Journal articles

Chiew SP; Zhao MS; Lee CK, 2014, 'Mechanical properties of heat-treated high strength steel under fire/post-fire conditions', Journal of Constructional Steel Research, vol. 98, pp. 12 - 19, http://dx.doi.org/10.1016/j.jcsr.2014.02.003

Lee CK; Chiew SP; Jiang J, 2014, 'Residual stress of high strength steel box T-joints Part 2: Numerical study', Journal of Constructional Steel Research, vol. 98, pp. 73 - 87, http://dx.doi.org/10.1016/j.jcsr.2014.02.010

Fan SC; Yu QJ; Lee CK, 2014, 'Simulation of fracture/breakup of concrete magazine using cohesive element', Materialwissenschaft und Werkstofftechnik, vol. 45, pp. 385 - 396, http://dx.doi.org/10.1002/mawe.201400237

Long X; Tan KH; Lee CK, 2014, 'Bond stress-slip prediction under pullout and dowel action in reinforced concrete joints', ACI Structural Journal, vol. 111, pp. 977 - 987, http://dx.doi.org/10.14359/51686816

Long X; Tan KH; Lee CK, 2013, 'A 3D co-rotational beam element for steel and RC framed structures', Structural Engineering and Mechanics, vol. 48, pp. 587 - 613, http://dx.doi.org/10.12989/sem.2013.48.5.587

Long X; Yuan W; Tan KH; Lee CK, 2013, 'A superelement formulation for efficient structural analysis in progressive collapse', Structural Engineering and Mechanics, vol. 48, pp. 309 - 331, http://dx.doi.org/10.12989/sem.2013.48.3.309

Bao JQ; Long X; Tan KH; Lee CK, 2013, 'A new generalized Drucker-Prager flow rule for concrete under compression', Engineering Structures, vol. 56, pp. 2076 - 2082, http://dx.doi.org/10.1016/j.engstruct.2013.08.025

Xu J; Lee CK; Tan KH, 2013, 'An enriched 6-node MITC plate element for yield line analysis', Computers and Structures, vol. 128, pp. 64 - 76, http://dx.doi.org/10.1016/j.compstruc.2013.07.008

Lee CK; Chiew SP, 2013, 'An efficient modified flanges only method for plate girder bending resistance calculation', Journal of Constructional Steel Research, vol. 89, pp. 98 - 106, http://dx.doi.org/10.1016/j.jcsr.2013.06.012

Xu J; Lee CK; Tan KH, 2013, 'An XFEM frame for plate elements in yield line analyses', International Journal for Numerical Methods in Engineering, vol. 96, pp. 150 - 175, http://dx.doi.org/10.1002/nme.4535

Lee CK; Chiew SP; Jiang J, 2013, '3D residual stress modelling of welded high strength steel plate-to-plate joints', Journal of Constructional Steel Research, vol. 84, pp. 94 - 104, http://dx.doi.org/10.1016/j.jcsr.2013.02.007

Xu J; Lee CK; Tan KH, 2013, 'An XFEM plate element for high gradient zones resulted from yield lines', International Journal for Numerical Methods in Engineering, vol. 93, pp. 1314 - 1344, http://dx.doi.org/10.1002/nme.4448

Lee CK; Chiew SP; Jiang J, 2012, 'Residual stress study of welded high strength steel thin-walled plate-to-plate joints part 2: Numerical modeling', Thin-Walled Structures, vol. 59, pp. 120 - 131, http://dx.doi.org/10.1016/j.tws.2012.04.001

Lee CK; Chiew SP; Jiang J, 2012, 'Residual stress study of welded high strength steel thin-walled plate-to-plate joints, Part 1: Experimental study', Thin-Walled Structures, vol. 56, pp. 103 - 112, http://dx.doi.org/10.1016/j.tws.2012.03.015

Xu J; Lee CK; Tan KH, 2012, 'A two-dimensional co-rotational Timoshenko beam element with XFEM formulation', Computational Mechanics, vol. 49, pp. 667 - 683, http://dx.doi.org/10.1007/s00466-011-0670-x

Borges L; Chiew SP; Nussbaumer A; Lee CK, 2012, 'Advanced numerical modeling of cracked tubular K joints: BEM and FEM comparison', Journal of Bridge Engineering, vol. 17, pp. 432 - 442, http://dx.doi.org/10.1061/(ASCE)BE.1943-5592.0000274

Yu Y; Chiew SP; Lee CK, 2011, 'Bond failure of steel beams strengthened with FRP laminates - Part 2: Verification', Composites Part B: Engineering, vol. 42, pp. 1122 - 1134, http://dx.doi.org/10.1016/j.compositesb.2011.03.016

Chiew SP; Yu Y; Lee CK, 2011, 'Bond failure of steel beams strengthened with FRP laminates - Part 1: Model development', Composites Part B: Engineering, vol. 42, pp. 1114 - 1121, http://dx.doi.org/10.1016/j.compositesb.2011.02.015

Lee CK; Chiew SP; Lie ST; Sopha T, 2011, 'Stress concentration factor prediction by the multi-dimensional Lagrangian interpolation method', Engineering Fracture Mechanics, vol. 78, pp. 1008 - 1028, http://dx.doi.org/10.1016/j.engfracmech.2010.11.013

Lee CK; Chiew SP; Lie ST; Sopha T, 2011, 'Comparison of fatigue performances of gapped and partially overlapped CHS K-joints', Engineering Structures, vol. 33, pp. 44 - 52, http://dx.doi.org/10.1016/j.engstruct.2010.09.016

Lee CK; Chiew SP; Lie ST; Nguyen TBN, 2010, 'Adaptive mesh generation procedures for thin-walled tubular structures', Finite Elements in Analysis and Design, vol. 46, pp. 114 - 131, http://dx.doi.org/10.1016/j.finel.2009.06.011

Chiew SP; Lee CK; Lie ST, 2009, 'Research on tubular joints at Nanyang Technological University', The IES Journal Part A: Civil & Structural Engineering, vol. 2, pp. 68 - 84, http://dx.doi.org/10.1080/19373260802582675

Lee CK; Chiew SP; Lie ST; Sopha T; Nguyen TBN, 2009, 'Experimental studies on stress concentration factors for partially overlapped circular hollow section K-joints', Advanced Steel Construction, vol. 5, pp. 481 - 499

Chiew SP; Lee CK; Lie ST; Nguyen TBN, 2009, 'Fatigue study of partially overlapped circular hollow section K-joints. Part 2: Experimental study and validation of numerical models', Engineering Fracture Mechanics, vol. 76, pp. 2408 - 2428, http://dx.doi.org/10.1016/j.engfracmech.2009.08.005

Lee CK; Chiew SP; Lie ST; Nguyen TBN, 2009, 'Fatigue study of partially overlapped circular hollow section K-joints. Part 1: Geometrical models and mesh generation', Engineering Fracture Mechanics, vol. 76, pp. 2445 - 2463, http://dx.doi.org/10.1016/j.engfracmech.2009.08.006

Sopha T; Nguyen TBN; Chiew SP; Lee CK; Lie ST, 2008, 'Stress analysis and fatigue test on partially overlapped chs K-joints', Advanced Steel Construction, vol. 4, pp. 134 - 146, http://www.scopus.com/inward/record.url?eid=2-s2.0-70149106166&partnerID=40&md5=20c2dd63a64448c177cf858b4979b001

Lee CK; Xu QX, 2008, 'Automatic adaptive FE analysis of thin-walled structures using 3D solid elements', International Journal for Numerical Methods in Engineering, vol. 76, pp. 183 - 229, http://dx.doi.org/10.1002/nme.2315

Chiew SP; Lee CK; Lie ST; Ji HL, 2007, 'Fatigue behaviors of square-to-square hollow section T-joint with corner crack. I: Experimental studies', Engineering Fracture Mechanics, vol. 74, pp. 703 - 720, http://dx.doi.org/10.1016/j.engfracmech.2006.06.022

Lee CK; Chiew SP; Lie ST; Ji HL, 2007, 'Fatigue behaviors of square-to-square hollow section T-joint with corner crack. II: Numerical modeling', Engineering Fracture Mechanics, vol. 74, pp. 721 - 738, http://dx.doi.org/10.1016/j.engfracmech.2006.06.021

Lee CK; Shuai YY, 2007, 'An automatic adaptive refinement procedure for the reproducing kernel particle method. Part II: Adaptive refinement', Computational Mechanics, vol. 40, pp. 415 - 427, http://dx.doi.org/10.1007/s00466-006-0113-2

Lie ST; Yang ZM; Chiew SP; Lee CK, 2007, 'The ultimate behaviour of cracked square hollow section T-joints', Advanced Steel Construction, vol. 3, pp. 443 - 458

Lee CK; Shuai YY, 2007, 'An automatic adaptive refinement procedure for the reproducing kernel particle method. Part I: Stress recovery and a posteriori error estimation', Computational Mechanics, vol. 40, pp. 399 - 413, http://dx.doi.org/10.1007/s00466-006-0140-z

Lee CK; Shuai YY, 2007, 'On adaptive refinement analysis for the coupled boundary element method - Reproducing kernel particle method', International Journal of Computational Methods in Engineering Science and Mechanics, vol. 8, pp. 263 - 272, http://dx.doi.org/10.1080/15502280701334392

Lie ST; Shao YB; Lee CK; Chiew SP, 2006, 'Stress intensity factor solutions for semi-elliptical weld-toe cracks in tubular K-joints', Advances in Structural Engineering, vol. 9, pp. 129 - 139, http://dx.doi.org/10.1260/136943306776232891

Lie S-T; Lee C-K; Chiew S-P; Yang Z-M, 2006, 'Static strength of cracked square hollow section T joints under axial loads. II: Numerical', Journal of Structural Engineering, vol. 132, pp. 378 - 386, http://dx.doi.org/10.1061/(ASCE)0733-9445(2006)132:3(378)

Lie S-T; Chiew S-P; Lee C-K; Yang Z-M, 2006, 'Static strength of cracked square hollow section T joints under axial loads. I: Experimental', Journal of Structural Engineering, vol. 132, pp. 368 - 377, http://dx.doi.org/10.1061/(ASCE)0733-9445(2006)132:3(368)

Chiew SP; Lie ST; Lee CK; Yu Y, 2006, 'Bond failure investigation of CFRP-steel adhesive joints', Advanced Steel Construction, vol. 2, pp. 185 - 198

Chiew SP; Lie ST; Lee CK; Ji HL, 2006, 'Crack surface under weld toe in square hollow section T-Joints', Welding in the World, vol. 50, pp. 559 - 566

Lie ST; Lee CK; Chiew SP; Yang ZM, 2006, 'A consistent crack modelling and analysis of rectangular hollow section joints', Finite Elements in Analysis and Design, vol. 42, pp. 639 - 649, http://dx.doi.org/10.1016/j.finel.2005.08.007

Lie ST; Lee CK; Chiew SP; Shao YB, 2005, 'Validation of surface crack stress intensity factors of a tubular K-joint', International Journal of Pressure Vessels and Piping, vol. 82, pp. 610 - 617, http://dx.doi.org/10.1016/j.ijpvp.2005.03.002

Lee CK; Tjhen LS; Chiew SP; Yongbo S, 2005, 'Numerical models verification of cracked tubular T, Y and K-joints under combined loads', Engineering Fracture Mechanics, vol. 72, pp. 983 - 1009, http://dx.doi.org/10.1016/j.engfracmech.2004.07.006

Lee CK; Xu QX, 2005, 'A new automatic adaptive 3D solid mesh generation scheme for thin-walled structures', International Journal for Numerical Methods in Engineering, vol. 62, pp. 1519 - 1558, http://dx.doi.org/10.1002/nme.1239

Lie ST; Lee CK; Chiew SP; Shao YB, 2005, 'Mesh modelling and analysis of cracked uni-planar tubular K-joints', Journal of Constructional Steel Research, vol. 61, pp. 235 - 264, http://dx.doi.org/10.1016/j.jcsr.2004.05.006

Lee CK; Zhou CE, 2004, 'On error estimation and adaptive refinement for element free Galerkin method: Part II: Adaptive refinement', Computers and Structures, vol. 82, pp. 429 - 443, http://dx.doi.org/10.1016/j.compstruc.2003.10.017

Lee CK; Zhou CE, 2004, 'On error estimation and adaptive refinement for element free Galerkin method: Part I: Stress recovery and a posteriori error estimation', Computers and Structures, vol. 82, pp. 413 - 428, http://dx.doi.org/10.1016/j.compstruc.2003.10.018

Fan SC; Liu X; Lee CK, 2004, 'Enriched partition-of-unity finite element method for stress intensity factors at crack tips', Computers and Structures, vol. 82, pp. 445 - 461, http://dx.doi.org/10.1016/j.compstruc.2003.10.019

Lee CK; Lie ST; Shuai YY, 2004, 'On coupling of reproducing kernel particle method and boundary element method', Computational Mechanics, vol. 34, pp. 282 - 297, http://dx.doi.org/10.1007/s00466-004-0572-2

Lie S-T; Chiew S-P; Lee C-K; Huang Z-W, 2004, 'Fatigue performance of cracked tubular T joints under combined loads. II: Numerical', Journal of Structural Engineering, vol. 130, pp. 572 - 581, http://dx.doi.org/10.1061/(ASCE)0733-9445(2004)130:4(572)

Chiew S-P; Lie S-T; Lee C-K; Huang Z-W, 2004, 'Fatigue performance of cracked tubular T joints under combined loads. I: Experimental', Journal of Structural Engineering, vol. 130, pp. 562 - 571, http://dx.doi.org/10.1061/(ASCE)0733-9445(2004)130:4(562)

Lee YK; Lee CK, 2003, 'A new indirect anisotropic quadrilateral mesh generation scheme with enchanced local mesh smoothing procedures', International Journal for Numerical Methods in Engineering, vol. 58, pp. 277 - 300, http://dx.doi.org/10.1002/nme.771

Showing 51 - 100 of 247 publications
Previous
1
2
3
4
5
Next