Dr Tahseen Kamal

Research Associate
School of Engineering and Information Technology


Building 16 Room 302
School of Engineering and Information Technology
The University of New South Wales
Australian Defence Force Academy
PO Box 7916, Canberra BC ACT 2610, AUSTRALIA


Tahseen Kamal is a Research Associate working in the in the School of Engineering and Information Technology working with Dr. Andrew Lambert. Her primary project is on free-space laser communication. She recently obtained PhD on "Compact microscopy systems using non-conventional optical techniques", from Research School of Engineering, Australian National University. Her research focused on low-cost imaging prototype development where she specialized in moldless lens fabrication using liquid polymer, using 3D printed structures for engineering imaging prototypes and using Fourier Ptychography (FP) on moldless lens imaging. Previously, she was a Senior Lecturer and Lecturer spanning over a period of ~8 years in Electrical and Electronic Engineering, East West University, Dhaka, Bangladesh. Her previous major was computer science and engineering with research experience in digital system synthesis and optimisation using evolutionary algorithms (genetic algorithm). For her involvement in higher education teaching she has been recognised as Fellow of Higher Education Academy of UK. She is a passionate and dedicated researcher and educator in engineering. 

Journal articles

Kamal T; Yang L; Lee WM, 2018, 'In situ retrieval and correction of aberrations in moldless lenses using Fourier ptychography', Optics Express, vol. 26, pp. 2708 - 2719, http://dx.doi.org/10.1364/OE.26.002708

Kamal T; Watkins R; Cen Z; Rubinstein J; Kong G; Lee WM, 2017, 'Design and fabrication of a passive droplet dispenser for portable high resolution imaging system', Scientific Reports, vol. 7, http://dx.doi.org/10.1038/srep41482

Kamal T; He X; Lee WM, 2015, 'Reinventing the pocket microscope', InFocus magazine, Proceedings of the Royal Microscopical Society, vol. 37, pp. 41 - 43, http://dx.doi.org/https://arxiv.org/abs/1507.00589

Conference Papers

Kamal T; Chowdhury MT; Zubair MA; Al Mamun SMM, 2019, 'Crystal size and strain estimation of 10% Cu doped ZnO nanoparticles using X-ray diffraction data', in 4th International Conference on Electrical Engineering and Information and Communication Technology, iCEEiCT 2018, pp. 536 - 540, presented at , http://dx.doi.org/10.1109/CEEICT.2018.8628097

Kamal T; Yang L; Lee WM, 2017, 'Application of computational optics in moldless lenses', in Optics InfoBase Conference Papers, presented at , http://dx.doi.org/10.1364/3D.2017.JTu5A.14

Kamal T; Watkins R; Cen Z; Lee WM, 2016, 'Direct fabrication of silicone lenses with 3D printed parts', in Proceedings of SPIE - The International Society for Optical Engineering, presented at , http://dx.doi.org/10.1117/12.2242967

Kamal T; Rubinstein J; Watkins R; Cen Z; Kong G; Lee WM, 2016, 'Thimble microscope system', in Proceedings of SPIE - The International Society for Optical Engineering, presented at , http://dx.doi.org/10.1117/12.2242949

Khanom R; Kamal T; Khan MHA, 2008, 'Algorithm based synthesis of ternary reversible/quantum circuit', in Proceedings of 11th International Conference on Computer and Information Technology, ICCIT 2008, pp. 270 - 275, presented at , http://dx.doi.org/10.1109/ICCITECHN.2008.4803043

Kamal T; Khan MHA, 2008, 'An application specific integrated circuit for optimization of fixed polarity reed-muller expressions', in Proceedings of ICECE 2008 - 5th International Conference on Electrical and Computer Engineering, pp. 721 - 726, presented at , http://dx.doi.org/10.1109/ICECE.2008.4769303

Theses / Dissertations

Kamal T, 2018, Compact microscopy systems with non-conventional optical technique, thesis, Australian National University, Open Access Respository, ANU, http://hdl.handle.net/1885/148711