Dr Amar Khennane

Post graduate Research Coordinator
School of Engineering and Information Technology
+61 2 6268 8274
+61 2 6268 8581

LOCATION

Building 20 Room 131
School of Engineering and Information Technology, The University of New South Wales, Australian Defence Force Academy, PO Box 7916, Canberra BC ACT 2610, AUSTRALIA

  • ABOUT
  • PUBLICATIONS

Research Experience
 

  • Bio-Cementitious materials
  • Composite materials
  • Timber
  • Reinforced concrete
  • Hybrid Structure
  • Publications - Books: 2,  Peer-reviewed Journal papers: 47, Conference Papers: 33 Other: 6

Teaching Experience

Structural Analysis

Finite Element Method

Reinforced Concrete

Stress/Strain Analysis

http://au.mathworks.com/support/books/book118765.html

Additional Experience
 

  • Maitre de Conferences (Tizi-Ouzou, Algeria)
  • Research Associate (Newcastle, Australia)
  • Lecturer/Senior Lecturer (USQ, Australia)

 

Books

Khennane A, 2013, Introduction to Finite Element Analysis Using MATLAB® and Abaqus, CRC Press (Taylord and Francis Group), Boca Raton Florida, USA, http://dx.doi.org/10.1201/b15042

Khennane A, 2013, Introduction to Finite Element Analysis Using MATLAB (R) and Abaqus Preface, CRC PRESS-TAYLOR & FRANCIS GROUP, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000355629000001&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a

Khennane A, 2013, Introduction to Finite Element Analysis Using MATLAB (R) and Abaqus Introduction, CRC PRESS-TAYLOR & FRANCIS GROUP, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000355629000002&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a

Book Chapters

Khennane A, 2013, 'Bar Element', in INTRODUCTION TO FINITE ELEMENT ANALYSIS USING MATLAB(R) AND ABAQUS, CRC PRESS-TAYLOR & FRANCIS GROUP, pp. 5 - 61, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000355629000003&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a

Khennane A, 2013, 'Axisymmetric Problems', in INTRODUCTION TO FINITE ELEMENT ANALYSIS USING MATLAB(R) AND ABAQUS, CRC PRESS-TAYLOR & FRANCIS GROUP, pp. 353 - 377, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000355629000011&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a

Khennane A, 2013, 'Weighted Residual Methods', in INTRODUCTION TO FINITE ELEMENT ANALYSIS USING MATLAB(R) AND ABAQUS, CRC PRESS-TAYLOR & FRANCIS GROUP, pp. 175 - 189, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000355629000007&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a

Khennane A, 2013, 'Stress and Strain Analysis', in INTRODUCTION TO FINITE ELEMENT ANALYSIS USING MATLAB(R) AND ABAQUS, CRC PRESS-TAYLOR & FRANCIS GROUP, pp. 135 - 174, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000355629000006&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a

Khennane A, 2013, 'Plane Problems', in INTRODUCTION TO FINITE ELEMENT ANALYSIS USING MATLAB(R) AND ABAQUS, CRC PRESS-TAYLOR & FRANCIS GROUP, pp. 231 - 351, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000355629000010&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a

Khennane A, 2013, 'Numerical Integration', in INTRODUCTION TO FINITE ELEMENT ANALYSIS USING MATLAB(R) AND ABAQUS, CRC PRESS-TAYLOR & FRANCIS GROUP, pp. 211 - 230, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000355629000009&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a

Khennane A, 2013, 'Finite Element Approximation', in INTRODUCTION TO FINITE ELEMENT ANALYSIS USING MATLAB(R) AND ABAQUS, CRC PRESS-TAYLOR & FRANCIS GROUP, pp. 191 - 210, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000355629000008&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a

Khennane A, 2013, 'Rigid Jointed Frames', in INTRODUCTION TO FINITE ELEMENT ANALYSIS USING MATLAB(R) AND ABAQUS, CRC PRESS-TAYLOR & FRANCIS GROUP, pp. 107 - 134, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000355629000005&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a

Khennane A, 2013, 'Beam Element', in INTRODUCTION TO FINITE ELEMENT ANALYSIS USING MATLAB(R) AND ABAQUS, CRC PRESS-TAYLOR & FRANCIS GROUP, pp. 63 - 105, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000355629000004&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a

Khennane A, 2013, 'Thin and Thick Plates', in INTRODUCTION TO FINITE ELEMENT ANALYSIS USING MATLAB(R) AND ABAQUS, CRC PRESS-TAYLOR & FRANCIS GROUP, pp. 379 - 418, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000355629000012&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a

Khennane A, 2013, 'Filament winding processes in the manufacture of advanced fibre-reinforced polymer (FRP) composites', in Advanced Fibre-Reinforced Polymer (FRP) Composites for Structural Applications, pp. 187 - 206, http://dx.doi.org/10.1533/9780857098641.2.187

Journal articles

Illouli S; Sadaoui A; Khennane A, 2019, 'Application of the theory statically indeterminate structures of infinite degree to a cable-truss footbridge under lateral forces', Engineering Structures, vol. 188, pp. 665 - 676, http://dx.doi.org/10.1016/j.engstruct.2019.03.063

Li M; Khelifa M; Khennane A; El Ganaoui M, 2019, 'Structural response of cement-bonded wood composite panels as permanent formwork', Composite Structures, vol. 209, pp. 13 - 22, http://dx.doi.org/10.1016/j.compstruct.2018.10.079

Li Z; Khennane A; Hazell PJ; Remennikov AM, 2018, 'Performance of a hybrid GFRP-concrete beam subject to low-velocity impacts', Composite Structures, vol. 206, pp. 425 - 438, http://dx.doi.org/10.1016/j.compstruct.2018.08.036

Li M; Khennane A; Brandelet B; El Ganaoui M; Khelifa M; Rogaume Y, 2018, 'Modelling of heat transfer through permanent formwork panels exposed to high temperatures', Construction and Building Materials, vol. 185, pp. 166 - 174, http://dx.doi.org/10.1016/j.conbuildmat.2018.07.052

Tekle BH; Khennane A; Kayali O, 2017, 'Bond behaviour of GFRP reinforced geopolymer cement concrete', MATEC Web of Conferences, vol. 120, http://dx.doi.org/10.1051/matecconf/201712004002

Tekle BH; Khennane A; Kayali O, 2017, 'Bond behaviour of GFRP reinforcement in alkali activated cement concrete', Construction and Building Materials, vol. 154, pp. 972 - 972, http://dx.doi.org/10.1016/j.conbuildmat.2017.08.029

Tekle BH; Khennane A; Kayali O, 2017, 'Bond of spliced GFRP reinforcement bars in alkali activated cement concrete', Engineering Structures, vol. 147, pp. 740 - 751, http://dx.doi.org/10.1016/j.engstruct.2017.06.040

Li Z; Khennane A; Hazell PJ; Brown AD, 2017, 'Impact behaviour of pultruded GFRP composites under low-velocity impact loading', Composite Structures, vol. 168, pp. 360 - 371, http://dx.doi.org/10.1016/j.compstruct.2017.02.073

Sadaoui A; Lattari K; Khennane A, 2017, 'Effects of temperature changes on the behaviour of a cable truss system', Journal of Constructional Steel Research, vol. 129, pp. 111 - 118, http://dx.doi.org/10.1016/j.jcsr.2016.11.013

Tekle BH; Khennane A; Kayali O, 2016, 'Bond properties of sand-coated GFRP bars with fly ash-based geopolymer concrete', Journal of Composites for Construction, vol. 20, http://dx.doi.org/10.1061/(ASCE)CC.1943-5614.0000685

Khennane A; Kayali O; Junaid MT, 2016, 'Response of alkali activated low calcium fly-ash based geopolymer concrete under compressive load at elevated temperatures', Materials and Structures (2017) 50:50, vol. 50, http://dx.doi.org/10.1617/s11527-016-0877-6

Yu YUGUO; Khennane A; Zhang Y, 2016, 'Numerical modelling of degradation of cement paste under external sulfate attack', Applied Mechanics and Materials, vol. 846, pp. 127 - 132, http://dx.doi.org/10.4028/www.scientific.net/AMM.846.127

Sadaoui A; Lattari K; Khennane A, 2016, 'A novel analytical method for the analysis of a bi-concave cable-truss footbridge', Engineering Structures, vol. 123, pp. 97 - 107, http://dx.doi.org/10.1016/j.engstruct.2016.05.025

Khelifa M; Khennane A; El Ganaoui M; Celzard A, 2016, 'Numerical damage prediction in dowel connections of wooden structures', Materials and Structures/Materiaux et Constructions, vol. 49, pp. 1829 - 1840, http://dx.doi.org/10.1617/s11527-015-0615-5

Khennane A; Khelifa M; El Ganaoui M, 2015, 'Numerical modelling of 3D dowelled timber joints using advanced fully coupled hydro-mechanical constitutive equations', Mechanics & Industry, vol. 16, pp. 501 - 501, http://dx.doi.org/10.1051/meca/2015034

Junaid MT; Khennane A; Kayali O, 2015, 'Performance of fly ash based geopolymer concrete made using non-pelletized fly ash aggregates after exposure to high temperatures', Materials and Structures/Materiaux et Constructions, vol. 48, pp. 3357 - 3365, http://dx.doi.org/10.1617/s11527-014-0404-6

Khelifa M; Khennane A; El Ganaoui M; Celzard A, 2015, 'Erratum to: Numerical damage prediction in dowel connections of wooden structures (Materials and Structures, DOI: 10.1617/s11527-015-0615-5)', Materials and Structures/Materiaux et Constructions, vol. 49, pp. 1841 - 1842, http://dx.doi.org/10.1617/s11527-015-0679-2

Yu Y; Zhang YX; Khennane A, 2015, 'Numerical modelling of degradation of cement-based materials under leaching and external sulfate attack', Computers and Structures, vol. 158, pp. 1 - 14, http://dx.doi.org/10.1016/j.compstruc.2015.05.030

Junaid MT; Kayali O; Khennane A; Black J, 2015, 'A mix design procedure for low calcium alkali activated fly ash-based concretes', Construction and Building Materials, vol. 79, pp. 301 - 310, http://dx.doi.org/10.1016/j.conbuildmat.2015.01.048

Ferdous W; Manalo A; Khennane A; Kayali O, 2015, 'Geopolymer concrete-filled pultruded composite beams - Concrete mix design and application', Cement and Concrete Composites, vol. 58, pp. 1 - 13, http://dx.doi.org/10.1016/j.cemconcomp.2014.12.012

Chakrabortty A; Khennane A, 2014, 'l Failure mechanisms of hybrid FRP-concrete beams with external filament-wound wrapping', ADVANCES IN CONCRETE CONSTRUCTION, vol. 2, pp. 57 - 75, http://dx.doi.org/10.12989/acc.2014.2.1.057

Khelifa M; Khennane A; El Ganaoui M; Rogaume Y, 2014, 'Analysis of the behavior of multiple dowel timber connections in fire', Fire Safety Journal, vol. 68, pp. 119 - 128, http://dx.doi.org/10.1016/j.firesaf.2014.05.024

Junaid MT; Khennane A; Kayali O; Sadaoui A; Picard D; Fafard M, 2014, 'Aspects of the deformational behaviour of alkali activated fly ash concrete at elevated temperatures', Cement and Concrete Research, vol. 60, pp. 24 - 29, http://dx.doi.org/10.1016/j.cemconres.2014.01.026

Khelifa M; Khennane A, 2014, 'Numerical analysis of the cutting forces in timber', Journal of Engineering Mechanics, vol. 140, pp. 523 - 530, http://dx.doi.org/10.1061/(ASCE)EM.1943-7889.0000671

Khelifa M; Vila Loperena N; Bleron L; Khennane A, 2014, 'Analysis of CFRP-strengthened timber beams', Journal of Adhesion Science and Technology, vol. 28, pp. 1 - 14, http://dx.doi.org/10.1080/01694243.2013.815096

Khennane A; Khelifa M; Bleron L; Viguier J, 2014, 'Numerical modelling of ductile damage evolution in tensile and bending tests of timber structures', Mechanics of Materials, vol. 68, pp. 228 - 236, http://dx.doi.org/10.1016/j.mechmat.2013.09.004

Islam S; Khennane A, 2013, 'Computer Aided Design of RC Structures', International Journal of Concrete Structures and Materials, vol. 7, pp. 127 - 133, http://dx.doi.org/10.1007/s40069-012-0027-7

Sadaoui A; Khennane A, 2012, 'Effect of Transient Creep on Behavior of Reinforced Concrete Beams in Fire', ACI Materials Journal, vol. 109, pp. 606 - 616, http://dx.doi.org/10.14359/51684158

Chakrabortty A; Khennane A; Kayali O; Morozov EV, 2011, 'Performance of outside filament-wound hybrid FRP-concrete beams', Composites Part B - Engineering, vol. 42, pp. 907 - 915, http://dx.doi.org/10.1016/j.compositesb.2011.01.003

Dahmani L; Khennane A; Kaci S, 2010, 'Crack identification in reinforced concrete beams using ANSYS software', Strength of Materials, vol. 42, pp. 232 - 240, http://dx.doi.org/10.1007/s11223-010-9212-6

Khennane A, 2010, 'Manufacture and testing of a hybrid beam using a pultruded profile and high strength concrete', Australian Journal of Structural Engineering, vol. 10, pp. 145 - 156, http://dx.doi.org/10.1080/13287982.2010.11465040

Dahmani L; Khennane A; Kaci S, 2009, 'Modeling and influence of shear retention parameter on the response of reinforced concrete structural elements', Strength of Materials, vol. 41, pp. 423 - 430, http://dx.doi.org/10.1007/s11223-009-9139-y

Sadaoui A; Khennane A, 2009, 'Effect of transient creep on the behaviour of reinforced concrete columns in fire', Engineering Structures, vol. 31, pp. 2203 - 2208, http://dx.doi.org/10.1016/j.engstruct.2009.04.005

Khelifa M; Oudjene M; Khennane A, 2007, 'Fracture in sheet metal forming: effect of ductile damage evolution', Computers and Structures, vol. 85, pp. 205 - 212, http://dx.doi.org/10.1016/j.compstruc.2006.08.053

Khelifa M; Oudjene M; Khennane A, 2007, 'Fracture in sheet metal forming: Effect of ductile damage evolution', Computers and Structures, vol. 85, pp. 205 - 212, http://dx.doi.org/10.1016/j.compstruc.2006.08.053

Mai-duy N; Khennane A; Tran-Cong T, 2007, 'Computation of Laminated Composites Using Integrated Radial Basis Function Networks', CMC, Computers, Materials and Continua, vol. 5, pp. 63 - 78