Dr Krishna Shankar

Senior Lecturer in Aero/Mech Engineering
School of Engineering and Information Technology
+61 2 6268 8584
+61 2 6268 8581

LOCATION

Room 364, Building 21
School of Engineering and Information Technology, The University of New South Wales, Australian Defence Force Academy, PO Box 7916, Canberra BC ACT 2610, AUSTRALIA

  • ABOUT
  • PUBLICATIONS

Research Interests

  • Structural Health Monitoring, Vibration Analysis
  • Testing and Analysis of Advanced Composites Materials
  • Impact Mechanics of Polymeric Foams, Composite Laminates and Sandwich Structures
  • Vibration and Dynamic Response of Structures
  • Finite Element Simulation
  • Fracture Mechanics
  • Biomechanical Testing and Modelling
  • Fatigue and corrosion of mechanically fastened joints, Corrosion Fatigue

Publications (as of May 2018)

Refereed Journal papers: 77, Conferences: 120

Teaching Experience

  • Engineering Structures, Structural Mechanics
  • Non Destructive Inspection
  • Structural Integrity Assessment
  • Fatigue and Fracture Mechanics
  • Composite Mechanics

Additional Experience

  • Four Years Aircraft Design experience as Stress Analyst in Design Bureau, HAL, Bangalore
  • Six years of post doctoral research experience at University of Toronto and National Research Council of Canada in Composite structural analysis and testing
  • Twenty three years of Academic Teaching in UNSW Canberra

Consulting Interests

Mechanical Testing, Material Characterisation, Impact Testing and Simulation, Non Destructive Inspection, Finite Element Modelling

Journal articles

Ramakrishnan KR; Wang H; Shankar K; Fien A, 2018, 'A new method for the measurement and analysis of biomechanical energy delivered by kicking', Sports Engineering, vol. 21, pp. 53 - 62, 10.1007/s12283-017-0244-z

Wang C; Sun M; Shankar K; Xing S; Zhang L, 2018, 'CFD simulation of vortex induced vibration for frp composite riser with different modeling methods', Applied Sciences (Switzerland), vol. 8, 10.3390/app8050684

Morozov E, 2018, 'Vibration-based assessment of delaminations in FRP composite plates', Composites Part B: Engineering, vol. 144, pp. 254 - 266, 10.1016/j.compositesb.2018.03.003

Wang C; Shankar K; Morozov EV, 2017, 'Global design and analysis of deep sea FRP composite risers under combined environmental loads', Advanced Composite Materials, vol. 26, pp. 79 - 98, 10.1080/09243046.2015.1052187

Wang H; Hazell PJ; Shankar K; Morozov EV; Escobedo JP, 2017, 'Impact behaviour of Dyneema® fabric-reinforced composites with different resin matrices', Polymer Testing, vol. 61, pp. 17 - 26, 10.1016/j.polymertesting.2017.04.026

Zhang Z; Zhan C; Shankar K; Morozov EV; Singh HK; Ray T, 2017, 'Sensitivity analysis of inverse algorithms for damage detection in composites', Composite Structures, vol. 176, pp. 844 - 859, 10.1016/j.compstruct.2017.06.019

Wang H; Hazell PJ; Shankar K; Morozov EV; Escobedo JP; Wang C, 2017, 'Effects of fabric folding and thickness on the impact behaviour of multi-ply UHMWPE woven fabrics', Journal of Materials Science, vol. 52, pp. 13977 - 13991, 10.1007/s10853-017-1482-y

Yu K; Morozov EV; Ashraf MA; Shankar K, 2017, 'A review of the design and analysis of reinforced thermoplastic pipes for offshore applications', Journal of Reinforced Plastics and Composites, vol. 36, pp. 1514 - 1530, 10.1177/0731684417713666

Zhang Z; Shankar K; Morozov EV; Tahtali M, 2016, 'Vibration-based delamination detection in composite beams through frequency changes', JVC/Journal of Vibration and Control, vol. 22, pp. 496 - 512, 10.1177/1077546314533584

Wang C; Shankar K; Ashraf MA; Morozov EV; Ray T, 2016, 'Surrogate-assisted optimisation design of composite riser', Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, vol. 230, pp. 18 - 34, 10.1177/1464420714539304

Wang H; Ramakrishnan KR; Shankar K, 2016, 'Experimental study of the medium velocity impact response of sandwich panels with different cores', Materials and Design, vol. 99, pp. 68 - 82, 10.1016/j.matdes.2016.03.048

Wang C; Shankar K; Morozov EV, 2016, 'Tailored design of top-tensioned composite risers for deep-water applications using three different approaches', Advances in Mechanical Engineering, vol. 9, 10.1177/1687814016684271

Yu K; Morozov EV; Ashraf MA; Shankar K, 2015, 'Numerical analysis of the mechanical behaviour of reinforced thermoplastic pipes under combined external pressure and bending', Composite Structures, vol. 131, pp. 453 - 461, 10.1016/j.compstruct.2015.05.033

Mostafa A; Shankar K; Morozov EV, 2015, 'Independent analytical technique for analysis of the flexural behaviour of the composite sandwich panels incorporated with shear keys concept', Materials and Structures/Materiaux et Constructions, vol. 48, pp. 2455 - 2474, 10.1617/s11527-014-0331-6

Ihesiulor OK; Shankar K; Zhang Z; Ray T, 2014, 'Delamination detection with error and noise polluted natural frequencies using computational intelligence concepts', Composites Part B: Engineering, vol. 56, pp. 906 - 925, 10.1016/j.compositesb.2013.09.032

Sayem Uddin M; Morozov EV; Shankar K, 2014, 'The effect of filament winding mosaic pattern on the stress state of filament wound composite flywheel disk', Composite Structures, vol. 107, pp. 260 - 275, 10.1016/j.compstruct.2013.07.004

Ramakrishnan KR; Guérard S; Viot P; Shankar K, 2014, 'Effect of block copolymer nano-reinforcements on the low velocity impact response of sandwich structures', Composite Structures, vol. 110, pp. 174 - 182, 10.1016/j.compstruct.2013.12.001

Ashraf MA; Morozov EV; Shankar K, 2014, 'Flexure analysis of spoolable reinforced thermoplastic pipes for offshore oil and gas applications', Journal of Reinforced Plastics and Composites, vol. 33, pp. 533 - 542, 10.1177/0731684413491442

Wang C; Shankar K; Morozov EV, 2014, 'Tailored local design of deep sea FRP composite risers', Advanced Composite Materials, 10.1080/09243046.2014.898438

Chen JF; Morozov EV; Shankar K, 2014, 'Simulating progressive failure of composite laminates including in-ply and delamination damage effects', Composites Part A: Applied Science and Manufacturing, vol. 61, pp. 185 - 200, 10.1016/j.compositesa.2014.02.013

Thabet A; Shankar K; Morozov EV, 2014, 'Behaviour of PU-foam/glass-fibre composite sandwich panels under flexural static load', Materials and Structures, vol. 47, pp. 1 - 15, 10.1617/s11527-014-0253-3

Mostafa A; Shankar K; Morozov EV, 2014, 'Independent analytical technique for analysis of the flexural behaviour of the composite sandwich panels incorporated with shear keys concept', Materials and Structures, 10.1617/s11527-014-0331-6

Chen JF; Morozov EV; Shankar K, 2014, 'Progressive failure analysis of perforated aluminium/CFRP fibre metal laminates using a combined elastoplastic damage model and including delamination effects', Composite Structures, vol. 114, pp. 64 - 79, 10.1016/j.compstruct.2014.03.046

Yu K; Morozov EV; Ashraf MA; Shankar K, 2014, 'Analysis of flexural behaviour of reinforced thermoplastic pipes considering material nonlinearity', Composite Structures, vol. 119, pp. 385 - 393, 10.1016/j.compstruct.2014.09.015

Barnes RH; Morozov EV; Shankar K, 2014, 'Improved methodology for design of low wind speed specific wind turbine blades', Composite Structures, vol. 119, pp. 677 - 684, 10.1016/j.compstruct.2014.09.034

Mostafa A; Shankar K; Morozov EV, 2014, 'In-plane shear behaviour of composite sandwich panel incorporated with shear keys methodology at different orientations: Finite element study', Journal of Composite Materials, vol. 48, pp. 2945 - 2959, 10.1177/0021998313503588

Mostafa A; Shankar K; Morozov EV, 2014, 'Experimental, Theoretical and Numerical Investigation of the Flexural Behaviour of the Composite Sandwich Panels with PVC Foam Core', Applied Composite Materials, vol. 21, pp. 661 - 675, 10.1007/s10443-013-9361-4

Thabet A; Shankar K; Morozov EV, 2013, 'Insight into the shear behaviour of composite sandwich panels with foam core', Materials and Design, vol. 50, pp. 92 - 101, 10.1016/j.matdes.2013.03.016

Thabet A; Shankar K; Morozov EV, 2013, 'Effect of shear keys diameter on the shear performance of composite sandwich panel with PVC and PU foam core: FE study', Composite Structures, vol. 102, pp. 90 - 100, 10.1016/j.compstruct.2013.03.003

Ramakrishnan KR; Shankar K, 2013, 'Experimental and numerical analysis of low-velocity impact of plastic laminates', Fatigue and Fracture of Engineering Materials and Structures, 10.1111/ffe.12099

Choi J; Shankar K; Choi B; Lee J-H, 2013, 'In-plane shear behavior of corrugated cellular solids and validation of an open-cell corrugated cellular solid', INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, vol. 14, pp. 1767 - 1774, 10.1007/s12541-013-0236-2

Thabet A; Shankar K, 2013, 'Finite Element Study on the Influence of Shear Key Diameter on the Shear Performance of Composite Sandwich Panel with PU Foam Core', Applied Mechanics and Materials, vol. 376, pp. 103 - 107, 10.4028/www.scientific.net/AMM.376.103

Thabet A; Shankar K, 2013, 'In-Plane Shear Damage Prediction of Composite Sandwich Panel with Foam Core', Applied Mechanics and Materials, vol. 376, pp. 69 - 73, 10.4028/www.scientific.net/AMM.376.69

Shankar K; Thabet A, 2013, 'Investigation on Effect of the Pitch of Shear Keys on the In-Plane Shear Performance of Sandwich Panels with PU Foam Core: FE Study', Applied Mechanics and Materials, vol. 376, pp. 158 - 162, 10.4028/www.scientific.net/AMM.376.158

Choi J; Shankar K; Tahtali M, 2013, 'Numerical investigation of corrugated wire mesh laminate', Journal of Engineering (United States), vol. 2013, 10.1155/2013/470241

Wang C; Shankar K; Morozov EV, 2012, 'Design of Composite Risers for Minimum Weight', World Academy of Science, Engineering and Technology, pp. 54 - 63, http://www.waset.org/journals/waset/v72/v72-11.pdf

Choi J; Shankar K; Tahtali M, 2012, 'Mechanical behavior and numerical analysis of corrugated wire mesh laminates', Journal of Mechanical Science and Technology, vol. 26, pp. 73 - 80, 10.1007/s12206-011-0935-5

Rahman M; Morozov EV; Shankar K; Tahtali M, 2011, 'Simulation of impact response of multi-layered panels composed of bonded and unbonded plies', Australian Journal of Mechanical Engineering, vol. 8, pp. 189 - 196, 10.1080/14484846.2011.11464610

Ahmed A; Neely AJ; Shankar K, 2011, 'Experimental comparison of the effects of nanometric and micrometric particulates on the tensile properties and fracture behavior of Al composites at room and elevated temperatures', Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 42, pp. 795 - 815, 10.1007/s11661-010-0505-y

Ahmed A; Neely AJ; Shankar K; Nolan P; Moricca S; Eddowes T, 2010, 'Synthesis, tensile testing, and microstructural characterization of nanometric sic particulate-reinforced Al 7075 matrix composites', Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 41, pp. 1582 - 1591, 10.1007/s11661-010-0201-y

Russo S; Sharp K; Dhamari R; Mills T; Hinton B; Clark G; Shankar K, 2009, 'The influence of the environment and corrosion on the structural integrity of aircraft materials', Fatigue & Fracture of Engineering Materials & Structures, vol. 32, pp. 464 - 472, 10.1111/j.1460-2695.2009.01348.x

Hang H; Shankar K; Lai JCS, 2009, 'Effects of distributed structural dynamic modification with reduced degrees of freedom', Mechanical Systems and Signal Processing, vol. 23, pp. 2154 - 2177, 10.1016/j.ymssp.2009.03.014

Couldrick JS; Gai SL; Milthorpe JF; Shankar K, 2009, 'Investigation of unswept normal shock wave/turbulent-boundary-layer interaction control', Journal of Aircraft, vol. 46, pp. 1634 - 1641, 10.2514/1.42104

Viot P; Shankar K; Bernard D, 2008, 'Effect of strain rate and density on dynamic behaviour of syntactic foam', Composite Structures, vol. 86, pp. 314 - 327, 10.1016/j.compstruct.2008.07.021

Hang H; Shankar K; Lai JCS, 2008, 'Prediction of the effects on dynamic response due to distributed structural modification with additional degrees of freedom', Mechanical Systems and Signal Processing, vol. 22, pp. 1809 - 1825, 10.1016/j.ymssp.2008.02.006

Ahmed A; Neely AJ; Shankar KK; Chan SLI, 2007, 'Tensile behaviour of nano-particulate reinforced aluminium matrix composites at elevated temperatures', Materials Science Forum, vol. 561-565, pp. 761 - 764

Moore SM; Lai JCS; Shankar K, 2007, 'ARMAX modal parameter identification in the presence of unmeasured excitation-I: Theoretical background', Mechanical Systems and Signal Processing, vol. 21, pp. 1601 - 1615, 10.1016/j.ymssp.2006.07.003

Moore SM; Lai JCS; Shankar K, 2007, 'ARMAX modal parameter identification in the presence of unmeasured excitation-II: Numerical and experimental verification', Mechanical Systems and Signal Processing, vol. 21, pp. 1616 - 1641, 10.1016/j.ymssp.2006.07.004

Shankar K; Wilson D; Fien AR; Nolan P; Clark RK, 2006, 'Hammer handle testing', New Studies in Athletics, vol. 21, pp. 57 - 66

Shankar K; Xie HM; Wei R; Asundi A; Boay C, 2004, 'A study on residual stresses in polymer composites using moire interferometry', Advanced Composite Materials, vol. 13, pp. 237 - 253

Shankar K; Xie H; Wei R; Asundi A; Boay CG, 2004, 'A study on residual stresses in polymer composites using moiré interferometry', Advanced Composite Materials: The Official Journal of the Japan Society of Composite Materials, vol. 13, pp. 237 - 253, 10.1163/1568551042580181

Couldrick JS; Gai SL; Milthorpe JF; Shankar K, 2004, 'Investigation of active control of swept shock wave/turbulent boundary-layer interactions - PSP results', Aeronautical Journal, vol. 108, pp. 483 - 490, 10.1017/S0001924000000300

Couldrick JS; Gai SL; Milthorpe JF; Shankar K, 2004, 'Active control of swept shock wave/turbulent boundary-layer interactions', Aeronautical Journal, vol. 108, pp. 93 - 101, 10.1017/S0001924000005042

Couldrick J; Shankar K; Gai SL; Milthorpe JF, 2003, 'Design of `Smart` Flap Actuators for Swept Shock Wave/Turbulent Boundary Layer', Structural Engineering and Mechanics, vol. 16 (5), pp. 519 - 532

Purry C; Fien A; Shankar K, 2003, 'The effect of corrosion preventative compound on fatigue crack growth properties of 2024-T351 aluminium alloys', International Journal of Fatigue, vol. 25, pp. 1175 - 1180, 10.1016/j.ijfatigue.2003.08.016

Shankar K; Wu W, 2002, 'Effect of welding and weld repair on crack propagation behaviour in aluminium alloy 5083 plates', Materials and Design, vol. 23, pp. 201 - 208

Shankar K; Dhamari R, 2002, 'Fatigue behaviour of aluminium alloy 7075 bolted joints treated with oily film corrosion compounds', Materials and Design, vol. 23, pp. 209 - 216, 10.1016/S0261-3069(01)00060-7

Shankar K; Xie H; Asundi AK; Oh KE; Chai GB, 2001, 'Measurement of residual stresses in polymer composites using Moiré interferometry', Proceedings of SPIE - The International Society for Optical Engineering, vol. 4317, pp. 198 - 203, 10.1117/12.429571

Conference Papers

Khaksar Z; Anavatti S; Shankar K, 2018, 'The vibration simulation at the helicopter pilot’s body segments in vertical direction', in Advances in Intelligent Systems and Computing, pp. 292 - 300, presented at , 10.1007/978-3-319-67792-7_29

Khaksar Z; Anavatti S; Shankar K; Ceruti A; Pratt H, 2017, 'The Vibration Impact Determination of the Helicopter Structural Components', in MATEC Web of Conferences, presented at , 10.1051/matecconf/20179507027

Khaksar Z; Anavatti S; Ceruti A; Shankar K, 2017, 'The simulation of vibration at the supine patient’s body in HEMS', in 9th Australasian Congress on Applied Mechanics, ACAM 2017, presented at

Khaksar Z; Anavatti S; Shankar K; Ceruti A, 2017, 'Physiological and psychological response modelling of the helicopter pilot through vibration simulation', in 43rd European Rotorcraft Forum, ERF 2017, pp. 1441 - 1446, presented at

Chowdhury MS; Krishna Shankar; Andrew McKelvie; Morozov, (ed.), 2016, 'Damage Identification in a Composite Stiffened Panel with T Stiffeners using ERA/NExT: Simulated Approach', in 2016 Advanced Composites Innovation Conference, 2016 Advanced Composites Innovation Conference, Melbourne, Australia, presented at 2016 Advanced Composites Innovation Conference, Melbourne, Australia, 12 - 14 April 2016, http://www.compositesconference.com.au/2016-composites-conference/speakers/peer-reviewed-steam/md-shakar-ullah-chowdhury/

Ubulom IA; Fien A; Neely AJ; Shankar K, 2016, 'Turbine blade life prediction using fluid-Thermal-structural interaction simulation', in Proceedings of the ASME Turbo Expo, presented at , 10.1115/GT2016-57048

Ramakrishnan KR; Shankar K; Hoo B; Fien A, 2016, 'Investigation of novel bagasse fibre hybrid crash barriers using numerical simulation', in ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials, presented at

Wang HX; Hazell PJ; Shankar K; Morozov EV; Escobedo JP, 2015, 'The effectiveness of combined gripping method in tensile testing of UHMWPE single yarn', in IOP Conference Series: Materials Science and Engineering, presented at , 10.1088/1757-899X/87/1/012109

Ubulom IA; Shankar K; Neely AJ, 2015, 'Turbine blade life prediction using fluid-thermal-structural interaction modelling', in Proceedings of the ASME Turbo Expo, presented at , 10.1115/GT2015-43071

Wang H; Hazell PJ; Shankar K; Morozov EV; Escobedo JP, (eds.), 2015, 'Tensile Properties of UHMWPE single yarn at different strain rates', in Tensile Properties of UHMWPE single yarn at different strain rates, 10th International Conference on Composite Science and Technology, Lisbon, Portugal, presented at 10th International Conference on Composite Science and Technology, Lisbon, Portugal, 02 - 04 September 2015, http://www.dem.ist.utl.pt/iccst10/files/ICCST10_Proceedings/pdf/WEB_PAPERS/ICCST10_Upload_91.pdf

Ramakrishnan KR; Guérard S; Maheó L; Shankar K; Viot P, 2015, 'Development of a finite element model for the simulation of parabolic impact of sandwich panels', in EPJ Web of Conferences, presented at , 10.1051/epjconf/20159401018

Wang C; Shankar K; Fien A, 2015, 'Finite element simulation of impact response of wire mesh screens', in EPJ Web of Conferences, presented at , 10.1051/epjconf/20159404033

Barnes R; Morozov E; Shankar K, (eds.), 2015, 'STRUCTURAL OPTIMISATION OF THE EXTERNAL SHELL OF A LOW WIND SPEED WIND TURBINE BLADE', in M2D2015: PROCEEDINGS OF THE 6TH INTERNATIONAL CONFERENCE ON MECHANICS AND MATERIALS IN DESIGN, INEGI-FEUP, P Delgada, PORTUGAL, pp. 1535 - 1536, presented at 6th International Conference on Mechanics and Materials in Design (M2D), P Delgada, PORTUGAL, 26 - 30 July 2015

Barnes RH; Morozov EV; Shankar K, 2015, 'Evaluation of simplified loading models for finite element analysis of composite wind turbine blades', in ICCM International Conferences on Composite Materials, presented at

Ramakrishnan KR; Thompson WRH; Shankar K; Ashraf MA, 2014, 'Impact behaviour of natural fibre reinforced composites based on bagasse fibres', in Impact behaviour of natural fibre reinforced composites based on bagasse fibres, Mechanics of Composites (MECHCOMP 2014), Stony Brook University, NY, presented at Mechanics of Composites (MECHCOMP 2014), Stony Brook University, NY, 08 - 12 June 2014, https://sites.google.com/site/mechcomp2014/

Ramakrishnan KR; Shankar K, 2014, 'Low velocity impact of sandwich plates with different cores - Experiment and Simulation', in Proceedings of the 1st International Conference on Mechanics of Composites, Stony Brook University, Long Island, New York, USA, Stony Brook University, NY, presented at Mechanics of Composites (MECHCOMP 2014), Stony Brook University, NY, 08 - 12 June 2014, http://imechanica.org/node/15199

Ramakrishnan KR; Guérard S; Shankar K; Viot P, (ed.), 2014, 'Drop tower experiments on Glass FRP sandwich plates with nano-elastomeric particles', in 4TH International Conference on Impact Loading of Lightweight Structures (ICILLS 2014), 4TH International Conference on Impact Loading of Lightweight Structures (ICILLS 2014), Cape Town, South Africa, presented at 4TH International Conference on Impact Loading of Lightweight Structures (ICILLS 2014), Cape Town, South Africa, 12 - 16 January 2014, http://icills2014.org/wp-content/uploads/2014/01/Karthik-Ramakrishnan.pdf

Ubulom IA; Neely AJ; Shankar K, (eds.), 2014, 'Heat Transfer and Temperature Prediction of the gas turbine stage using fluid-thermal-structural interaction', in Proceedings of the 19th Australian Fluid Mechanics Conference, 19th Australian Fluid Mechanics Conference, Melbourne, presented at 19th Australian Fluid Mechanics Conference, Melbourne, 08 - 12 December 2014, http://people.eng.unimelb.edu.au/imarusic/proceedings/19%20AFMC%20TOC.htm

Chowdhury MS; morozov; ali; shankar K, 2014, 'DAMAGE DETECTION IN COMPOSITE PLATES USING TRANSIENT VIBRATION ANALYSIS', in COMPOSITE AUSTRALIA and CRC-ACS CONFERENCE, COMPOSITE AUSTRALIA and CRC-ACS CONFERENCE, Newcastle, Australia, presented at COMPOSITE AUSTRALIA and CRC-ACS CONFERENCE, Newcastle, Australia, 07 - 09 April 2014, http://www.compositesaustralia.com.au/wp-content/uploads/2014/04/Md.-Shakar-Ullah-Chowdhury.pdf

Yu K; Morozov EV; Ashraf MA; Shankar K, (ed.), 2014, 'Numerical analysis of the flexural behaviour of reinforced thermoplastic pipes for offshore oil and gas applications', in Materials for a lighter and smarter world, Composites Australia, Newcastle, presented at Composites Australia and CRC-ACS Conference 2014, Newcastle, 07 - 09 April 2014

Barnes RH; Morozov EV; Shankar K, 2014, 'Structural analysis of a low wind speed wind turbine blade', in 8th Australasian Congress on Applied Mechanics, ACAM 2014, as Part of Engineers Australia Convention 2014, pp. 966 - 973, presented at

Ashraf MA; Morozov EV; Falzon P; Shankar K, 2014, 'Liner stability analysis for HDPE-lined pipe under bending', in 8th Australasian Congress on Applied Mechanics, ACAM 2014, as Part of Engineers Australia Convention 2014, pp. 811 - 817, presented at

Ramakrishnan KR; Wang H; Shankar K; Fien A, 2014, 'Measurement of biomechanical energy delivered through kicking', in 8th Australasian Congress on Applied Mechanics, ACAM 2014, as Part of Engineers Australia Convention 2014, pp. 614 - 621, presented at

Yu K; Morozov EV; Ashraf MA; Shankar K, 2014, 'Buckling behaviour of reinforced thermoplastic pipes under combined external pressure and bending', in 8th Australasian Congress on Applied Mechanics, ACAM 2014, as Part of Engineers Australia Convention 2014, pp. 87 - 94, presented at

Wang H; Hazell PJ; Shankar K, 2014, 'Numerical simulation of ballistic impact on woven CFRP laminate', in 8th Australasian Congress on Applied Mechanics, ACAM 2014, as Part of Engineers Australia Convention 2014, pp. 1021 - 1029, presented at

Ubulom IA; Neely AJ; Shankar K, 2014, 'Heat transfer prediction of a turbine stage using fluid-thermal-structural interaction simulation', in Proceedings of the 19th Australasian Fluid Mechanics Conference, AFMC 2014, presented at

Zhang Z; Shankar K; Ray T; Tahtali M, 2013, 'Delamination Monitoring of Composite Plates using Vibration-based Surrogate Assisted Optimisation', in Proceedings 8th DSTO International Conference on Health & Usage Monitoring Systems (HUMS2013), 8th DSTO International Conference on Health & Usage Monitoring Systems (HUMS2013), Melbourne, presented at 8th DSTO International Conference on Health & Usage Monitoring Systems (HUMS2013), Melbourne, 26 - 28 February 2013

Ali MY; Shankar K, 2013, 'Agent based damaged detection in composite laminates', in Proceedings of SPIE - The International Society for Optical Engineering, presented at , 10.1117/12.2009557

Ali MY; Shankar K, 2013, 'Structural Health Monitoring of Composites using System Identification', in Proceedings 15th Australian International Aerospace Congress (AIAC15), 15th Australian International Aerospace Congress, Melbourne, Australia, pp. 1 - 17, presented at 15th Australian International Aerospace Congress, Melbourne, Australia, 25 - 28 February 2013

Thabet AM; Shankar K; Morozov EV, (ed.), 2013, 'The Impact of the Shear Key Pitch on the Shear Performance of the Composite Sandwich Panels with PVC foam core: FE Analysis', in Proceedings of Annual Conference on Engineering and Information Technology (ACEAIT), Annual Conference on Engineering & Information Technology (ACEAIT 2013), Seoul, Korea, presented at Annual Conference on Engineering & Information Technology (ACEAIT 2013), Seoul, Korea, 28 - 30 June 2013

Thabet AM; Shankar K; Morozov EV, (ed.), 2013, 'Numerical Investigation on the Influence of the Shear Key Diameter on the Shear Response of the Composite Sandwich Panels with PVC foam core', in Proceedings of Annual Conference on Engineering and Information Technology (ACEAIT), Annual Conference on Engineering & Information Technology (ACEAIT 2013), Seoul, Korea, presented at Annual Conference on Engineering & Information Technology (ACEAIT 2013), Seoul, Korea, 28 - 30 June 2013, http://www.aceait.org/index.asp?id=1

Thabet AM; Shankar K, (ed.), 2013, 'In-Plane Shear Damage Prediction of Composite Sandwich Panel with Foam Core', in In-Plane Shear Damage Prediction of Composite Sandwich Panel with Foam Core, 2013 INTERNATIONAL CONFERENCE ON MECHANICAL, AUTOMOTIVE AND MATERIALS ENGINEERING (CMAME 2013), Hong Kong, presented at 2013 INTERNATIONAL CONFERENCE ON MECHANICAL, AUTOMOTIVE AND MATERIALS ENGINEERING (CMAME 2013), Hong Kong, 26 - 27 July 2013, http://www.cmame.net/

Thabet AM; Shankar K, (ed.), 2013, 'Finite Element Study on the Influence of Shear Key Diameter on the Shear Performance of Composite Sandwich Panel with PU Foam Core', in Finite Element Study on the Influence of Shear Key Diameter on the Shear Performance of Composite Sandwich Panel with PU Foam Core, 2013 INTERNATIONAL CONFERENCE ON MECHANICAL, AUTOMOTIVE AND MATERIALS ENGINEERING (CMAME 2013), Hong Kong, presented at 2013 INTERNATIONAL CONFERENCE ON MECHANICAL, AUTOMOTIVE AND MATERIALS ENGINEERING (CMAME 2013), Hong Kong, 26 - 27 July 2013, http://www.cmame.net/

Thabet AM; Shankar K, (ed.), 2013, 'Investigation on Effect of the Pitch of Shear Keys on the In-Plane Shear Performance of Sandwich Panels with PU Foam Core: FE Study', in Investigation on Effect of the Pitch of Shear Keys on the In-Plane Shear Performance of Sandwich Panels with PU Foam Core: FE Study, 2013 INTERNATIONAL CONFERENCE ON MECHANICAL, AUTOMOTIVE AND MATERIALS ENGINEERING (CMAME 2013), Hong Kong, presented at 2013 INTERNATIONAL CONFERENCE ON MECHANICAL, AUTOMOTIVE AND MATERIALS ENGINEERING (CMAME 2013), Hong Kong, 26 - 27 July 2013, http://www.cmame.net/

Uddin MS; Morozov EV; Shankar K, 2013, 'Stress analysis of a filament wound composite flywheel disk', in ICCM International Conferences on Composite Materials, pp. 3053 - 3063, presented at

Chen JF; Morozov EV; Shankar K, 2013, 'Progressive failure analysis of composite laminates including strain rate effect', in ICCM International Conferences on Composite Materials, pp. 4122 - 4132, presented at

Wang C; Shankar K; Morozov EV, 2012, 'Design of Deep Sea Composite Risers under Combined Environmental Loads', in Composites CRC and Composites Australia Conference and Exhibition, Composites Australia, Leura, Blue Mountains, NSW, pp. 97 - 110, presented at 2012 Composites Australia & CRC-ACS Conference, Leura, Blue Mountains, NSW, 15 - 16 March 2012, http://www.compositesaustralia.com.au/wp-content/uploads/2012/09/Composites-Australia-and-CRC-2012-Proceedings-Final.pdf

Zhang Z; Morozov EV; Shankar K; Tahtali M, 2012, 'DELAMINATION DETECTION IN COMPOSITE STRUCTURES USING FREQUENCY MEASUREMENTS', in Composites CRC and Composites Australia Conference and Exhibition, Composites Australia, Fairmont Resort Blue Mountains, Leura, New South Wales, Australia, pp. 1 - 16, presented at Diversity in Composites, Fairmont Resort Blue Mountains, Leura, New South Wales, Australia, 15 - 16 March 2012

Ihesiulor OK; Shankar K; Zhang Z; Ray T, 2012, 'Delamination detection using methods of computational intelligence', in AIP Conference Proceedings, pp. 303 - 310, presented at , 10.1063/1.4769006

Ihesiulor OK; Shankar K; Zhang Z; Ray T, 2012, 'Effectiveness of artificial neural networks and surrogate-assisted optimization techniques in delamination detection for structural health monitoring', in Proceedings of the IASTED International Conference on Modelling and Simulation, pp. 198 - 203, presented at , 10.2316/P.2012.783-042

Rahman M; Morozov EV; Shankar K; Fien A, 2012, 'Computational analysis of low velocity impact response of composite panels', in Applied Mechanics and Materials, pp. 1135 - 1138, presented at , 10.4028/www.scientific.net/AMM.157-158.1135

Dhopade P; Neely AJ; Young J; Shankar K, 2012, 'High-cycle fatigue of fan blades accounting for fluid-structure interaction', in Proceedings of the ASME Turbo Expo, pp. 1365 - 1372, presented at , 10.1115/GT2012-68102

Ramakrishnan KR; Shankar K; Viot P; Guerard S, 2012, 'A numerical study of the impact properties of sandwich panels with different cores', in Advances in Applied Mechanics Research, Conference Proceedings - 7th Australasian Congress on Applied Mechanics, ACAM 2012, pp. 915 - 924, presented at

Chen J; Morozov EV; Shankar K, 2011, 'Numerical analysis of the progressive failure of composite materials and structures using plastic-damage model', in Proceedings of the International Conference on Computational Modeling of Fracture and Failure of Materials and Structures, CIMNE, Barcelona, Spain, Barcelona, Spain, presented at International Conference on Computational Modeling of Fracture and Failure of Materials and Structures, Barcelona, Spain, 06 - 08 June 2011, http://congress.cimne.com/cfrac2011/frontal/ProgIntro.asp

Dhopade P; Neely AJ; Young J; Shankar K, 2011, 'Use of Fluid-Structure Interaction to Estimate Fatigue Life of Gas Turbine Compressor Blades', in 20th International Society for Airbreathing Engines Conference, ISABE 2011, Gothenburg, presented at ISABE 2011, Gothenburg, 12 - 16 September 2011

Rahman M; Morozov EV; Shankar K, 2011, 'Dynamic response of bonded and unbonded laminated composite panels', in International SAMPE Technical Conference, presented at

Chen JF; Morozov EV; Shankar K, 2011, 'Plastic damage model for progressive failure analysis of composite structures', in ICCM International Conferences on Composite Materials, presented at

Zhang Z; Shankar K; Tahtali M; Morozov EV, 2011, 'Vibration monitoring of composite laminates with delamination damage', in ICCM International Conferences on Composite Materials, presented at

Wang C; Shankar K; Morozov EV, 2011, 'Tailoring of composite reinforcements for weight reduction of offshore production risers', in Applied Mechanics and Materials, pp. 1416 - 1421, presented at , 10.4028/www.scientific.net/AMM.66-68.1416

Zhang Z; Shankar K; Tahtali M; Morozov EV, 2011, 'Graphical detection method for delaminations', in Applied Mechanics and Materials, pp. 1410 - 1415, presented at , 10.4028/www.scientific.net/AMM.66-68.1410

Wang C; Shankar K; Morozov EV, 2010, 'Numerical Analysis of Deep Sea Steel Risers under Combined Loads', in Proceedings of the 6th Australiasian Congress on Applied Mechanics, Engineers Australia, Perth, Australia, presented at 6th Australasian Congress on Applied Mechanics, Perth, Australia, 12 - 15 December 2010

Ramakrishnan KR; Shankar K; Neely AJ; Horoschun G, 2010, 'Evaluation of low velocity impact using a multi-parameter approach', in Evaluation of low velocity impact using a multi-parameter approach, International Conference on Experimental Mechanics, Kuala Lumpur, presented at International Conference on Experimental Mechanics, Kuala Lumpur, 30 November 2010, http://online.nuclearmalaysia.gov.my/sems/icem2010/

Rahman M; Morozov EV; Shankar K; Tahtali M, 2010, 'Simulation of impact response of multilayered panels composed of bonded and unbonded plies', in Proceedings of the 6th Australiasian Congress on Applied Mechanics, Engineers Australia, Perth, Australia, pp. 631 - 639, presented at The 6th Australasian Congress on Applied Mechanics, ACAM 6, Perth, Australia, 12 - 15 December 2010, http://search.informit.com.au/documentSummary;dn=016876767383815;res=IELENG

Shankar K; Kannappan L, 2009, 'Structural Integrity Assessment of Plates using Vibration Monitoring: Theory and Simulation', in Thirteenth Australian International Aerospace Congress, DSTO, Melbourne, Victoria, presented at 6th DSTO International Conference on Health & Usage Monitoring (HUMS 09), Melbourne, Victoria, 09 - 12 March 2009

Choi JH; Shankar K; Fien AR; Neely AJ, 2009, 'Methods of manufacture of corrugated wire mesh laminates', in Proceedings of World Academy of Sciency, Engineering and Technology, World Academy of Sciency, Engineering and Technology, Tokyo, Japan, presented at ICME 2009: International Conference on Mechanical Engineering, Tokyo, Japan, 27 - 29 May 2009

Kannappan L; Shankar K; Sreenatha AG, (ed.), 2007, 'Detection of multiple cracks in cantilever beams using frequency measurements', in International conference on experimental mechanics (ICEM 13), International conference on experimental mechanics (ICEM 13), Alexandroupolis, pp. 415 - 416, presented at International conference on experimental mechanics (ICEM 13), Alexandroupolis, 01 - 06 July 2007

Kannappan L; Shankar K, 2007, 'Non destructive inspection of plates using frequency measurements', in Proceedings of the 5th Australasian Congress on Applied Mechanics : 10-12 December 2007, Brisbane, Australia, Engineers Australia, Brisbane, Qld, presented at 5th Australian Congress on Applied Mechanics, ACAM 2007, Brisbane, Qld, 10 - 12 December 2007

Kannappan L; Shankar K; Sreenatha AG, 2007, 'Experimental verification of detection of centre cracks in cantilever beams using energy methods', in International conference on advanced technology in experimental mechanics (ATEM 2007), International conference on advanced technology in experimental mechanics (ATEM `07), Fukuoka, Japan, presented at International conference on advanced technology in experimental mechanics (ATEM `07), Fukuoka, Japan, 12 - 14 September 2007

Kannappan L; Shankar K; Sreenatha AG, 2007, 'Detection of centre cracks in cantilever beams using frequency measurements', in Damage assessment of structures 2007, Damage assessment of structures 2007, Torino, Italy, presented at Damage assessment of structures 2007, Torino, Italy, 25 - 27 June 2007

Ahmed A; Neely AJ; Shankar K, 2007, 'Effect of ceramic reinforcements on the mechanical behaviour of 7xxx series aluminium matrix composites', in Proceedings of the 5th Australasian Congress on Applied Mechanics : 10-12 December 2007, Brisbane, Australia, Engineers Australia, Brisbane, Qld, presented at 5th Australian Congress on Applied Mechanics, ACAM 2007, Brisbane, Qld, 10 - 12 December 2007

Hang H; Shankar K; Lai J, 2007, 'Prediction of dynamic response due to distributed structural modifications', in Progress in Mechanics of Structures and Materials - Proceedings of the 19th Australasian Conference on the Mechanics of Structures and Materials, ACMSM19, pp. 295 - 301, presented at

Ahmed A; Neely AJ; Shankar KK, 2007, 'Review of the mechanical behavior of micrometric & nanometric particulate reinforced metal matrix composites', in Materials Science and Technology Conference and Exhibition, MS and T'07 - "Exploring Structure, Processing, and Applications Across Multiple Materials Systems", pp. 1993 - 2004, presented at

Kannappan L; Shankar K; Anavatti SG, 2007, 'Damage detection using frequency measurements', in Conference Proceedings of the Society for Experimental Mechanics Series, presented at

Shankar K; Cave D, 2007, 'Mechanical properties of ultra low density glass micro-sphere filled syntactic foam composites', in Progress in Mechanics of Structures and Materials - Proceedings of the 19th Australasian Conference on the Mechanics of Structures and Materials, ACMSM19, pp. 595 - 600, presented at

Kannappan L; Shankar K, 2007, 'Frequency measurement based damage detection methods applied to different cracks configurations', in Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, pp. 4327 - 4338, presented at

Couldrick JS; Gai SL; Milthorpe JF; Shankar K, 2006, 'Theoretical analysis of unswept normal shock wave/boundary layer interaction control using streamwise flaps', in Collection of Technical Papers - 3rd AIAA Flow Control Conference, pp. 894 - 903, presented at

Moore S; Lai J; Shankar K, 2005, 'ARMAX modal parameter estimation using random and periodic excitation', in Proceedings of the 1st International Operational Modal Analysis Conference, IOMAC 2005, presented at

Couldrick JS; Gai SL; Holden HA; Babinsky H; Milthorpe JF; Shankar K, 2004, 'Active control of normal shock wave/turbulent boundary layer interaction using "Smart" piezoelectric flap actuators', in 2nd AIAA Flow Control Conference, presented at

Moore SM; Zhang B; Lai JC; Shankar K, (ed.), 2003, 'Model updating and determination of structural dynamic properties in the presence of a second source of excitation', in Proeedings of the 3rd International Conference on Health and Usage Monitoring - HUMS 2003, Proeedings of the 3rd International Conference on Health and Usage Monitoring - HUMS 2003, Melbourne, pp. 27 - 34, presented at Proeedings of the 3rd International Conference on Health and Usage Monitoring - HUMS 2003, Melbourne, 17 - 18 February 2003

Couldrick J; Shankar K; Gai S; Milthorpe J, 2003, 'Design of "smart" flap actuators for swept shock wave/turbulent boundary layer interaction control', in Structural Engineering and Mechanics, pp. 519 - 531, presented at , 10.1296/SEM2003.16.05.01

Todo M; Shinohara N; Arakawa K; Shankar K, 2002, 'Effect of Crystallization on the Mode I Fracture Behaviour of Biodegradable Poly(lactic acid)', in 3rd Asian International Symposium on Biomaterials and Drug Delivery Systems, 3rd Asian International Symposium on Biomaterials and Drug Delivery Systems, Taiwan, presented at 3rd Asian International Symposium on Biomaterials and Drug Delivery Systems, Taiwan, 14 - 15 April 2002

Couldrick J; Gai S; Milthorpe J; Shankar K, 2002, 'Swept shock wave / turbulent boundary layer interaction control with "smart" flap actuators', in 40th AIAA Aerospace Sciences Meeting and Exhibit, presented at

Shankar K; Wu W, 2001, 'Effect of welding and weld repair on crack propagation behavior in aluminium alloy 5083 plates', in International Conference on Advances in Production and Processing of Aluminium, APPA2001, International Conference on Advances in Production and Processing of Aluminium, APPA2001, Bahrain, presented at International Conference on Advances in Production and Processing of Aluminium, APPA2001, Bahrain, 12 - 15 February 2001

Shankar K; Dhamari RD, 2001, 'Fatigue Behaviour of Aluminium Alloy 7075 Bolted Joints treated with Oily Film Corrosion Compounds', in International Conference on Advances in Production and Processing of Aluminium, APPA2001, International Conference on Advances in Production and Processing of Aluminium, APPA2001, Bahrain, presented at International Conference on Advances in Production and Processing of Aluminium, APPA2001, Bahrain, 12 - 15 February 2001

Couldrick J; Gai SL; Shankar K; Milthorpe JF, (ed.), 2001, 'Development of `Smart` Flap Actuators for Swept Shock Wave Boundary Layer Interation Control', in AIAC 2003: 10th Australian International Aerospace Congress, AIAC 2003: 10th Australian International Aerospace Congress, Brisbane, Australia, pp. 9, presented at AIAC 2003: 10th Australian International Aerospace Congress, Brisbane, Australia, 06 - 08 March 2001

Shankar K; Huimin X; Asundi A; Eng OK, (ed.), 2001, 'Residual stress measurement in laminated fibre composites with moire interferometry', in AIAC 2003: 10th Australian International Aerospace Congress, AIAC 2003: 10th Australian International Aerospace Congress, Brisbane, Australia, presented at AIAC 2003: 10th Australian International Aerospace Congress, Brisbane, Australia, 06 - 08 March 2001

Shankar K; Dhamari RD; Wei R; Hinton B; Clark G; Sharp K; Mills T, (ed.), 2001, 'Effect of Corrosion Prevention Compounds on Fatigue of One-And-Half DogBone Joints', in AIAC 2003: 10th Australian International Aerospace Congress, AIAC 2003: 10th Australian International Aerospace Congress, Brisbane, Australia, presented at AIAC 2003: 10th Australian International Aerospace Congress, Brisbane, Australia, 06 - 08 March 2001

Shankar K; Tahtali M; Chester R; Torr G, 2001, 'Piezoelectric film sensor for measurement of peel stresses in bonded joints', in Proceedings of SPIE - The International Society for Optical Engineering, pp. 363 - 368, presented at , 10.1117/12.429603

Russo SG; Sharp PK; Dhamari RD; Mills TB; Hinton B; Shankar K; Clark G, 2000, 'Effect of the environment and corrosion on the fatigue life of a simulated aircraft structural joint', in IMPLAST 2000, 7th international symposium on structural failure and plasticity (IMPLAST 2000), Melbourne, pp. 765 - 771, presented at 7th international symposium on structural failure and plasticity (IMPLAST 2000), Melbourne, 04 - 06 October 2000

Tahtali M; Shankar K; Torr G; Chesr, 2000, 'Measurement of peel stresses in adhesively bonded joints using piezoelectric film sensors', in ICCE/7, 7th International Conference Composites Engineering, Denver, Colorado, pp. 847 - 848, presented at 7th International Conference Composites Engineering, Denver, Colorado, 02 - 08 July 2000

Dhamari RD; Shankar K, 2000, 'The effects of corrosion prevention compounds and clamping force on fatigue behaviour of mechanically fastened joints', in 41st AIAA/ASME/ASCE/AHS/ASC conf, 41st AIAA/ASME/ASCE/AHS/ASC conf, Atlanta, Georgia USA, presented at 41st AIAA/ASME/ASCE/AHS/ASC conf, Atlanta, Georgia USA, 03 - 06 April 2000

Wu WD; Shankar K, (ed.), 2000, 'Fatigue crack propagation behaviour of welded and weld-repaired 5083 aluminium alloy joints', in RISK, ECONOMY AND SAFETY, FAILURE MINIMISATION AND ANALYSIS: FAILURES 2000, ENGINEERING MATERIALS ADVISORY SERVICES LTD, Unhlansa Rock, SOUTH AFRICA, pp. 453 - +, presented at 4th International Symposium on Risk, Economy and Safety, Failure Minimisation and Analysis, Unhlansa Rock, SOUTH AFRICA, 24 - 28 July 2000

Fei D; Shankar K, 1999, 'Finite element modelling of deformation patterns in strong and weak adhesively bonded joints', in ACAM 99 2nd Australasian congress on applied mechanics, ACAM 99 2nd Australasian congress on applied mechanics, ADFA, Canberra, presented at ACAM 99 2nd Australasian congress on applied mechanics, ADFA, Canberra, 10 - 12 February 1999

Dhamari RD; Shankar K; Wei R, 1999, 'Effect of corrosion prevention compounds on fatigue life of double lap joints', in ACAM 99 2nd Australasian congress on applied mechanics, ACAM 99 2nd Australasian congress on applied mechanics, ADFA, Canberra, presented at ACAM 99 2nd Australasian congress on applied mechanics, ADFA, Canberra, 10 - 12 February 1999

Wei R; Shankar K, 1999, 'Influence of friction and fastener fit onload carrying behaviour of one-and-half dogbone joints', in ACAM 99 2nd Australasian congress on applied mechanics, ACAM 99 2nd Australasian congress on applied mechanics, ADFA, Canberra, presented at ACAM 99 2nd Australasian congress on applied mechanics, ADFA, Canberra, 10 - 12 February 1999

Fei D; Shankar K, 1999, 'Non destructive inspection of weak bonds in adhesively bonded joints', in ICCM 12, ICCM 12, Paris, Francs, pp. CD-R, presented at ICCM 12, Paris, Francs, 05 - 09 July 1999

Russo SG; Sharp PK; Dhamari RD; Hinton B; Shankar K; Clark G, (ed.), 1999, 'Effect of the environment and corrosion on the fatigue life of a simulated aircraft structural joint', in IAC 99, IAC 99, Adelaide, Sth Aust, pp. . - ., presented at IAC 99, Adelaide, Sth Aust, 13 - 15 September 1999

Shankar K; Dhamari RD, 1999, 'Influence of lubricating corrosion prevention compounds on fatigue behaviour of double lap joints', in ATEM 1999, ATEM`99, Ube City, Japan, pp. 705 - 709, presented at ATEM`99, Ube City, Japan, 21 - 24 July 1999

Shankar K; Li J, (ed.), 1998, 'Load Transfer Mechanism in Bolted Double Lap Joints', in ICAS 98, Congress of the International Council of the Aeronautical Sciences, ICAS`98, Melbourne, pp. CDRom, presented at ICAS`98, Melbourne, 01 September 1998

Shankar K; Tindall N; Hinton B; Salagaras M, (ed.), 1998, 'Effect of Aircraft Washing on the Life of Corrosion Prevention Compounds', in 2nd Joint NASA/FAA/DoD Conference on Aging Aircraft, 2nd Joint NASA/FAA/DoD Conference on Aging Aircraft, Williamsburg, USA, pp. 378 - 386, presented at 2nd Joint NASA/FAA/DoD Conference on Aging Aircraft, Williamsburg, USA, 01 August 1998

Shankar K; Fei D, (ed.), 1998, 'Modelling of Weak Bonds in Adhesively Fastened Joints', in 2nd Joint NASA/FAA/DoD Conference on Aging Aircraft, 2nd Joint NASA/FAA/DoD Conference on Aging Aircraft, Williamsburg, USA, pp. 875 - 884, presented at 2nd Joint NASA/FAA/DoD Conference on Aging Aircraft, Williamsburg, USA, 01 August 1998

Shankar K, 1997, 'Optical examination of load transfer in riveted lap joints using portable holographic interferometry', in Proceedings of SPIE - The International Society for Optical Engineering, pp. 158 - 163, presented at

Tahtali M; Shankar K, 1995, 'Effect of residual stresses on delaminations in polymer composites', in 14th ACMSM: Australasian Conference on the Mechanics of Structures and Materials, 14th ACMSM: Australasian Conference on the Mechanics of Structures and Materials, Hobart, presented at 14th ACMSM: Australasian Conference on the Mechanics of Structures and Materials, Hobart, 11 - 13 December 1995

Conference Proceedings (Editor of)

Chowdhury; shankar; ali; morozov, (eds.), 2014, 'DAMAGE DETECTION IN COMPOSITE PLATES USING TRANSIENT VIBRATION ANALYSIS', in DAMAGE DETECTION IN COMPOSITE PLATES USING TRANSIENT VIBRATION ANALYSIS, Composites Australia and CRC-ACS, Bangladesh, presented at Composites Australia and CRC-ACS 2014 Conference, Bangladesh, 07 - 09 April 2014

Conference Posters

Ramakrishnan KR; Guérard S; Shankar K; Viot P, (ed.), 2013, 'Development of a Finite Element Model for the study of the impact behaviour of sandwich panels', in Development of a Finite Element Model for the study of the impact behaviour of sandwich panels, 21 eme Congr es Fran cais de M ecanique, Bordeaux, presented at 21 eme Congr es Fran cais de M ecanique, Bordeaux, 26 - 30 August 2013

Conference Abstracts

Aryal B; Morozov E; Shankar K; Thabet A; Moore P, Effects of Ballistic Impact Damage on Mechanical Performance of Composite Honeycomb Sandwich Panels