Amar Khennane

Post graduate Research Coordinator
Senior Lecturer

Research Experience
 

  • Bio-Cementitious materials
  • Composite materials
  • Timber
  • Reinforced concrete
  • Hybrid Structure
  • Publications - Books: 2,  Peer-reviewed Journal papers: 47, Conference Papers: 33 Other: 6


Teaching Experience

Structural Analysis

Finite Element Method

Reinforced Concrete

Stress/Strain Analysis

http://au.mathworks.com/support/books/book118765.html

Additional Experience
 

  • Maitre de Conferences (Tizi-Ouzou, Algeria)
  • Research Associate (Newcastle, Australia)
  • Lecturer/Senior Lecturer (USQ, Australia)

 

Preprints
add
Katoozi E; Liow J-L; Khennane A, 2022, Direct Colorimetric Measurement of Copper with Sodium Diethyldithiocarbamate as the Reagent in the Presence of Ferric Ions, http://dx.doi.org/10.2139/ssrn.4037123
2022
Books
add
Khennane A, 2013, Introduction to Finite Element Analysis Using MATLAB® and Abaqus, CRC Press (Taylord and Francis Group), Boca Raton Florida, USA, http://dx.doi.org/10.1201/b15042
2013
Book Chapters
add
Liow JL; Khennane A; Muley M; Sorial H; Katoozi E, 2022, 'Recycling of Chrome-Copper-Arsenic Timber Through Cement Particleboard Manufacture', in Sustainable Production, Life Cycle Engineering and Management, pp. 111 - 122, http://dx.doi.org/10.1007/978-3-030-90217-9_10
2022
2013, 'Bar Element', in Introduction to Finite Element Analysis Using MATLAB and Abaqus, CRC Press, pp. 35 - 92, http://dx.doi.org/10.1201/b15042-7
2013
Khennane A, 2013, 'Rigid Jointed Frames', in INTRODUCTION TO FINITE ELEMENT ANALYSIS USING MATLAB(R) AND ABAQUS, CRC PRESS-TAYLOR & FRANCIS GROUP, pp. 107 - 134, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000355629000005&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1
2013
2013, 'Rigid Jointed Frames', in Introduction to Finite Element Analysis Using MATLAB and Abaqus, CRC Press, pp. 137 - 164, http://dx.doi.org/10.1201/b15042-9
2013
Khennane A, 2013, 'Finite Element Approximation', in INTRODUCTION TO FINITE ELEMENT ANALYSIS USING MATLAB(R) AND ABAQUS, CRC PRESS-TAYLOR & FRANCIS GROUP, pp. 191 - 210, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000355629000008&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1
2013
2013, 'Introduction', in Introduction to Finite Element Analysis Using MATLAB® and Abaqus, CRC Press, http://dx.doi.org/10.1201/b15042-2
2013
Khennane A, 2013, 'Numerical Integration', in INTRODUCTION TO FINITE ELEMENT ANALYSIS USING MATLAB(R) AND ABAQUS, CRC PRESS-TAYLOR & FRANCIS GROUP, pp. 211 - 230, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000355629000009&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1
2013
Bai J; Frollini E; Silva CG; Ramires EC; Miskolczi N; Sarasini F; Santulli C; Fiore V; Valenza A; Pansart S; Bickerton S; Govignon Q; Kelly P; Khennane A; Correia JR; Al-Shawaf A; Guedes RM; Xavier J; Benzarti K; Colin X; Turvey GJ; Fahmy MFM; Panzera TH; Christoforo AL; Ribeiro Borges PH; Hollaway LC; Taheri F; Zainuddin S; Hosur MV; Jeelani S; Kumar A; Trovillion J; Custódio J; Laboratório Nacional de SC-F, 2013, 'Contributor contact details', in Advanced Fibre-Reinforced Polymer (FRP) Composites for Structural Applications, Elsevier, pp. xv - xviii, http://dx.doi.org/10.1016/b978-0-85709-418-6.50025-9
2013
Khennane A, 2013, 'Plane Problems', in INTRODUCTION TO FINITE ELEMENT ANALYSIS USING MATLAB(R) AND ABAQUS, CRC PRESS-TAYLOR & FRANCIS GROUP, pp. 231 - 351, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000355629000010&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1
2013
Khennane A, 2013, 'Stress and Strain Analysis', in INTRODUCTION TO FINITE ELEMENT ANALYSIS USING MATLAB(R) AND ABAQUS, CRC PRESS-TAYLOR & FRANCIS GROUP, pp. 135 - 174, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000355629000006&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1
2013
Khennane A, 2013, 'Weighted Residual Methods', in INTRODUCTION TO FINITE ELEMENT ANALYSIS USING MATLAB(R) AND ABAQUS, CRC PRESS-TAYLOR & FRANCIS GROUP, pp. 175 - 189, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000355629000007&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1
2013
2013, 'Stress and Strain Analysis', in Introduction to Finite Element Analysis Using MATLAB and Abaqus, CRC Press, pp. 165 - 204, http://dx.doi.org/10.1201/b15042-10
2013
Khennane A, 2013, 'Filament Winding Processes in the Manufacture of Advanced Fibre-Reinforced Polymer (FRP) Composites', in Advanced fbre-reinforced polymer (FRP) composites for structural applications, WP Woodhead Publishing, Oxford, pp. 187 - 206, http://dx.doi.org/10.1533/9780857098641.2.187
2013
2013, 'Numerical Integration', in Introduction to Finite Element Analysis Using MATLAB and Abaqus, CRC Press, pp. 241 - 260, http://dx.doi.org/10.1201/b15042-13
2013
Khennane A, 2013, 'Axisymmetric Problems', in INTRODUCTION TO FINITE ELEMENT ANALYSIS USING MATLAB(R) AND ABAQUS, CRC PRESS-TAYLOR & FRANCIS GROUP, pp. 353 - 377, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000355629000011&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1
2013
2013, 'Thin and Thick Plates', in Introduction to Finite Element Analysis Using MATLAB and Abaqus, CRC Press, pp. 409 - 448, http://dx.doi.org/10.1201/b15042-16
2013
Khennane A, 2013, 'Bar Element', in INTRODUCTION TO FINITE ELEMENT ANALYSIS USING MATLAB(R) AND ABAQUS, CRC PRESS-TAYLOR & FRANCIS GROUP, pp. 5 - 61, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000355629000003&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1
2013
Khennane A, 2013, '8 Filament winding processes in the manufacture of advanced fibre-reinforced polymer (FRP) composites', in Advanced Fibre-Reinforced Polymer (FRP) Composites for Structural Applications, Elsevier, pp. 187 - 206, http://dx.doi.org/10.1533/9780857098641.2.187
2013
2013, 'Introduction', in Introduction to Finite Element Analysis Using MATLAB and Abaqus, CRC Press, pp. 31 - 34, http://dx.doi.org/10.1201/b15042-6
2013
2013, 'Plane Problems', in Introduction to Finite Element Analysis Using MATLAB and Abaqus, CRC Press, pp. 261 - 382, http://dx.doi.org/10.1201/b15042-14
2013
2013, 'Axisymmetric Problems', in Introduction to Finite Element Analysis Using MATLAB and Abaqus, CRC Press, pp. 383 - 408, http://dx.doi.org/10.1201/b15042-15
2013
2013, 'Weighted Residual Methods', in Introduction to Finite Element Analysis Using MATLAB and Abaqus, CRC Press, pp. 205 - 220, http://dx.doi.org/10.1201/b15042-11
2013
2013, 'Finite Element Approximation', in Introduction to Finite Element Analysis Using MATLAB and Abaqus, CRC Press, pp. 221 - 240, http://dx.doi.org/10.1201/b15042-12
2013
Khennane A, 2013, 'Thin and Thick Plates', in INTRODUCTION TO FINITE ELEMENT ANALYSIS USING MATLAB(R) AND ABAQUS, CRC PRESS-TAYLOR & FRANCIS GROUP, pp. 379 - 418, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000355629000012&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1
2013
2013, 'Beam Element', in Introduction to Finite Element Analysis Using MATLAB and Abaqus, CRC Press, pp. 93 - 136, http://dx.doi.org/10.1201/b15042-8
2013
Khennane A, 2013, 'Beam Element', in INTRODUCTION TO FINITE ELEMENT ANALYSIS USING MATLAB(R) AND ABAQUS, CRC PRESS-TAYLOR & FRANCIS GROUP, pp. 63 - 105, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000355629000004&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1
2013
Conference Papers
add
Elbana A; Khennane A; Al-Deen S; Junaid MT, 2022, 'Multi-Scale Modelling of Particulate Composite', in The 3rd Built Environment Research Forum, MDPI, presented at BERF3, http://dx.doi.org/10.3390/environsciproc2021012023
2022
Reza W; Khennane A; Khelifa M, 2022, 'FLEXURAL BEHAVIOR OF A BRACED HYBRID STEEL-TIMBER BEAM', in Proceedings of International Structural Engineering and Construction, pp. TCC-01-1-TCC-01-6, http://dx.doi.org/10.14455/ISEC.2022.9(1).TCC-01
2022
Li Z; Khennane A; Wang H; Hazell P; Escobedo-Diaz J, 2021, 'Effects of Impactor Geometry on Pultruded Composites Under Low-Velocity Impact Loading', Istanbul, Turkey, presented at 10th International Conference on FRP Composites in Civil Engineering, Istanbul, Turkey, 08 December 2021 - 10 December 2021, http://dx.doi.org/10.1007/978-3-030-88166-5_69
2021
Pathak S; Watt S; Khennane A; Al-Deen S, 2019, 'Evaluation of P-Delta instability in hardening oscillators using dynamical systems approach', in El Sawah, S. (ed.) MODSIM2019, 23rd International Congress on Modelling and Simulation., Modelling and Simulation Society of Australia and New Zealand, Canberra, presented at 23rd International Congress on Modelling and Simulation (MODSIM2019), Canberra, 01 December 2019, http://dx.doi.org/10.36334/modsim.2019.a5.pathak
2019
Li Z; Wang H; Aryal B; Hazell P; Khennane A; Shankar K; Escobedo-Diaz J, 2019, 'Effects of impactor mass on pultruded profiles subjected to low-velocity impacts', in Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications, Cape Town, South Africa, presented at 7th International Conference on Structural Engineering, Mechanics and Computation (SEMC 2019), Cape Town, South Africa, 02 September 2019 - 04 September 2019, http://dx.doi.org/10.1201/9780429426506
2019
Li Z; Wang H; Aryal B; Hazell PJ; Khennane A; Shankar K; Escobedo-Diaz JP, 2019, 'Effects of impactor mass on pultruded profiles subjected to low-velocity impacts', in Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications, Taylor & Francis, pp. 623 - 627, http://dx.doi.org/10.1201/9780429426506-109
2019
Pathak S; Khennane A; Al-Deen S, 2019, 'SEISMIC COLLAPSE RISK ASSESSMENT USING A POWER BASED PERFORMANCE INDICATOR', in 5th International Conference On Earthquake Engineering And Seismology, METU, Ankara, Turkey, presented at 5th International Conference On Earthquake Engineering And Seismology, METU, Ankara, Turkey, 08 October 2019 - 11 October 2019, http://www.5icees.com/wp-content/uploads/2019/10/Hall-A-Building-Fragility-Chairman-Bekir-Ozer-Ay-METU.zip
2019
Khennane A; Tekle B; Kayali O, 2018, 'Parametric Study on Bond of GFRP Bars in Alkali Activated Cement Concrete', in FERRIER E; BENZARTI K; CARON J-F (eds.), 9th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE 2018), PARIS 17-19 JULY 2018, Institute of Civil Engineers (ICE) publishing, PARIS, presented at 9th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE 2018),, PARIS, 17 July 2018 - 19 July 2018, http://www.cice2018.com/en
2018
Pathak S; Al-Deen S; Khennane A, 2018, 'Stochastic analysis of structural collapse based on extended energy method approach', in Australian Structural Engineering Conference: ASEC 2018, Engineers Australia, Adelaide, Australia, presented at Australian Structural Engineering Conference: ASEC 2018, Adelaide, Australia, 25 September 2018 - 28 September 2018, https://search.informit.com.au/documentSummary;dn=966689939416475;res=IELENG
2018
Khennane A; Tekle B; Kayali O, 2017, 'Bond Behavior of GFRP reinforced geopolymer cement concrete', in Shanableh A; Maalej M; Barakat S; Omar ; Al-Toubat S; Al-Ruzouq R; Hamad K (eds.), MATEC Web of Conferences, The University of Sharjah, Sharjah, United Arab Emirates, presented at International Conference on Advances in Sustainable Construction Materials & Civil Engineering Systems (ASCMCES-17), Sharjah, United Arab Emirates, 17 April 2017 - 20 April 2017, http://dx.doi.org/10.1051/matecconf/201712004002
2017
Pathak S; Khennane A; Al-Deen S, 2017, 'Energy Formulation for Seismic Collapse Assessment of RCC Structures: Improvements in Performance Design', in Energy Formulation for Seismic Collapse Assessment of RCC Structures: Improvements in Performance Design, Australian Earthquake Engineering Society 2017 Conference, Canberra, Australia, presented at Australian Earthquake Engineering Society 2017 Conference, Canberra, Australia, 24 November 2017 - 26 November 2017
2017
Li Z; Khennane A; Hazell PJ; Remennikov A, 2017, 'Numerical modeling of a hybrid GFRP-concrete beam subjected to low-velocity impact loading', in Liu GR; Xu H; Zirui L (eds.), International Conference on Computational Methods Full Paper Proceedings, Scientech Publisher LLC, USA, Guilin, Guangxi, China, pp. 768 - 776, presented at The 8th international conference on computational methods, Guilin, Guangxi, China, 25 July 2017 - 29 July 2017, http://www.sci-en-tech.com/ICCM2018/Paper%20Proceedings%20for%20Download.pdf
2017
Tekle BH; Cui Y; Khennane A; Kayali O, 2016, 'Comparison of bond properties of steel and sand-coated GFRP bars in fly Ash-based geopolymer concrete', in Proceedings of the 8th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering, CICE 2016, pp. 122 - 128
2016
Khennane A; Kayali O; Junaid M, 2016, 'Stress-Strain Behaviour of Alkali Activated Fly-Ash Concrete at Elevated Temperatures', in Schmidt W; Msinjili S (ed.), Advances in Cement and Concrete Technology in Africa. Proceedings 2nd International Conference Dar es Salaam, Tanzania January 27 -29 2016, Advances in Cement and Concrete Technology in Africa, Dar es Salaam, Tanzania, presented at Advances in Cement and Concrete Technology in Africa, Dar es Salaam, Tanzania, 27 January 2016 - 29 January 2016
2016
Sadaoui A; Lattari K; Khennane A, 2015, 'Response of rc columns with transient creep in a natural fire environment', in COUPLED PROBLEMS 2015 - Proceedings of the 6th International Conference on Coupled Problems in Science and Engineering, pp. 1312 - 1323
2015
Khennane A; Tekle BH; Kayali O, 2015, 'Bond properties of glass fibre reinforced polymer bars with fly-ash based geopolymer concrete', in Bond properties of glass fibre reinforced polymer bars with fly-ash based geopolymer concrete, 10th International Conference on Composite Science and Technology, ICCST/10, Lisbon, Portugal, presented at 10th International Conference on Composite Science and Technology, ICCST/10, Lisbon, Portugal, 02 September 2015 - 04 September 2015
2015
Khennane A; tekle BH; kayali O, 2015, 'Finite element modelling of bond behaviour of glass fibre reinforced polymer bars with fly-ash based geopolymer concrete', in Finite element modelling of bond behaviour of glass fibre reinforced polymer bars with fly-ash based geopolymer concrete, The 2nd Australasian Conference on Computational Mechanics (ACCM2015), Brisbane, Australia, presented at The 2nd Australasian Conference on Computational Mechanics (ACCM2015), Brisbane, Australia, 30 November 2015 - 01 December 2015
2015
Sadaoui A; Khennane A; Fafard M, 2014, 'Fire resistance analysis of RC elements with restrained thermal elongation in a natural fire', in Computational Modelling of Concrete Structures - Proceedings of EURO-C 2014, pp. 603 - 608, http://dx.doi.org/10.1201/b16645-68
2014
Junaid MT; Khennane A; Kayali O, 2014, 'Investigation into the effect of the duration of exposure on the behaviour of GPC at elevated temperatures', in MATEC Web of Conferences, http://dx.doi.org/10.1051/matecconf/20141101003
2014
Sadaoui A; Illouli S; Khennane A, 2013, 'Effect of restraints on the response of RC columns in a parametric fire', in Proceedings of the 8th International Conference on Fracture Mechanics of Concrete and Concrete Structures, FraMCoS 2013, Toledo; Spain, pp. 735 - 744, presented at 8th International Conference on Fracture Mechanics of Concrete and Concrete Structures, FraMCoS 2013, Toledo; Spain, 11 March 2013 - 14 March 2013
2013
Islam SMS; Khennane A, 2013, 'An optimized nonlinear finite element design for continuous RC deep beams', in ISEC 2013 - 7th International Structural Engineering and Construction Conference: New Developments in Structural Engineering and Construction, pp. 403 - 408, http://dx.doi.org/10.3850/978-981-07-5354-2-St-188-535
2013
Shahidul Islam SM; Khennane A, 2013, 'An Optimized Nonlinear Finite Element Design For Continuous Rc Deep Beams', in Proceedings of the New Developments in Structural Engineering and Construction, Research Publishing Services, pp. 403 - 408, presented at The Seventh International Structural Engineering and Construction Conference, - 23 June 2013, http://dx.doi.org/10.3850/978-981-07-5354-2_st-188-535
2013
Ferdous MW; Khennane A; Kayali O, 2013, 'Hybrid FRP-concrete railway sleeper', in Advanced Composites in Construction 2013, ACIC 2013 - Conference Proceedings, Belfast, UK, pp. 67 - 77, presented at Advanced Composites in Construction 2013, ACIC 2013 - Conference Proceedings, Belfast, UK, 10 September 2013 - 12 September 2013
2013
Ferdous MW; Kayali O; Khennane A, 2013, 'A detailed procedure of mix design for fly ash based geopolymer concrete', in Proceedings of the 4th Asia-Pacific Conference on FRP in Structures, APFIS 2013
2013
Chakrabortty A; Khennane A, 2012, 'EFFECT OF CONFINEMENT ON THE BEHAVIOUR OF HYBRID FRP-CONCRETE BEAMS', in Proceedings: IIFC Official Conferences, CICE 2012, Rome, Italy, 13-15 June 2012, IIFC International Institute for FRP in Construction, Web, presented at CICE2012 Composites in Civil Engineering, Rome, 13 June 2012 - 15 June 2012, http://www.iifc-hq.org/proceedings/CICE_2012/06_Hybrid%20FRP%20Structures/06_426_Khennane,Chakrabortty_EFFECT%20OF%20CONFINEMENT%20ON%20THE%20BEHAVIOUR%20OF%20HYBRID.pdf
2012
Islam SMS; Khennane A, 2012, 'Experimental Varification of Automated Design for the Reinforcement in Deep Beams with Openings', in Research, Development and Practice in Structural Engineering and Construction, Research Publishing Services, pp. 303 - 308, presented at Research, Development and Practice in Structural Engineering and Construction, 28 November 2012 - 02 December 2012, http://dx.doi.org/10.3850/978-981-08-7920-4_st-16-0073
2012
Junaid MT; Kayali O; Khennane A, 2012, 'Mix Design Procedure for Alkali Activated Fly Ash-Based Geopolymer Concretes', in 2012 International Conference on Engineering and Applied Science, ICEAS 2012 : International Conference on Engineering and Applied Science, Beijing, China, pp. 139 - 152, presented at ICEAS 2012 : International Conference on Engineering and Applied Science, Beijing, China, 24 July 2012 - 27 July 2012
2012
Chakrabortty A; Khennane A, 2012, 'Effect of concrete block thickness on the behavior of hybrid FRP concrete beams', in ACUN6 Conference proceedings, Monash University UNSW, Australia, pp. 71 - 76, presented at ACUN 6 Composites & Nanocomposites in Civil, Offshore and Mining Infrastructure, Melbourne, 14 November 2012 - 16 November 2012, http://www.acun6.org/
2012
Islam SMS; Khennane A, 2011, 'An Optimized Nonlinear Finite Element Design for Reinforced Concrete Deep Beams', in Modern Methods and Advances in Structural Engineering and Construction(ISEC-6), Research Publishing Services, pp. 729 - 734, presented at Modern Methods and Advances in Structural Engineering and Construction, 21 June 2011 - 26 June 2011, http://dx.doi.org/10.3850/978-981-08-7920-4_s2-s21-cd
2011
Islam S; Khennane A, 2011, 'An optimized nonlinear finite element design for reinforced concrete deep beams', in Modern methods and advances in Structural Engineering and Construction,, Research Publishing, Singapore, pp. 729 - 734, presented at ISEC-6 Conference, Zurich, Switzerland, 21 June 2011 - 26 June 2011, http://dx.doi.org/10.3850/978-981-08-7920-4-S2-S21-cd
2011
Chakrabortty A; Khennane A; Morozov EV, 2010, 'An Experimental Investigation into the Behaviour of Filament Wound Hybrid FRP-Concrete Beam', in Advances in FRP Composites in Civil Engineering, Tsinghua University Press, Beijing, China, pp. 228 - 231, presented at 5th International Conference on FRP Composites in Civil Engineering, Beijing, China, 27 September 2010 - 29 September 2010, http://www.cice2010.net/Contents.htm
2010
Leo B; Chakrabortty A; Khennane A, 2010, 'A Design Concept for an All Composte Road Bridge', in Advances in FRP Composites in Civil Engineering, Tsinghua University Press, Beijing, China, pp. 156 - 159, presented at 5th International Conference on FRP Composites in Civil Engineering, Beijing, China, 27 September 2010 - 29 September 2010, http://www.cice2010.net/Contents.htm
2010
Khennane A; Heslehurst RB, 2009, 'A New Design Approach for a Hybrid FRP-Concrete Beam', in A New Design Approach for a Hybrid FRP-Concrete Beam, Composites Australia Conference and Exhibition 2009, Gold Coast, presented at Composites Australia Conference and Exhibition 2009, Gold Coast, 12 March 2009 - 13 March 2009, http://www.compositesconference.com/presentations09/
2009
Khennane A, 2008, 'A new design concept for a hybrid beam FRP-High strength concrete beam for infrastructure applications', in FRP Composities in Civil Engineering, CICE 2008, FRP Composities in Civil Engineering, Zurich, Switzerland, presented at CICE 2008, FRP Composities in Civil Engineering, Zurich, Switzerland, 22 July 2008 - 24 July 2008
2008
Khennane A; Tran-Cong T, 2007, 'Timoshenko beam-solution in terms of integrated radial basis functions', in Proceedings of the 5th Australasian Congress on Applied Mechanics : 10-12 December 2007, Brisbane, Australia, Engineers Australia, Brisbane, Queensland, Australia, presented at 5th Australian Congress on Applied Mechanics, ACAM 2007, Brisbane, Qld, 10 December 2007 - 12 December 2007
2007
Khennane A; Melchers R; Andersons J, 2006, 'A stress corrosion cracking model for glass fibres based on statistical distribution of surface flaws', in A stress corrosion cracking model for glass fibres based on statistical distribution of surface flaws, 12th European Conference on Composite Materials, Biarritz, France, presented at 12th European Conference on Composite Materials, Biarritz, France, 29 August 2006 - 01 September 2006
2006
Khennane A; Melchers R, 2005, 'A meso-scale finite element model for environmental stress corrosion of GFRP', in Proceedings of the fourth Australasian Congress on Applied Mechanics, Australasian Congress on Applied Mechanics, Melbourne, Victoria, pp. 573 - 578, presented at 4th Australasian Congress on Applied Mechanics, Melbourne, 16 February 2005 - 18 February 2005
2005
Conference Presentations
add
Yu YUGUO; Khennane AMAR; Zhang YX, 2015, 'Numerical modelling of degradation of cement paste under external sulfate attack', Vol. 846, pp. 127 - 132, presented at the 2nd Australiasian Conference on Computational Mechanics (ACCM2015), Brisbane, Australia, 30 November 2015 - 01 December 2015
2015
Hieu NV; Khennane A; Tran-Cong T, 2006, 'Monte-Carlo simulation of the durability of glass fibre reinforced composite under environmental stress corrosion', presented at International Conference on Nonlinear Analysis & Engineering Mechanics Today, Institute of Applied Mechanics, Vietnamese Academy of Science and Technology, Vietnam, 11 December 2006 - 14 December 2006
2006
Sadaoui A; Khennane A; Kaci S, 2003, 'Nonlinear Analysis of Reinforced Concrete Beams in a Fire Environment', presented at Extreme Loading Conference, XL2003, Toronto, Canada, 06 August 2003
2003
Journal articles
add
Khelifa M; Khennane A; Oudjene M, 2022, 'Modelling of Strengthened Steel Connections under Static and Cyclic Loading', Buildings, vol. 12, http://dx.doi.org/10.3390/buildings12111962
2022
Tran TT; Khennane A; Khelifa M; Girods P; Oudjene M; Rogaume Y, 2022, 'Application of kinetic pyrolysis models to the analysis of flax chipboards under fire', Case Studies in Construction Materials, vol. 16, http://dx.doi.org/10.1016/j.cscm.2022.e00873
2022
Khennane A; Reza W; Khelifa M, 2022, 'FLEXURAL BEHAVIOR OF A BRACED HYBRID STEEL-TIMBER BEAM', Proceedings of International Structural Engineering and Construction, vol. 9, http://dx.doi.org/10.14455/10.14455/isec.2022.9(1).tcc-01
2022
Li Z; Ameri AAH; Hazell PJ; Khennane A; Escobedo-Diaz JP; Aryal B; Wang H, 2021, 'Effects of impactor mass on the low-velocity impact behaviour of thick GFRP pultruded laminates', Construction and Building Materials, vol. 279, pp. 122491 - 122491, http://dx.doi.org/10.1016/j.conbuildmat.2021.122491
2021
Pathak S; Watt S; Khennane A; Al-Deen S, 2020, 'Dynamical systems approach for the evaluation of seismic structural collapse and its integration into PBEE framework', Soil Dynamics and Earthquake Engineering, vol. 135, pp. 106184 - 106184, http://dx.doi.org/10.1016/j.soildyn.2020.106184
2020
Pathak S; Khennane A; Watt S; Al-Deen S, 2020, 'Effectiveness of physics-based collapse criteria in seismic risk assessment of code-conforming low-rise RC framed structures', Structures, vol. 27, pp. 440 - 461, http://dx.doi.org/10.1016/j.istruc.2020.05.033
2020
Tekle BH; Khennane A, 2020, 'Parametric study on bond of GFRP bars in alkali-activated cement concrete', Magazine of Concrete Research, vol. 72, pp. 670 - 680, http://dx.doi.org/10.1680/jmacr.18.00364
2020
Pathak S; Khennane A; Al-Deen S, 2020, 'Power based seismic collapse criterion for ductile and non-ductile framed structures', Bulletin of Earthquake Engineering, vol. 18, pp. 5983 - 6014, http://dx.doi.org/10.1007/s10518-020-00925-w
2020
Tekle BH; Cui Y; Khennane A, 2020, 'Bond properties of steel and sand-coated GFRP bars in Alkali activated cement concrete', Structural Engineering and Mechanics, vol. 75, pp. 123 - 131, http://dx.doi.org/10.12989/sem.2020.75.1.123
2020
Illouli S; Sadaoui A; Khennane A, 2019, 'Application of the theory statically indeterminate structures of infinite degree to a cable-truss footbridge under lateral forces', Engineering Structures, vol. 188, pp. 665 - 676, http://dx.doi.org/10.1016/j.engstruct.2019.03.063
2019
Li M; Khelifa M; Khennane A; El Ganaoui M, 2019, 'Structural response of cement-bonded wood composite panels as permanent formwork', Composite Structures, vol. 209, pp. 13 - 22, http://dx.doi.org/10.1016/j.compstruct.2018.10.079
2019
Li M; Khennane A; Brandelet B; El Ganaoui M; Khelifa M; Rogaume Y, 2018, 'Modelling of heat transfer through permanent formwork panels exposed to high temperatures', Construction and Building Materials, vol. 185, pp. 166 - 174, http://dx.doi.org/10.1016/j.conbuildmat.2018.07.052
2018
Li Z; Khennane A; Hazell PJ; Remennikov AM, 2018, 'Performance of a hybrid GFRP-concrete beam subject to low-velocity impacts', Composite Structures, vol. 206, pp. 425 - 438, http://dx.doi.org/10.1016/j.compstruct.2018.08.036
2018
Sadaoui A; Lattari K; Khennane A, 2017, 'Effects of temperature changes on the behaviour of a cable truss system', Journal of Constructional Steel Research, vol. 129, pp. 111 - 118, http://dx.doi.org/10.1016/j.jcsr.2016.11.013
2017
Li Z; Khennane A; Hazell PJ; Brown AD, 2017, 'Impact behaviour of pultruded GFRP composites under low-velocity impact loading', Composite Structures, vol. 168, pp. 360 - 371, http://dx.doi.org/10.1016/j.compstruct.2017.02.073
2017
Tekle BH; Khennane A; Kayali O, 2017, 'Bond behaviour of GFRP reinforcement in alkali activated cement concrete', Construction and Building Materials, vol. 154, pp. 972 - 972, http://dx.doi.org/10.1016/j.conbuildmat.2017.08.029
2017
Tekle BH; Khennane A; Kayali O, 2017, 'Bond of spliced GFRP reinforcement bars in alkali activated cement concrete', Engineering Structures, vol. 147, pp. 740 - 751, http://dx.doi.org/10.1016/j.engstruct.2017.06.040
2017
Tekle BH; Khennane A; Kayali O, 2017, 'Bond behaviour of GFRP reinforced geopolymer cement concrete', MATEC Web of Conferences, vol. 120, http://dx.doi.org/10.1051/matecconf/201712004002
2017
Khennane A; Kayali O; Junaid MT, 2016, 'Response of alkali activated low calcium fly-ash based geopolymer concrete under compressive load at elevated temperatures', Materials and Structures (2017) 50:50, vol. 50, http://dx.doi.org/10.1617/s11527-016-0877-6
2016
Tekle BH; Khennane A; Kayali O, 2016, 'Bond properties of sand-coated GFRP bars with fly ash-based geopolymer concrete', Journal of Composites for Construction, vol. 20, http://dx.doi.org/10.1061/(ASCE)CC.1943-5614.0000685
2016
Yu YUGUO; Khennane A; Zhang Y, 2016, 'Numerical modelling of degradation of cement paste under external sulfate attack', Applied Mechanics and Materials, vol. 846, pp. 127 - 132, http://dx.doi.org/10.4028/www.scientific.net/AMM.846.127
2016
Sadaoui A; Lattari K; Khennane A, 2016, 'A novel analytical method for the analysis of a bi-concave cable-truss footbridge', Engineering Structures, vol. 123, pp. 97 - 107, http://dx.doi.org/10.1016/j.engstruct.2016.05.025
2016
Khelifa M; Khennane A; El Ganaoui M; Celzard A, 2016, 'Numerical damage prediction in dowel connections of wooden structures', Materials and Structures/Materiaux et Constructions, vol. 49, pp. 1829 - 1840, http://dx.doi.org/10.1617/s11527-015-0615-5
2016
Khennane A; Khelifa M; El Ganaoui M, 2015, 'Numerical modelling of 3D dowelled timber joints using advanced fully coupled hydro-mechanical constitutive equations', Mechanics & Industry, vol. 16, pp. 501 - 501, http://dx.doi.org/10.1051/meca/2015034
2015
Yu Y; Zhang YX; Khennane A, 2015, 'Numerical modelling of degradation of cement-based materials under leaching and external sulfate attack', Computers and Structures, vol. 158, pp. 1 - 14, http://dx.doi.org/10.1016/j.compstruc.2015.05.030
2015
Junaid MT; Khennane A; Kayali O, 2015, 'Performance of fly ash based geopolymer concrete made using non-pelletized fly ash aggregates after exposure to high temperatures', Materials and Structures/Materiaux et Constructions, vol. 48, pp. 3357 - 3365, http://dx.doi.org/10.1617/s11527-014-0404-6
2015
Junaid MT; Kayali O; Khennane A; Black J, 2015, 'A mix design procedure for low calcium alkali activated fly ash-based concretes', Construction and Building Materials, vol. 79, pp. 301 - 310, http://dx.doi.org/10.1016/j.conbuildmat.2015.01.048
2015
Ferdous W; Manalo A; Khennane A; Kayali O, 2015, 'Geopolymer concrete-filled pultruded composite beams - Concrete mix design and application', Cement and Concrete Composites, vol. 58, pp. 1 - 13, http://dx.doi.org/10.1016/j.cemconcomp.2014.12.012
2015
Khelifa M; Khennane A; El Ganaoui M; Celzard A, 2015, 'Erratum to: Numerical damage prediction in dowel connections of wooden structures (Materials and Structures, DOI: 10.1617/s11527-015-0615-5)', Materials and Structures/Materiaux et Constructions, vol. 49, pp. 1841 - 1842, http://dx.doi.org/10.1617/s11527-015-0679-2
2015
Li Z; Khennane A; Hazell PJ, 2015, 'Numerical Investigation of a Hybrid FRP-Geopolymer Concrete Beam', Numerical Investigation of a Hybrid FRP-Geopolymer Concrete Beam
2015
Khelifa M; Vila Loperena N; Bleron L; Khennane A, 2014, 'Analysis of CFRP-strengthened timber beams', Journal of Adhesion Science and Technology, vol. 28, pp. 1 - 14, http://dx.doi.org/10.1080/01694243.2013.815096
2014
Khennane A; Khelifa M; Bleron L; Viguier J, 2014, 'Numerical modelling of ductile damage evolution in tensile and bending tests of timber structures', Mechanics of Materials, vol. 68, pp. 228 - 236, http://dx.doi.org/10.1016/j.mechmat.2013.09.004
2014
Chakrabortty A; Khennane A, 2014, 'l Failure mechanisms of hybrid FRP-concrete beams with external filament-wound wrapping', ADVANCES IN CONCRETE CONSTRUCTION, vol. 2, pp. 57 - 75, http://dx.doi.org/10.12989/acc.2014.2.1.057
2014
Junaid MT; Khennane A; Kayali O; Sadaoui A; Picard D; Fafard M, 2014, 'Aspects of the deformational behaviour of alkali activated fly ash concrete at elevated temperatures', Cement and Concrete Research, vol. 60, pp. 24 - 29, http://dx.doi.org/10.1016/j.cemconres.2014.01.026
2014
Khelifa M; Khennane A; El Ganaoui M; Rogaume Y, 2014, 'Analysis of the behavior of multiple dowel timber connections in fire', Fire Safety Journal, vol. 68, pp. 119 - 128, http://dx.doi.org/10.1016/j.firesaf.2014.05.024
2014
Khelifa M; Khennane A, 2014, 'Numerical analysis of the cutting forces in timber', Journal of Engineering Mechanics, vol. 140, pp. 523 - 530, http://dx.doi.org/10.1061/(ASCE)EM.1943-7889.0000671
2014
Islam S; Khennane A, 2013, 'Computer Aided Design of RC Structures', International Journal of Concrete Structures and Materials, vol. 7, pp. 127 - 133, http://dx.doi.org/10.1007/s40069-012-0027-7
2013
Sadaoui A; Khennane A, 2012, 'Effect of Transient Creep on Behavior of Reinforced Concrete Beams in Fire', ACI Materials Journal, vol. 109, pp. 606 - 616, http://dx.doi.org/10.14359/51684158
2012
Chakrabortty A; Khennane A; Kayali O; Morozov EV, 2011, 'Performance of outside filament-wound hybrid FRP-concrete beams', Composites Part B - Engineering, vol. 42, pp. 907 - 915, http://dx.doi.org/10.1016/j.compositesb.2011.01.003
2011
Khennane A, 2010, 'Manufacture and testing of a hybrid beam using a pultruded profile and high strength concrete', Australian Journal of Structural Engineering, vol. 10, pp. 145 - 156, http://dx.doi.org/10.1080/13287982.2010.11465040
2010
Dahmani L; Khennane A; Kaci S, 2010, 'Crack identification in reinforced concrete beams using ANSYS software', Strength of Materials, vol. 42, pp. 232 - 240, http://dx.doi.org/10.1007/s11223-010-9212-6
2010
Sadaoui A; Khennane A, 2009, 'Effect of transient creep on the behaviour of reinforced concrete columns in fire', Engineering Structures, vol. 31, pp. 2203 - 2208, http://dx.doi.org/10.1016/j.engstruct.2009.04.005
2009
Dahmani L; Khennane A; Kaci S, 2009, 'Modeling and influence of shear retention parameter on the response of reinforced concrete structural elements', Strength of Materials, vol. 41, pp. 423 - 430, http://dx.doi.org/10.1007/s11223-009-9139-y
2009
Khelifa M; Oudjene M; Khennane A, 2007, 'Fracture in sheet metal forming: effect of ductile damage evolution', Computers and Structures, vol. 85, pp. 205 - 212, http://dx.doi.org/10.1016/j.compstruc.2006.08.053
2007
Mai-duy N; Khennane A; Tran-Cong T, 2007, 'Computation of Laminated Composites Using Integrated Radial Basis Function Networks', CMC, Computers, Materials and Continua, vol. 5, pp. 63 - 78
2007
Khennane A; Sadaoui A; Kaci S, 2007, 'Behaviour of reinforced concrete frames in a fire environment including transitional thermal creep', Australian Journal of Structural Engineering, vol. 7, pp. 167 - 184, http://dx.doi.org/10.1080/13287982.2007.11464974
2007
Sadaoui A; Kaci S; Khennane A, 2007, 'Nonlinear Analysis of Reinforced Concrete Frames in a Fire Environment', Australian Journal of Structural Engineering, vol. 7, pp. 167 - 184
2007
Khelifa M; Oudjene M; Khennane A, 2007, 'Fracture in sheet metal forming: Effect of ductile damage evolution', Computers and Structures, vol. 85, pp. 205 - 212, http://dx.doi.org/10.1016/j.compstruc.2006.08.053
2007
Springolo M; Khennane A; Van Erp G, 2006, 'Design and analysis of a composite beam for infrastructure applications - Part III: Experimental results and non-linear FE analysis', International Journal of Materials and Product Technology, vol. 25, pp. 331 - 346, http://dx.doi.org/10.1504/IJMPT.2006.008887
2006
Springolo M; Van Erp G; Khennane A, 2006, 'Design and analysis of a composite beam for infrastructure applications - Part I: Preliminary investigation in bending', International Journal of Materials and Product Technology, vol. 25, pp. 297 - 312, http://dx.doi.org/10.1504/IJMPT.2006.008885
2006
Springolo M; Khennane A; van Erp G, 2006, 'Design and analysis of a composite beam for infrastructure applications. Part I: Preliminary investigation in bending', International Journal of Materials and Product Technology, vol. 25, pp. 331 - 346
2006
Springolo M; Van Erp G; Khennane A, 2006, 'Design and analysis of a composite beam for infrastructure applications - Part II: Preliminary investigation in shear and torsion', International Journal of Materials and Product Technology, vol. 25, pp. 313 - 330, http://dx.doi.org/10.1504/IJMPT.2006.008886
2006
Khennane A, 2005, 'Performance design of reinforced concrete slabs using commercial finite element software', Structural Concrete, vol. 6, pp. 141 - 147, http://dx.doi.org/10.1680/stco.2005.6.4.141
2005
Khennane A, 2005, 'Performance based design of reinforced concrete with professional finite element software', Journal of the International Federation of Concrete (FIB), vol. 6, pp. 141 - 147
2005
Khennane A; Melchers R, 2005, 'A micromechanics model for environmental stress-corrosion in GFRP', International Journal of Materials and Product Technology, vol. 19, pp. 1535 - 1542, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000179505800171&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a
2005
Khennane A; Melchers R, 2003, 'Durability of Glass Polymer Composites Subject to Stress Corrosion', ASCE journal of composites for construction, vol. 7, pp. 109 - 117, http://dx.doi.org/10.1061/(ASCE)1090-0268(2003)7:2(109)
2003
Khennane A; Melchers RE, 2003, 'A micromechanics model for environmental stress corrosion in GFRP', International Journal of Materials and Product Technology, vol. 19, pp. 2 - 14, http://dx.doi.org/10.1504/IJMPT.2003.003556
2003
Kaci S; Khennane A, 1997, 'Temperature effects on the creep and dynamic behaviors of Kevlar prestressing cables', Canadian Journal of Civil Engineering, vol. 24, pp. 431 - 437, http://dx.doi.org/10.1139/l96-124
1997
Khennane A; Baker G, 1993, 'Uniaxial model for concrete under variable temperature and stress', Journal of Engineering Mechanics, vol. 119, pp. 1507 - 1525, http://dx.doi.org/10.1061/(ASCE)0733-9399(1993)119:8(1507)
1993
Khennane A; Baker G, 1992, 'Plasticity models for the biaxial behaviour of concrete at elevated temperatures, Part I: Failure criterion', Computer Methods in Applied Mechanics and Engineering, vol. 100, pp. 207 - 223, http://dx.doi.org/10.1016/0045-7825(92)90183-K
1992
KHENNANE A; BAKER G, 1992, 'THERMOPLASTICITY MODEL FOR CONCRETE UNDER TRANSIENT TEMPERATURE AND BIAXIAL STRESS', PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, vol. 439, pp. 59 - 80, http://dx.doi.org/10.1098/rspa.1992.0134
1992
Khennane A; Baker G, 1992, 'Plasticity models for the biaxial behaviour of concrete at elevated temperatures, Part II: Implementation and simulation tests', Computer Methods in Applied Mechanics and Engineering, vol. 100, pp. 225 - 248, http://dx.doi.org/10.1016/0045-7825(92)90184-L
1992

Bio-cementitious materials, Composite materials, Hybrid structures, Computational mechanics 

Organisational units
lensSchool of Engineering & Information Technology
Sub Theme
lensAdvanced Materials & Impact Dynamics
lensSustainable Infrastructure
lensResilient Infrastructure