Publications

Book Chapters:

2015

 Tuttle, S.L., Davis, K., Johnson, S., Woodward, M., Neely, A., “MERS” – The Microgravity Recoverable Satellite, printed in “Inventive Ideas for Micro/Nano-Satellites – The MIC3 Report”, pp12-24, International Academy of Astronautics, ISBN 978-2-917761-38-0, 2015

 

Journals:

2016

Stibbard, M., Tuttle, S.L., Current Attainability of a Lunar Microsatellite Mission for Universities and Similar Institutions, Trans. JSASS Aerospace Tech. Japan, Vol. 14, No. ists30, pp. Pf_25-Pf_34, 2016

Oberst SM; Griffin D; Tuttle SL; Lambert A; Boyce R, 2016, 'An experimental validation of spring tape measures as thin-walled, elastic space structures', Thin Walled Structures

Goodwin M; Jenkins C; Lambert A, 2016, 'Generalized slope detection and ranging turbulence profiling at las campanas observatory', Monthly Notices of the Royal Astronomical Society, vol. 461, pp. 1701 - 1717, 10.1093/mnras/stw1417

Kong F; Lambert A, 2016, 'Improvements to the modal holographic wavefront sensor', Applied Optics, vol. 55, pp. 3615 - 3625, 10.1364/AO.55.003615

 

2015

Dudziak, R., Tuttle, S.L., Barraclough, S., Harpoon technology development for the active removal of space debris. Adv. Space Res., 2015, http://dx.doi.org/10.1016/j.asr.2015.04.012

 

Conferences:

2016

Barraclough, S. and Tuttle, S., Harpoon Tip Geometry and Energy Required for the Capture of Space Debris with Structure Assemblies, Final Stardust Conference on Asteroids and Space Debris, ESA ESTEC, The Netherlands, 31st October – 4th November 2016

Tuttle, S., Qaisar, S., Ryan, M., Addressing the Intangibles: Practical Steps for Small Satellite Risk Reduction, NATO Workshop on Best Practices for Risk Reduction for Overall Space Systems, Avila, Spain, 26-28 September 2016

Shimoda, T., Okuyama, K., Tuttle, S.L., Yamada, K., Kato, S., Nakayama, N. and Sahara, H., A Concept of Small Probe for Lunar Return and Earth Reentry, Japan Society of Mechanical Engineers Annual Meeting, Fukuoka, September, 2016

Yamanouchi, T., Okuyama, K., Szasz, B., Yoshio, H., Miyoshi, H., Kato, S., Shimoda, T., Tuttle, S., In depth Thermal Conduction of the Lightweight Ablator Series for Transfer Vehicle Systems (LATS) with a variety of Densities, Japan Society of Mechanical Engineers Annual Meeting, Fukuoka, September, 2016

Dudziak, R. and Tuttle, S., “Development of a Thermal Control System for Integration onto CubeSat Platforms”, 16th Australian Space Research Conference, Melbourne, 26-28 September 2016

Tuttle, S., Barraclough, S., Szasz, B., Okuyama, K., Shimoda, T., First Results of Testing the Re-entry Thermal Design of the “MERS” Recoverable Micro Satellite, 46th International Conference on Environmental Systems, 10-14 July 2016, Vienna, Austria

Tuttle, S. and Barraclough, S., Thermal Design of a Multi Mission Micro-Entry Capsule, 46th International Conference on Environmental Systems, 10-14 July 2016, Vienna, Austria

Barraclough, S. and Tuttle, S., Thermal Performance of the “MERS” Recoverable Micro Satellite in Orbit, 46th International Conference on Environmental Systems, 10-14 July 2016, Vienna, Austria

Qaisar S. U., Michael J. Ryan and Sean L. Tuttle, “A Framework for Small Satellite Architecture Design”, 26th Annual INCOSE International Symposium (IS 2016), Edinburgh, Scotland, UK, July 18-21, 2016.

Bright, C., Tuttle, S., Barraclough, S. & Neely, A., 2016, ‘Fluidic Thrust Vector Control for Rendezvous Missions’, 67th International Astronautical Congress (IAC), Guadalajara, Mexico, 26-30 September.

Cegarra Polo M, Lambert A, ‘Towards a Network of Small Aperture Telescopes with Adaptive Optics Correction Capability’, AMOS 2016, Hawaii, USA, 20 September 2016 - 23 September 2016. 

Cegarra Polo M, Alenin A, Vaughn I, Lambert A, ‘GEO Satellite Characterization Through Polarimetry Using Simultaneous Observations from Nearby Optical Sensors’, AMOS 2016, Hawaii, USA, 20 September 2016 - 23 September 2016. 

Hadipour M; Tahtali. M; Lambert. A, 2016, 'Dynamics of Vibrating Piezo-Membrane Mirror', in Dynamics of Vibrating Piezo-Membrane Mirror, OSA Technical Digest, Heidelberg Germany, presented at Adaptive Optics: Analysis, Methods & Systems, Heidelberg Germany, 25 - 28 July 2016, https://www.osapublishing.org/abstract.cfm?uri=AOMS-2016-AOT1C.3#Abstract

Cegarra Polo M; Lambert A, 2016, 'On-sky Tests for Astronomy and RSO Imaging in a Low Cost AO Testbed for Small Telescopes', in Imaging and Applied Optics 2016, Optical Society of America, Kongresshaus Stadthalle Heidelberg, Heidelberg, Germany, pp. AOTh2C.2 - AOTh2C.2, presented at Adaptive Optics: Analysis, Methods & Systems, Kongresshaus Stadthalle Heidelberg, Heidelberg, Germany, 25 July - 28 September 2016, 10.1364/AOMS.2016.AOTh2C.2

Horton A; Spitler L; Mathers N; Petkovic M; Griffin D; Barraclough S; Benson C; Dimitrijevic I; Lambert A; Previte A, 2016, 'The Australian space eye: Studying the history of galaxy formation with a CubeSat', in Proceedings of SPIE - The International Society for Optical Engineering, presented at , 10.1117/12.2232467

Hadipour M; Tahtali M; Lambert AJ, 2016, 'Vibrating membrane mirror concept for adaptive optics', in Proceedings of SPIE - The International Society for Optical Engineering, presented at , 10.1117/12.2231835

Brown M, et al, Low Earth Orbit interaction with the atmosphere, ASRC Melbourne 2016

Griffin D, et al, DST Group and UNSW Canberra Buccaneer Programme Status and Plans, ASRC Melbourne 2016

Dudziak R, et al, Passive Thermal Control System for CubeSats, ASRC Melbourne 2016

Qiao L,  et al, Knowledge exploration for CubeSat design trade space using multi-dimensional scaling and clustering, ASRC Melbourne 2016

Griffin D, et al, The Engineering of Space Flight Programmes in the Australian Context: a sustainable model, ASRC Melbourne 2016

Barraclough S, et al, Assessment and Verification of the Thermal Performance of the BRMM Spacecraft, ASRC Melbourne 2016

Smith B, et al, The Impact Of Lift And Drag On 6D of Motion Of Leo Objects : Formation Control And Debris Behaviour, ASRC Melbourne 2016

Dimitrijevic I, et al, Buccaneer Risk Mitigation Mission Assembly, Integration and Verification Programme, ASRC Melbourne 2016

The Australian Space Eye: studying the history of galaxy formation with a CubeSat. Horton A, Spitler L, Mathers N, Pektovic M, Griffin D, Barraclough S, Benson C, Dimitrijevic I, Lambert A, Previte A, Bowen J, Westerman S, Puig-Suari J, Reisenfeld S, Lawrence J, Zhelem R, Colless M, and Boyce R, Proc. SPIE, 2016

Hadipour M, Tahtali M, and Lambert A, Vibrating mirror concept for adaptive optics, SPIE Astronomical Telescopes + Instrumentation, 26 June - 1 July 2016, Edinburgh, United Kingdom.

Hadipour M, Tahtali M, Lambert A, Dynamics of Vibrating Piezo-Membrane Mirror, OSA Adaptive Optics, Heidelberg, Germany July 2016

Kong F, and Lambert A, An Improved Holographic Wavefront Sensor,  OSA Adaptive Optics, Heidelberg, Germany, July 2016

 

2015

Cegarra Polo M, Lambert A, ‘Low Cost Adaptive Optics Testbed for Small Aperture Telescopes’, AOIM, X International Workshop on Adaptive Optics for Industry and Medicine. CNR-Institute of Photonics, Padova, Italy, 15-19 June 2015

Lambert A, Cegarra Polo M, ‘Real-time algorithms implemented in hardware for centroiding on A Shack-Hartmann sensor’, Adaptive Optics: Analysis, Methods and Systems, AO 2015, Arlington, Virginia, United States, 07 June 2015 - 11 June 2015. Adaptive Optics: Analysis, Methods and Systems, AO 2015. 289. 2015

Pandey, S., Tuttle, S., Young, J.,  Computational study of the effect of Mars surface atmosphere induced thermal convection within horizontal gap enclosures on surface heat transfer characteristics within a Mars rover, Proceedings of the 15th Australian Space Research Conference, Canberra , September 29 - October 1, 2015 Australian Space Research Conference Series, Published in Australia in 2016 by National Space Society of Australia Ltd,  ISBN 13: 978-0-9775740-9-4, Editors: Wayne Short and Graziella Caprarelli

Bright, C., Tuttle, S., Neely, A., Stereolithographic 3D Printed Nozzles for Cold Gas Propulsion Experiments, Proceedings of the 15th Australian Space Research Conference, Canberra , September 29 - October 1, 2015 Australian Space Research Conference Series, Published in Australia in 2016 by National Space Society of Australia Ltd,  ISBN 13: 978-0-9775740-9-4, Editors: Wayne Short and Graziella Caprarelli

Qaisar, S.U., Tuttle, S.L., Ryan, M.J., Systems Engineering Essentials for Small Satellite Missions, Proceedings of the 15th Australian Space Research Conference, Canberra , September 29 - October 1, 2015 Australian Space Research Conference Series, Published in Australia in 2016 by National Space Society of Australia Ltd,  ISBN 13: 978-0-9775740-9-4, Editors: Wayne Short and Graziella Caprarelli

Oberst SM, Griffin D, Tuttle SL, Lambert A, Boyce RR, Analysis of thin curved flexible structures for space applications, Annual Conference of the Australian Acoustical Society, AAS'15, Hunter Valley, 15 Nov 2015 - 18 November 2015. Proceedings editors: Kessissoglou N, Doolan C. Proceedings of the Annual Meeting. 16 November 2015

Oberst S, Cartwright I, Teske T, Griffin D, Tuttle S, Lambert A, Lingard D, Boyce R, Sensitivity to micro-vibrations: damping of thin curved flexible space structures, Proceedings of the 15th Australian Space Research Conference, Canberra , September 29 - October 1, 2015 Australian Space Research Conference Series, Published in Australia in 2016 by National Space Society of Australia Ltd,  ISBN 13: 978-0-9775740-9-4, Editors: Wayne Short and Graziella Caprarelli.

Shimoda, T., Okuyama, K., Tuttle, S.L., Yamada, K., Kato, S., Nakayama, N. and Sahara, H., A Concept of Small Probe for Lunar Sample Return and Earth Reentry,  Japan Society of Mechanical Engineers Annual Meeting, Hokkaido, September 2015

Bright, C., Manoharan, R., Neely, A., Pandey, S., Tuttle, S., Van Pelt, H., Vennik, J., Venus Atmospheric Pathfinder Research Vehicle: A Mission Concept Study, 15th Australian Space Research Conference, 29 September -1 October, Canberra, Australia

Pandey, S., Zacny, K., Tuttle, S., Modelling Gas-Regolith Flow around Bends within a Pneumatic Sample Acquisition System for Mars Surface Environments, accepted for the 3rd International Future Mining Conference, 4-6 November 2015, Sydney, Australia

Woodward, M., Neely, A., Tuttle, S., Re-entry Trajectory Modelling for the Microgravity Experiment Recoverable Satellite, AIAA Spaceplanes Conference, Glasgow, July 2015

Tuttle, S.L., Advances in the Thermal Design of the “MERS” Satellite, 45th International Conference on Environmental Systems, July 12-16, 2015, Seattle, USA

Tuttle, S.L., Davis, K., Johnson, S., Woodward, M., Neely, A., A Concept for a Recoverable Microsatellite, 6th Nanosatellites Conference, 4-10 July, 2015, Kobe, Japan

Stibbard, M., Tuttle, S.L., Current Attainability of a Lunar Microsatellite Mission for Universities and Similar Institutions, 6th Nanosatellites Conference, 4-10 July, 2015, Kobe, Japan

Lambert A & Cegarra Polo M, Reconstructing from Extended Imagery of Space Objects, AMOS2015 Conference, Maui, Hawaii, USA. 13-19 September 2015.

Lambert A & Cegarra Polo M, Real-time astrometry using Phase Congruency, AMOS2015 Conference, Maui, Hawaii, USA. 13-19 September 2015.

Benson CR; Lambert A; Mahmud S, 2015, 'Predictability of GNSS signal characteristics in support of Space Situational Awareness using passive radar', in Past Papers 2015, presented at International GNSS Conference, Gold Coast, Queensland, Autralia, 14 - 16 July 2015

Oberst SM; Griffin D; Tuttle SL; Lambert A; Boyce RR, (eds.), 2015, 'Analysis of thin curved flexible structures for space applications', in Proceedings of the Annual Meeting, presented at Annual Conference of the Australian Acoustical

Lambert, A & Cegarra Polo, M , Real-time algorithms implemented in hardware for centroiding on a Shack-Hartmann Sensor, OSA Imaging and Applied Optics Congress, Arlington, VA, USA, June 2015. 3pp. http://dx.doi.org/10.1364/AOMS.2015.AOW3F.2

 

Other Articles:

2016

Thesis: Cegarra Polo M, Adaptive Optics for Small Aperture Telescopes, http://handle.unsw.edu.au/1959.4/55232, UNSW Canberra, School of Engineering and Information Technology