://dx.doi.org/10.4028/www.scientific.net/AMM.275-277.1212

Fan SC; Yu JQ; Lee CK, 2013, 'Simulation of Fracture/breakup of Concrete Magazine using Cohesive Element', in , The 7th International Conference on Advanced Computational Engineering and Experimenting (ACEX2013), Madrid, Spain, presented at The 7th International Conference on Advanced Computational Engineering and Experimenting (ACEX2013), Madrid, Spain, 01 - 04 July 2013

Xu J; Lee CK; Fan SC, 2013, 'Numerical modeling on concrete debris ricocheting off sand ground', in , The 5th Asia Pacific Congress On Computational Mechanics (APCOM) & 4th International Symposium On Computational Mechanics (ISCM), Singapore, presented at The 5th Asia Pacific Congress On Computational Mechanics (APCOM) & 4th International Symposium On Computational Mechanics (ISCM), Singapore, 11 - 13 December 2013

Lee CK; Xu J; Fan SC, 2013, 'A study on the cloud effect on debris trajectory', in , The 5th Asia Pacific Congress On Computational Mechanics (APCOM) and 4th International Symposium On Computational Mechanics (ISCM), Singapore, presented at The 5th Asia Pacific Congress On Computational Mechanics (APCOM) and 4th International Symposium On Computational Mechanics (ISCM), Singapore, 11 - 14 December 2013

Zhao MS; Jin YF; Lee CK; Chiew SP, 2012, 'Influence of welding on high strength steel plate-toplate Y-joints part II: Simulation of heat affected zone', in 11th International Conference on Steel Space and Composite Structures, pp. 311 - 315, presented at

Jin YF; Zhao MS; Lee CK; Chiew SP, 2012, 'Influence of welding on high strength steel plate-toplate Y-Joints part I: Simulation of residual stress', in 11th International Conference on Steel Space and Composite Structures, pp. 243 - 248, presented at

Chiew SP; Jiang J; Lee CK, 2012, 'Residual stress investigation of welded high strength steel box T-joints', in Tubular Structures XIV - Proceedings of the 14th International Symposium on Tubular Structures, ISTS 2012, pp. 141 - 147, presented at

Fan SC; Li Y; Lee CK, 2012, 'Numerical simulation of blast debris ricocheting off sandy ground surface', in , The 4th International Conference on Design and Analysis of Protective Structures (DAPS2012), Jeju, Korea, presented at The 4th International Conference on Design and Analysis of Protective Structures (DAPS2012), Jeju, Korea, 19 - 22 June 2012

Long X; Bao JQ; Tan KH; Lee CK, 2012, 'Parametric study on RC beam-column subassemblages under column-removal scenarios by fibre beam elements in FEMFAN3D', in , The 4th International Conference on Design and Analysis of Protective Structures (DAPS2012), Jeju, Korea, presented at The 4th International Conference on Design and Analysis of Protective Structures (DAPS2012), Jeju, Korea, 19 - 22 June 2012

Long X; Tan KH; Lee CK, 2012, 'A 3D co-rotational beam element with geometric and material nonlinearities for steel and RC framed structures', in , The 4th International Conference on Design and Analysis of Protective Structures (DAPS2012), Jeju, Korea, presented at The 4th International Conference on Design and Analysis of Protective Structures (DAPS2012), Jeju, Korea, 19 - 22 June 2012

Fan SC; Yu QJ; Lee CK, 2012, 'Plenary speech: Challenges in simulation of break-up of concrete magazine and the debris throw', in , The 4th International Conference on Computational Methods (ICCM2012), Crowne Plaze, Gold Coast, Australia, presented at The 4th International Conference on Computational Methods (ICCM2012), Crowne Plaze, Gold Coast, Australia, 25 - 28 November 2012

Chiew SP; Jiang J; Lee CK; Yu Y, 2011, 'Effect of residual stress on stress concentration of high strength steel plate-to-plate joints', in 10th International Conference on Steel Space and Composite Structures, pp. 127 - 135, presented at

Chiew SP; Jiang J; Lee CK, 2011, 'Influence of Residual Stress on Stress Concentration of High Strength Steel Plate-to-Plate Joints', in , The Professor LEE SENG LIP Symposium: A tribute to his contributions in Civil Engineering -Research, Education and Practice, Singapore, pp. 189 - 198, presented at The Professor LEE SENG LIP Symposium: A tribute to his contributions in Civil Engineering -Research, Education and Practice, Singapore, 21 - 22 March 2011

Jinag J; Lee CK; Chiew SP, 2011, 'Residual Stress Distributions of High Strength Steel Plate-to-Plate T and Y Joints', in , The 7th International Conference on Steel & Aluminium Structures, Kuching, Sarawak, Malaysia, presented at The 7th International Conference on Steel & Aluminium Structures, Kuching, Sarawak, Malaysia, 13 - 15 July 2011

Jiang J; Lee CK; Chiew SP; Zhao MS, 2011, 'Numerical modeling of residual stress distributions in high strength steel plate-to-plate T and Y joint', in , The 7th International Conference on Steel & Aluminium Structures, Kuching, Sarawak, Malaysia, presented at The 7th International Conference on Steel & Aluminium Structures, Kuching, Sarawak, Malaysia, 13 - 15 July 2011

Chiew SP; Yu Y; Lee CK; Jiang J, 2011, 'Ultimate strength of high strength steel welded plate-to-plate joints', in , The 7th International Conference on Steel & Aluminium Structures, Kuching, Sarawak, Malaysia, presented at The 7th International Conference on Steel & Aluminium Structures, Kuching, Sarawak, Malaysia, 13 - 15 July 2011

Xu J; Tan KH; Li ZX; Lee CK, 2010, 'A Co-rotation shell element with material nonlinearities', in Civil-Comp Proceedings, presented at

Chiew SP; Lee CK; Lie ST; Nguyen TBN, 2009, 'Fatigue study of partially overlapped circular hollow section k-joints', in ICASS '09/IJSSD - Proceedings of Sixth International Conference on Advances in Steel Structures and Progress in Structural Stability and Dynamics, pp. 602 - 611, presented at

Chiew SP; Lee CK; Lie ST; Nguyen TBN, 2008, 'Fatigue modeling for partially overlapped CHS K-joints with surface crack', in , The 12th International Symposium on Tubular Structures (ISTS 12), Shanghai, China, pp. 119 - 126, presented at The 12th International Symposium on Tubular Structures (ISTS 12), Shanghai, China, 08 - 10 October 2008

Lee CK; Chiew SP; Lie ST; Nguyen TBN, 2008, 'Hierarchical modelling tools for fatigue analysis of partially overlapped circular hollow section k-joints', in , The 2nd International Symposium on Advances in Steel and Composite Structures, Singapore, pp. 132 - 152, presented at The 2nd International Symposium on Advances in Steel and Composite Structures, Singapore, 01 - 01 August 2008

Lee CK; Lie ST; Chiew SP; Sopha T; Nguyen TBN, 2007, 'Experimental studies on stress distributions for partially overlapped CHS K-joints', in Proceedings of the 9th International Conference on Steel, Space and Composite Structures, pp. 389 - 394, presented at

Lee CK; Chiew SP; Lie ST; Sopha T; Nguyen TBN, 2007, 'Experimental studies on stress concentration factors for partially overlapped Circular Hollow Section K-joints', in 5th International Conference on Advances in Steel Structures, ICASS 2007, pp. 986 - 991, presented at

Chiew SP; Lee CK; Lie ST; Nguyen TBN; Sopha T, 2007, 'Fatigue behaviour of partially overlapped CHS K-joints', in Proceedings of 8th Pacific Structural Steel Conference - Steel Structures in Natural Hazards, PSSC 2007, pp. 145 - 152, presented at

Lee CK; Chiew SP; Lie ST; Sopha T; Nguyen TBN, 2007, 'Experimental studies on fatigue behavior of Partially Overlapped Circular Hollow Section K-joints', in , The 2nd International Maritime-Port Technology and Development Conference (MTEC 2007), Singapore, presented at The 2nd International Maritime-Port Technology and Development Conference (MTEC 2007), Singapore, 26 - 28 September 2007

Chiew SP; Lee CK; Lie ST; Nguyen TBN; Sopha T, 2007, 'Mesh Generation for Partially Overlapped Circular Hollow Section K-Joints under Fatigue Loadings', in , The 2nd International Maritime-Port Technology and Development Conference (MTEC 2007), Singapore, presented at The 2nd International Maritime-Port Technology and Development Conference (MTEC 2007), Singapore, 26 - 28 September 2007

Lee CK; Lie ST; Chiew SP, 2007, 'Finite element modellings of tubular joints for fatigue assessment', in , International Symposium on Fatigue and Fracture of Steel Structures, Singapore, presented at International Symposium on Fatigue and Fracture of Steel Structures, Singapore, 04 - 04 December 2007

Chiew SP; Lie ST; Lee CK; Ji HL, 2006, 'Crack surface under weld toe in square hollow section T-joints', in Tubular Structures XI - Proceedings of the 11th International Symposium and IIW International Conference on Tubular Structures, pp. 621 - 628, presented at

Chiew SP; Lee CK; Lie ST; Nguyen NTB, 2006, 'Geometrical Modeling of overlap K-joints', in , The 8th International Conference on Steel Space Composite Structures, Kuala Lumpur, Malaysia, pp. 425 - 434, presented at The 8th International Conference on Steel Space Composite Structures, Kuala Lumpur, Malaysia, 15 - 17 May 2006

Lee CK; Lie ST; Chiew SP; Sopha T; Nguyen TBN, 2006, 'An experimental study on the fatigue behaviour of partially overlapped CHS K-Joints', in , The 8th International Conference on Steel Space Composite Structures, Kuala Lumpur, Malaysia, pp. 273 - 279, presented at The 8th International Conference on Steel Space Composite Structures, Kuala Lumpur, Malaysia, 15 - 17 May 2006

Lie ST; Lee CK; Chiew SP; Yang ZM, (eds.), 2006, 'Numerical models in linear and non-linear Fe analysis of cracked rectangular hollow section joints', in COMPUTATIONAL METHODS, PTS 1 AND 2, SPRINGER, Singapore, SINGAPORE, pp. 671 - +, presented at 1st International Conference on Computational Methods (ICCM04), Singapore, SINGAPORE, 15 - 17 December 2004

Chiew SP; Lie ST; Lee CK; Yu Y, 2005, 'Debonding Failure Model for FRP Retrofitted Steel Beams', in , The 4th International Conference on Advances in Steel Structures, Shanghai, China, presented at The 4th International Conference on Advances in Steel Structures, Shanghai, China, 13 - 15 June 2005

Chiew SP; Lee CK; Lie ST; Ji HL, 2005, 'Numerical Modelling of Square Tubular T-Joints with a Surface Crack at Corner', in , The 4th International Conference on Advances in Steel Structures (ICASS 2005), Shanghai, China, presented at The 4th International Conference on Advances in Steel Structures (ICASS 2005), Shanghai, China, 13 - 15 June 2005

Lie ST; Chiew SP; Lee CK; Yang ZM, 2005, 'The Ultimate Behaviour of Cracked Square Hollow Section T-joints', in , The 4th International Conference on Advances in Steel Structures (ICASS 2005), Shanghai China, presented at The 4th International Conference on Advances in Steel Structures (ICASS 2005), Shanghai China, 13 - 15 June 2005

Chiew SP; Lie ST; Lee CK; Ji HL, 2005, 'Large-scale fatigue tests on square tubular T-joints', in International Conference on Advances in Experimental Structural Engineering, pp. 557 - 564, presented at

Lie ST; Lee CK; Chiew SP; Shao YB, 2004, 'Validation of Stress Intensity Factors of a Surface Crack in Tubular K-joints', in , The 18th Australian Conference on the Mechanics of Structures and Materials, Perth, Australia, presented at The 18th Australian Conference on the Mechanics of Structures and Materials, Perth, Australia, 01 - 03 December 2004

Chiew SP; Lie ST; Lee CK; Huang ZW, 2003, 'Parametric Equations for Stress Intensity Factors of Cracked Tubular T&Y-Joints', in Proceedings of the International Offshore and Polar Engineering Conference, pp. 2505 - 2512, presented at

Lie ST; Chiew SP; Lee CK; Shao YB, 2003, 'Estimation of Stress Intensity Factors of Weld Toe Surface Cracks in Tubular K-Joints', in , The 10th International Symposium on Tubular Structures, Madrid, Spain, pp. 347 - 355, presented at The 10th International Symposium on Tubular Structures, Madrid, Spain, 18 - 20 September 2003

Chiew SP; Lie ST; Lee CK; Ji HL, 2003, 'Fatigue Analysis of Square-to-Square Tubular T-Joint with Surface Crack', in , The 10th International Symposium on Tubular Structures, Madrid, Spain, pp. 375 - 382, presented at The 10th International Symposium on Tubular Structures, Madrid, Spain, 18 - 20 September 2003

Lo SH; Lee CK, 2003, 'Surface intersection by tracing of neighbours', in , International Conference on Adaptive Modeling and Simulation, Goteborg, Sweden, presented at International Conference on Adaptive Modeling and Simulation, Goteborg, Sweden, 29 September - 01 October 2003

Shuai YY; Lee CK, 2003, 'A new stress recovery and a posteriori error estimation scheme for RKPM', in , International Conference on Adaptive Modeling and Simulation, Goteborg, Sweden, presented at International Conference on Adaptive Modeling and Simulation, Goteborg, Sweden, 29 September - 01 October 2003

Xu QX; Lee CK, 2003, 'An automatic adaptive mesh generator for 3D thin-walled structures', in , International Conference on Adaptive Modeling and Simulation, Goteborg, Sweden, presented at International Conference on Adaptive Modeling and Simulation, Goteborg, Sweden, 29 September - 01 October 2003

Chiew SP; Lie ST; Lee CK; Huang ZW, (eds.), 2003, 'Parametric equations for stress intensity factors of cracked tubular T&Y-joints', in PROCEEDINGS OF THE THIRTEENTH (2003) INTERNATIONAL OFFSHORE AND POLAR ENGINEERING CONFERENCE, VOL 4, INTERNATIONAL SOCIETY OFFSHORE& POLAR ENGINEERS, HONOLULU, HI, pp. 255 - 262, presented at 13th International Offshore and Polar Engineering Conference (ISOPE-2003), HONOLULU, HI, 25 - 30 May 2003

Chiew SP; Lie ST; Ji HL; Lee CK, 2002, 'Stress analysis of square-to-square tubular T-joint under combined loads', in , The 7th International conference on steel and space structures, Singapore, pp. 199 - 206, presented at The 7th International conference on steel and space structures, Singapore, 02 - 03 October 2002

Lie ST; Chiew SP; Lee CK; Shao YB, 2002, 'Estimation of stress intensity factors of weld toe surface cracks in tubular K-joints', in , The 7th International conference on steel & space structures, Singapore, pp. 223 - 230, presented at The 7th International conference on steel & space structures, Singapore, 02 - 03 October 2002

Chiew SP; Lie ST; Lee CK; Huang ZW, 2001, 'Stress intensity factors of through-thickness and surface cracks in tubular Y-joints', in Proceedings of the International Offshore and Polar Engineering Conference, pp. 30 - 36, presented at

Lie ST; Chiew SP; Lee CK; Huang ZW, (eds.), 2001, 'Modelling through-thickness and surface cracks in tubular joints', in TUBULAR STRUCTURES IX, A A BALKEMA PUBLISHERS, DUSSELDORF, GERMANY, pp. 285 - 290, presented at 9th International Symposium on Tubular Structures, DUSSELDORF, GERMANY, 03 - 05 April 2001

Liu X; Fan SC; Lee CK, 2001, 'The Enriched Partition-of-Unity finite element methods for stress-intensity factors computations', in , The Eighth East Asia-Pacific Conference on Structural Engineering & Construction, Singapore, presented at The Eighth East Asia-Pacific Conference on Structural Engineering & Construction, Singapore, 05 - 07 December 2001

Lie ST; Chiew SP; Lee CK; Wong SM; Huang ZW, 2000, 'Modelling arbitrary through-thickness crack in a tubular T-joint', in Proceedings of the International Offshore and Polar Engineering Conference, pp. 53 - 58, presented at

Lee CK; Lie ST; Huang ZW; Wong SM, 2000, 'Finite Element Modelling of Tubular Y-joint', in , The 4th Asia-Pacific Structural Engineering and Construction Conference (APSEC 2000), Kuala Lumpur, Malaysoa, pp. 315 - 322, presented at The 4th Asia-Pacific Structural Engineering and Construction Conference (APSEC 2000), Kuala Lumpur, Malaysoa, 13 - 15 September 2000

Lee CK; Lie ST; Wong SM, 1999, 'Model and Mesh Generation of cracked tubular joints', in , The European Conference on Computational Mechanics, Munich, Germany, presented at The European Conference on Computational Mechanics, Munich, Germany, 31 August - 03 September 1999

Lo SH; Lee CK, (ed.), 1998, 'An optimal adaptive refinement strategy for full three dimensional finite element analysis', in , The Fourth International Conference on Computational Structures Technology, Edinburgh, Scotland, UK, pp. 109 - 113, presented at The Fourth International Conference on Computational Structures Technology, Edinburgh, Scotland, UK, 18 - 20 August 1998

Lo SH; Lee CK, 1998, 'Error Estimation of Degenerated Shell Elements', in , The Fourth International Conference on Computational Structures Technology, Edinburgh, Scotland, UK, pp. 95 - 99, presented at The Fourth International Conference on Computational Structures Technology, Edinburgh, Scotland, UK, 18 - 20 August 1998

Lo SH; Lee CK, 1998, 'On using selective refinement Scheme in Adaptive finite element analysis', in , The Fourth World Congress on Computational Mechanics, Buenos Aires, Argentina, presented at The Fourth World Congress on Computational Mechanics, Buenos Aires, Argentina, 29 June - 02 July 1998

Lee CK; Lo SH, 1998, 'On using different stress recovery procedures in Reissner-Mindlin finite element modelling', in , The Fourth World Congress on Computational Mechanics, Buenos Aires, Argentina, presented at The Fourth World Congress on Computational Mechanics, Buenos Aires, Argentina, 29 June - 02 July 1998

Lo SH; Lee CK, (eds.), 1998, 'On using special hybrid hexahedral element for the analysis of thin wall structures', in , The Fifth International Conference on Tall Buildings, Hong Kong, pp. 533 - 538, presented at The Fifth International Conference on Tall Buildings, Hong Kong, 09 - 11 December 1998

Sun SH; Wong SC; Lee CK; Tong CO, 1997, 'The Optimal Location of a facility in a continuum transportation network', in , The second conference of Hong Kong Society for transportation studies, Hong Kong, pp. 193 - 200, presented at The second conference of Hong Kong Society for transportation studies, Hong Kong, 06 - 06 December 1997

Lo SH; Lee CK, (eds.), 1996, 'Automatic adaptive refinement analysis in three dimensions', in , The Third Asian-Pacific Conference on Computational Mechanics, Seoul, Korea, pp. 2333 - 2338, presented at The Third Asian-Pacific Conference on Computational Mechanics, Seoul, Korea, 16 - 18 September 1996

LEE CK; LO SH, (eds.), 1993, 'ROBUST IMPLEMENTATION OF SUPERCONVERGENT PATCH RECOVERY TECHNIQUE', in COMPUTATIONAL MECHANICS : FROM CONCEPTS TO COMPUTATIONS, VOLS 1 AND 2, A A BALKEMA, SYDNEY, AUSTRALIA, pp. 1275 - 1280, presented at 2ND ASIAN / PACIFIC CONF ON COMPUTATIONAL MECHANICS, SYDNEY, AUSTRALIA, 03 - 06 August 1993

Lee CK; Lo SH, 1991, 'Using graded mesh generator in adaptive refinement procedure', in Computational Mechanics, pp. 1295 - 1301, presented at

Conference Presentations

Lee CK; Del Linz P; Rana MM; Khan A; Fung TC, 2018, 'Experimental and numerical studies of plain steel and steel-concrete sandwich panels under combined blast and fragment loadings', in , 10th Australian Network of Structural Health Monitoring (ANSHM) annual workshop, 2018, University of Wollongong, presented at 10th Australian Network of Structural Health Monitoring (ANSHM) annual workshop, 2018, University of Wollongong, 11 - 11 December 2018

Conference Abstracts

Linz PD; Fan SC; Lee CK, Modelling of residual capacity of slabs damaged by combined impact and blast loading

Fan SC; Yu QJ; Zhu ZK; Lee CK, A simulation strategy for prediction of debris due to internal explosion of an earth-covered magazine

Yu QJ; Fan SC; Lee CK, Strain-rate-dependent cohesive law in modelling breakup of earth covered magazine

Lim HS; Koh YH; Weerheijm J; van der Vorrt MM; Lee CK; Fan SC, Concrete debris breakup upon impact

Fan SC; Yu QJ; Lee CK, Debris-hazard-reducing hollow-core concrete arch structure subjected to accidental internal explosion

Lee YK; Lee CK, An Indirect mesh generator for anisotropic quadrilateral mesh on three dimensional surface using metric specifications