Journal articles

Ashraf M; Gardner L; Nethercot DA, 2006, 'Compression strength of stainless steel cross-sections', Journal of Constructional Steel Research, vol. 62, pp. 105 - 115, http://dx.doi.org/10.1016/j.jcsr.2005.04.010

Gardner L; Ashraf M, 2006, 'Structural design for nonlinear metallic materials', Engineering Structures, vol. 28, pp. 926 - 934, http://dx.doi.org/10.1016/j.engstruct.2005.11.001

Ashraf M; Gardner L; Nethercot DA, 2006, 'Finite element modelling of structural stainless steel cross-sections', Thin-Walled Structures, vol. 44, pp. 1048 - 1062, http://dx.doi.org/10.1016/j.tws.2006.10.010

Ashraf M; Gardner L; Nethercot DA, 2005, 'Strength enhancement of the corner regions of stainless steel cross-sections', Journal of Constructional Steel Research, vol. 61, pp. 37 - 52, http://dx.doi.org/10.1016/j.jcsr.2004.06.001

Ashraf M; Nethercot DA; Gardner L, 2005, 'Structural stainless steel design: project', The Structural Engineer, vol. 83, pp. 28 - 29

Ashraf M; Nethercot DA; Ahmed B, 2004, 'Sway of semi-rigid steel frames - Part 1: regular frames', Engineering Structures, vol. 26, pp. 1809 - 1819, http://dx.doi.org/10.1016/j.engstruct.2004.06.018

Ashraf M; Nethercot DA; Ahmed B, 2004, 'Sway of semi-rigid steel frames - Part 1: Regular frames', Steel and Composite Structures, vol. 4, pp. 403 - 418, http://dx.doi.org/10.12989/scs.2004.4.5.403

Ashraf M; Nethercot DA; Ahmed B, 2004, 'A simplified method to predict sway of rigid multi-storey steel frames', Steel and Composite Structures, vol. 4, pp. 317 - 331, http://dx.doi.org/10.12989/scs.2004.4.4.317

Conference Papers

Li X; Ashraf M; Subhani M; Kremer P, 2019, 'Experimental investigation and numerical modelling of mechanical properties of clts', in Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications - Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation, 2019, pp. 1725 - 1730, http://dx.doi.org/10.1201/9780429426506-298

Ameri AAH; Escobedo-Diaz JP; Quadir MZ; Brown A; Ashraf M; Hazell P, 2018, 'The effect of loading direction on the dynamic damage in lean duplex stainless steel 2101', in AIP Conference Proceedings, http://dx.doi.org/10.1063/1.5044811

Ameri AAH; Escobedo-Diaz JP; Quadir MZ; Ashraf M; Hutchison W, 2018, 'Strain rate effect on the mechanical response of duplex stainless steel', in AIP Conference Proceedings, http://dx.doi.org/10.1063/1.5044810

shill S; Al-Deen S; ashraf M, 2017, 'Thermal and Chemical Degradation of Portland Cement Concrete in the Military Airbase', in Thermal and Chemical Degradation of Portland Cement Concrete in the Military Airbase, 22nd International Conference on Advancement of Construction Management and Real Estate, Melbourne, Australia, presented at 22nd International Conference on Advancement of Construction Management and Real Estate, Melbourne, Australia, 20 November 2017 - 23 November 2017

Al-Deen S; Duane BW; Shill SK; Ashraf M, 2017, 'Durability Issues of Military Airfield Rigid Pavements due to Combined Influence of Chemical Oil Spills and Repeated Thermal Shocks from Jet Fighter Exhaust', in Procedings of 28th Biennial National Conference of the Concrete Institute of Australia and 3rd International Congress on Durability of Concrete, 28th Biennial National Conference of the Concrete Institute of Australia, Adelaide, Australia, presented at 28th Biennial National Conference of the Concrete Institute of Australia, Adelaide, Australia, 23 October 2017 - 26 October 2017

Ameri AA; Escobedo-Diaz JP; Ashraf M; Quadir MZ, 2017, 'Investigating the Anisotropic Behaviour of Lean Duplex Stainless Steel 2101', in Characterization of Minerals, Metals, and Materials 2017, San Diego, pp. 181 - 190, presented at TMS 2017, San Diego, 26 February 2017 - 02 March 2017, http://dx.doi.org/10.1007/978-3-319-51382-9_20

Ameri AA; Elewa NN; Ashraf M; Escobedo-Diaz JP; Hazell PJ, 2017, 'Estimation of Dislocation Density in Metals from Hardness Measurements', in Characterization of Minerals, Metals, and Materials 2017, USA,San Diego, pp. 441 - 449, presented at TMS, USA,San Diego, 26 February 2017 - 02 March 2017, http://dx.doi.org/10.1007/978-3-319-51382-9_48

Ahmed S; Anwar-Us-Saadat M; Ashraf M, 2017, 'Buckling resistance of stainless steel welded L-columns', in 6th International Conference on Engineering Mechanics and Materials 2017, pp. 176 - 184

Anwar-Us-Saadat M; Ashraf M, 2017, 'Effect of geometric imperfection and residual stress on the finite element modelling of stainless steel I-sections subjected to lateral-torsional buckling', in 6th International Conference on Engineering Mechanics and Materials 2017, pp. 356 - 364

Mendis ASM; Al-Deen S; Ashraf M, 2017, 'An Experimental Study on Flexural and Shear Behaviour of Reinforced Crumbed Rubber Concrete (CRC) Beams', in Procedings of 28th Biennial National Conference of the Concrete Institute of Australia and 3rd International Congress on Durability of Concrete, 28th Biennial National Conference of the Concrete Institute of Australia, Adelaide, Australia, presented at 28th Biennial National Conference of the Concrete Institute of Australia, Adelaide, Australia, 23 October 2017 - 26 October 2017

Rashed MG; Ashraf M; Hazell P, 2016, 'Manufacturing Issues and the Resulting Complexity in Modeling of Additively Manufactured Metallic Microlattices', in Applied Mechanics and Materials, Trans Tech Publications, Tianjin, China, presented at 2016 International Symposium on Structural Integrity, Tianjin, China, 26 May 2016 - 30 May 2016, http://dx.doi.org/10.4028/www.scientific.net/AMM.853.394

Anwar-Us-Saadat M; Ahmed SA; Ashraf M, 2015, 'Behaviour of Stainless Steel Lipped channel Sections Subjected to Eccentric Compression', in Saha SS; Llyod NL; Yazdani SY; Singh AS (eds.), Implementing Innovative Ideas in Structural Engineering and Project Management, ISEC Press, Sydney, Australia, pp. 131 - 136, presented at The Eighth International Structural Engineering and Construction Conference, Sydney, Australia, 23 November 2015 - 28 November 2015

Ahmed S; Ashraf M, 2015, 'COMPRESSION CAPACITY OF SLENDER STAINLESS STEEL CROSS-SECTIONS', in Saha S; Zhang YX; Yazdani S; Singh A (eds.), Implementing Innovative Ideas in Structural Engineering and Project Management, Sydney, Australia, pp. 119 - 124, presented at The Eighth International Structural Engineering and Construction Conference, Sydney, Australia, 23 November 2015 - 28 November 2015, http://dx.doi.org/10.14455/ISEC.res.2015.156

Rashed MG; Ashraf M; Hazell PJ, 2015, 'Failure Mechanisms of Metallic Ultra-Light Microlattice Structures Subjected To Dynamic Loading', in Proceeding of the Eighth International Conference on Advances in Steel Structures (ICASS 2015), Eighth International Conference on Advances in Steel Structures (ICASS 2015), Lisbon, Portugal, presented at Eighth International Conference on Advances in Steel Structures (ICASS 2015), Lisbon, Portugal, 22 July 2015 - 24 July 2015

Rashed MG; Ashraf M; Hazell PJ, 2015, 'Evaluation of Rate-Dependent Plasticity Models in Numerical Simulation of Metallic Light-Weight Microlattice Materials', in Proceeding of the Eighth International Conference on Advances in Steel Structures (ICASS 2015), Eighth International Conference on Advances in Steel Structures (ICASS 2015), Lisbon, Portugal, presented at Eighth International Conference on Advances in Steel Structures (ICASS 2015), Lisbon, Portugal, 22 July 2015 - 24 July 2015

Ahmed S; Ashraf M; Al-Deen S, 2015, 'EMPIRICAL BUCKLING CURVES FOR WELDED I-SECTION COLUMNS PRODUCED FROM STAINLESS STEEL', in Proceeding of the Eighth International Conference on Advances in Steel Structures (ICASS 2015), Eighth International Conference on Advances in Steel Structures (ICASS 2015), Lisbon, Portugal, presented at Eighth International Conference on Advances in Steel Structures (ICASS 2015), Lisbon, Portugal, 22 July 2015 - 24 July 2015

Anwar-us-Saadat M; Ashraf M; Ahmed S; Al-Deen S, 2015, 'NUMERICAL INVESTIGATION OF STAINLESS STEEL SLENDER SECTIONS SUBJECTED TO COMBINED LOADING', in Proceeding of the Eighth International Conference on Advances in Steel Structures (ICASS 2015), Eighth International Conference on Advances in Steel Structures (ICASS 2015), Lisbon, Prtugal, presented at Eighth International Conference on Advances in Steel Structures (ICASS 2015), Lisbon, Prtugal, 22 July 2015 - 24 July 2015

Fenercioglu I; Zaloglu B; Ashraf MA; Young J; Lai JCS; Platzer MF, 2015, 'Flow around an oscillating tandem-wing power generator', in AIAA SciTech, AIAA, Kissimmee, Florida, USA, presented at AIAA SciTech 53rd Aerospace Sciences Meeting, Kissimmee, Florida, USA, 05 January 2015 - 09 January 2015, http://dx.doi.org/10.2514/6.2015-1751

Ashraf M; Anwar-us-Saadat M, 2014, 'BEAM-COLUMN INTERACTIONS IN STAINLESS STEEL MEMBERS', in Paik JK; Kim SJ; Song CH (eds.), Proceedings of the 7th International Conference on Thin-Walled Structures, 7th International Conference on Thin-Walled Structures, Pusan, Korea, presented at 7th International Conference on Thin-Walled Structures, Pusan, Korea, 28 September 2014 - 02 October 2014

Zaman RI; Lai JCS; Young J; Ashraf MA, 2014, 'Comparison Study of Non-Sinusoidal Pitch over Sinusoidal Pitch at Higher Angle of Attack', in AIAA (ed.), 32nd AIAA Applied Aerodynamics Conference, AIAA, Georgia, Atlanta, USA, presented at 32nd AIAA Applied Aerodynamics Conference, Georgia, Atlanta, USA, 16 June 2014 - 20 June 2014, http://dx.doi.org/10.2514/6.2014-2016

Rashed MG; Ashraf M; Hazell PJ, 2014, 'An Overview on the Structure and Applications of Metallic Microlattices', in Materials For A Lighter And Smarter World: 2014 Australian Composites Conference Proceedings, Composites Conference: Materials for a lighter and smarter world, Newcastle, Australia, presented at Composites Conference: Materials for a lighter and smarter world, Newcastle, Australia, 07 April 2014 - 09 April 2014

Usoh CO; Young J; Lai JCS; Ashraf MA, 2014, 'Effective angle of attack control of a flat plate flapping-foil turbine', in 32nd AIAA Applied Aerodynamics Conference

Fenercioglu I; Zaloglu B; Young J; Ashraf MA; Lai JCS; Platzer MF, 2014, 'Experimental and computational investigation of the flow through an oscillating-wing power generator', in 52nd AIAA Aerospace Sciences Meeting - AIAA Science and Technology Forum and Exposition, SciTech 2014

Fenercioglu I; Zaloglu B; Young J; Ashraf MA; Lai JCS; Platzer MF, 2014, 'Experimental and computational investigation of the flow through an oscillating-wing power generator', in 52nd Aerospace Sciences Meeting

Yu K; Morozov EV; Ashraf MA; Shankar K, 2014, 'Buckling behaviour of reinforced thermoplastic pipes under combined external pressure and bending', in 8th Australasian Congress on Applied Mechanics, ACAM 2014, as Part of Engineers Australia Convention 2014, pp. 87 - 94

Ashraf MA; Morozov EV; Falzon P; Shankar K, 2014, 'Liner Stability Analysis for HDPE lined Pipe under Bending', in Das R; John S (ed.), 8th Australasian Congress on Applied Mechanics, Engineers Australia, Melbourne, pp. 811 - 817, presented at 8th Australasian Congress on Applied Mechanics, Melbourne, 23 November 2014 - 26 November 2014

Rashed MG; Ashraf M; Hazell PJ, 2014, 'Numerical Simulation of Open Cell Metallic Microlattice Core Subjected To Dynamic Compression', in Paik JK; Kim SJ; Song CH (eds.), Proceedings of the ICTWS 2014 7th International Conference on Thin-Walled Structures, 7th International Conference on Thin-Walled Structures, Pusan, Korea, presented at 7th International Conference on Thin-Walled Structures, Pusan, Korea, 28 September 2014 - 02 October 2014

Eslami A; Ronagh H; Ashraf M, 2013, 'FLEXURAL STRENGTHENING OF CODE-COMPLIANT RC BEAM-COLUMN JOINTS USING CFRP', in Al-Mahaidi R (ed.), Proceedings of the 2013 Asia-Pacific Conference on FRP in Structures (APFIS 2013), Melbourne, Australia, presented at Asia Pacific Conference on FRP in Structures, Melbourne, Australia, 11 December 2013 - 13 November 2013

Behnam B; Ronagh H; Ashraf M, 2013, 'Performance of reinforced concrete structures in post-earthquake fire', in Research and Applications in Structural Engineering, Mechanics and Computation - Proceedings of the 5th International Conference on Structural Engineering, Mechanics and Computation, SEMC 2013, pp. 2027 - 2032

Ashraf M; Hossain MR, 2013, 'Passive energy dissipation characteristics of yielding shear panel device produced from steel and stainless steel', in Research and Applications in Structural Engineering, Mechanics and Computation - Proceedings of the 5th International Conference on Structural Engineering, Mechanics and Computation, SEMC 2013, pp. 301 - 305

Behnam B; Ronagh H; Ashraf M, 2013, 'Performance of reinforced concrete structures in post-earthquake fire', in Research and Applications in Structural Mechanics, Engineering and Computation, CRC Press, Cape Town, South Africa, pp. 727 - 728, presented at 5th International Conference on Structural Mechanics, Engineering and Computation, Cape Town, South Africa, 02 September 2013 - 04 September 2013

Ashraf M; Hossain MR, 2013, 'Passive energy dissipation characteristics of yielding shear panel device produced from steel and stainless steel', in Research and Apllications in Structural Engineering, Mechanics and Computation, CRC Press, Tylor and Francis Group, Cape Town, South Africa, pp. 111 - 112, presented at 5th International Conference on Structural Engineering, Mechanics and Computation, Cape Town, South Africa, 02 September 2013 - 04 September 2013

Zaman RI; Young J; Lai JCS; Ashraf MA, 2012, 'FLOW PERIODICITY ANALYSIS OF LOW REYNOLDS NUMBER FLAPPING AIRFOILS', in Proceedings of the Eighteenth Australasian Fluid Mechanics Conference, Australasian Fluid Mechanics Society, Launceston, TAS, pp. 1 - 4, presented at 18th Australasian Fluid Mechanics Conference, Launceston, Tasmania, 03 December 2012 - 07 December 2012, http://www.18afmc.com.au/

Usoh CO; Young J; Lai JCS; Ashraf MA, 2012, 'Numerical Analysis of a Non-Profiled Plate for Flapping Wing Turbines', in Proceedings of the Eighteenth Australasian Fluid Mechanics Conference, Australasian Fluid Mechanics Society, Launceston, TAS, pp. 1 - 4, presented at 18th Australasian Fluid Mechanics Conference, Launceston, Tasmania, 03 December 2012 - 07 December 2012, http://www.18afmc.com.au/

Lui WM; Young B; Ashraf M, 2012, 'Eccentric Compression Tests on High Strength Duplex Stainless Steel Columns', in Proceedings of the 14th International Symposium on Tubular Structures, Taylor & Francis, , London, UK, 431-438, pp. 431 - 438, presented at 14th International Symposium on Tubular Structures, , London, UK, 431-438, 12 September 2012 - 14 September 2012

Ashraf MA; Morozov EV; Shankar K, 2012, 'Flexure analysis of composite pipes during reeling process', in Advances in Applied Mechanics Research, Conference Proceedings - 7th Australasian Congress on Applied Mechanics, ACAM 2012, pp. 250 - 258

Ashraf M; Hossain MR; Griffiths A, 2012, 'A Framework for Infrastructure Sustainability Assessment', in Proceedings of the 10th International Conference on Advances on Steel Concrete Composite and Hybrid Structures, Research Publishing Services, Singapore, presented at 10th International Conference on Advances on Steel Concrete Composite and Hybrid Structures, Singapore, 02 July 2012 - 04 July 2012, http://dx.doi.org/10.3850/978-981-07-2615-7_283

Hossain MR; Ashraf M, 2012, 'Mathematical modelling for the hysteretic response of yielding shear panel device', in Proceedings of 7th International Conference on Advances in Steel Structures, Southeast University Press, China, pp. 1468 - 1475, presented at 7th International Conference on Advances in Steel Structures, Nanjing, China, 14 April 2012 - 16 April 2012

Saeed N; Ronagh H; Virk A; Ashraf M, 2012, 'Investigating the effects of pipe live pressure on the design of composite', in Proceedings of The Australasian Structural Engineering Conference, Australasian Structural Engineering Conference, Perth, Western Australia, pp. 1 - 9, presented at Australasian Structural Engineering Conference, Perth, Western Australia, 11 July 2012 - 13 July 2012

Hossain MR; Ashraf M; Padgett J, 2012, 'Probabilistic seismic performance evaluation of yielding shear panel device', in Proceedings of The Australasian Structural Engineering Conference, Australasian Structural Engineering Conference, Perth, Western Australia, pp. 1 - 8, presented at Australasian Structural Engineering Conference, Perth, Western Australia, 11 July 2012 - 13 July 2012

Hossain MR; Ashraf M; Albermani F, 2011, 'Theoretical evaluation of yielding shear panel device for passive energy dissipation', in ECCOMAS Thematic Conference - COMPDYN 2011: 3rd International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering: An IACM Special Interest Conference, Programme

Hossain MR; Ashraf M; Albermani F, 2011, 'Finite element modelling of yielding shear panel device for passive energy dissipation', in ECCOMAS Thematic Conference - COMPDYN 2011: 3rd International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering: An IACM Special Interest Conference, Programme

Showing 51 - 100 of 120 publications
Previous
1
2
3
Next